Wear resistant performance of highly cross-linked and annealed ultra-high molecular weight polyethylene against ceramic heads in total hip arthroplasty

Journal of Orthopaedic Research

Volumn 30, Issue 12, 2012, Pages 2031-2037

  Sato, Taishi ^a   Nakashima, Yasuharu ^a   Akiyama, Mio ^a   Yamamoto, Takuaki ^a   Mawatari, Taro ^a   Itokawa, Takashi ^a   Ohishi, Masanobu ^a   Motomura, Goro ^a   Hirata, Masanobu ^a   Iwamoto, Yukihide ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

annealing; cross linked; polyethylene; total hip arthroplasty; wear

Indexed keywords

ALUMINUM; COBALT CHROME; COBALT COMPLEX; CROSS LINKED ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; UNCLASSIFIED DRUG; ZIRCONIUM OXIDE;

ADULT; ARTICLE; CERAMIC PROSTHESIS; COMPARATIVE STUDY; CROSS LINKING; FEMALE; FEMUR HEAD; FEMUR HEAD PROSTHESIS; FOLLOW UP; HUMAN; MAJOR CLINICAL STUDY; MALE; MECHANICAL STRESS; PRIORITY JOURNAL; RETROSPECTIVE STUDY; TOTAL HIP PROSTHESIS;

AGED; ARTHROPLASTY, REPLACEMENT, HIP; CERAMICS; CROSS-LINKING REAGENTS; FEMALE; FEMUR HEAD; FOLLOW-UP STUDIES; HIP PROSTHESIS; HUMANS; MALE; MIDDLE AGED; OSTEOLYSIS; POLYETHYLENES; PROSTHESIS FAILURE; TIME FACTORS;

EID: 84867847911     PISSN: 07360266     EISSN: 1554527X     Source Type: Journal    
DOI: 10.1002/jor.22148     Document Type: Article

References (34)

1. Harris WH,. 1995. The problem is osteolysis. Clin Orthop Relat Res 311: 46-53.
2. Goodman SB, Ma T,. 2010. Cellular chemotaxis induced by wear particles from joint replacements. Biomaterials 31: 5045-5050.
3. Sochart DH,. 1999. Relationship of acetabular wear to osteolysis and loosening in total hip arthroplasty. Clin Orthop Relat Res 363: 135-150.
4. Collier JP, Currier BH, Kennedy FE, et al. 2003. Comparison of cross-linked polyethylene materials for orthopaedic applications. Clin Orthop Relat Res 414: 289-304.
5. Manning DW, Chiang PP, Martell JM, et al. 2005. In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty. J Arthroplasty 20: 880-886.
6. Ise K, Kawanabe K, Tamura J, et al. 2009. Clinical results of the wear performance of cross-linked polyethylene in total hip arthroplasty: prospective randomized trial. J Arthroplasty 24: 1216-1220.
7. Engh CA Jr, Stepniewski AS, Ginn SD, et al. 2006. A randomized prospective evaluation of outcomes after total hip arthroplasty using cross-linked marathon and non-cross-linked enduron polyethylene liners. J Arthroplasty 21: 17-25.
8. Kurtz SM, Gawel HA, Patel JD,. 2011. History and systematic review of wear and osteolysis outcomes for first-generation highly crosslinked polyethylene. Clin Orthop Relat Res 469: 2262-2277.
9. Derbyshire B, Fisher J, Dowson D, et al. 1994. Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints. Med Eng Phys 16: 229-236.
10. Geller JA, Malchau H, Bragdon C, et al. 2006. Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res 447: 53-59.
11. Nakahara I, Nakamura N, Nishii T, et al. 2010. Minimum five-year follow-up wear measurement of longevity highly cross-linked polyethylene cup against cobalt-chromium or zirconia heads. J Arthroplasty 25: 1182-1187.
12. Lachiewicz PF, Heckman DS, Soileau ES, et al. 2009. Femoral head size and wear of highly cross-linked polyethylene at 5 to 8 years. Clin Orthop Relat Res 467: 3290-3296.
13. Agins HJ, Alcock NW, Bansal M, et al. 1988. Metallic wear in failed titanium-alloy total hip replacements. A histological and quantitative analysis. J Bone Joint Surg Am 70: 347-356.
14. Saikko VO, Paavolainen PO, Slatis P,. 1993. Wear of the polyethylene acetabular cup. metallic and ceramic heads compared in a hip simulator. Acta Orthop Scand 64: 391-402.
15. Kumar P, Oka M, Ikeuchi K, et al. 1991. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy. J Biomed Mater Res 25: 813-828.
16. Stilling M, Nielsen KA, Soballe K, et al. 2009. Clinical comparison of polyethylene wear with zirconia or cobalt-chromium femoral heads. Clin Orthop Relat Res 467: 2644-2650.
17. Liang B, Kawanabe K, Ise K, et al. 2007. Polyethylene wear against alumina and zirconia heads in cemented total hip arthroplasty. J Arthroplasty 22: 251-257.
18. Nakashima Y, Hayashi K, Inadome T, et al. 1997. Hydroxyapatite-coating on titanium arc sprayed titanium implants. J Biomed Mater Res 35: 287-298.
19. d'Aubigne RM, Postel M,. 2009. The classic: functional results of hip arthroplasty with acrylic prosthesis. 1954. Clin Orthop Relat Res 467: 7-27.
20. Devane PA, Horne JG,. 1999. Assessment of polyethylene wear in total hip replacement. Clin Orthop Relat Res 369: 59-72.
21. McCalden RW, MacDonald SJ, Rorabeck CH, et al. 2009. Wear rate of highly cross-linked polyethylene in total hip arthroplasty. A randomized controlled trial. J Bone Joint Surg Am 91: 773-782.
22. Gencur SJ, Rimnac CM, Kurtz SM,. 2006. Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene. Biomaterials 27: 1550-1557.
23. Muratoglu OK, Bragdon CR, O'Connor DO, et al. 1999. Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE). Biomaterials 20: 1463-1470.
24. Röhrl MR, Nirbrant B, Nilsson KG,. 2012. No adverse effect of submelt-annealed highly crosslinked polyethylene in cemented cups. Acta Orthop 83: 148-152.
25. Meding JB, Keating EM, Davis KE,. 2011. Acetabular UHMWPE survival and wear changes with manufacturing techniquies. Clin Orthop Res 469: 405-411.
26. Waewsawangwong W, Goodman SB,. 2012. Unexpected failure of highly cross-linked polyethylene acetabular liner. J Arthroplasty 27: 1-4.
27. Crowninshield RD, Maloney WL, Wentz DH,. 2004. Biomechanics of large heads. Clin Orthop Res 429: 102-107.
28. Georgiades G, Babis GC, Kourlaba G, et al. 2010. Effect of cementless acetabular component in total hip arthroplasty for congenital hip disease. J Arthroplasty 25: 1143-1150.
29. Haraguchi K, Sugano N, Nishii T, et al. 2001. Phase transformation of a zirconia ceramic head after total hip arthroplasty. J Bone Joint Surg Br 83: 996-1000.
30. Higuchi F, Shiba N, Inoue A, et al. 1995. Fracture of an alumina ceramic head in total hip arthroplasty. J Arthroplasty 10: 851-854.
31. Kawate K, Ohmura T, Kawahara I, et al. 2009. Differences in highly cross-linked polyethylene wear between zirconia and cobalt-chromium femoral heads in Japanese patients: a prospective, randomized study. J Arthroplasty 24: 1221-1224.
32. Hirakawa K, Bauer TW, Hashimoto Y, et al. 1997. Effect of femoral head diameter on tissue concentration of wear debris. J Biomed Mater Res 36: 529-535.
33. Hammerberg EM, Wan Z, Dastane M, et al. 2010. Wear and range of motion of different femoral head sizes. J Arthroplasty 25: 839-843.
34. Mall NA, Nunley RM, Zhu JJ, et al. 2011. The incidence of acetabular osteolysis in young patients with conventional versus highly crosslinked polyethylene. Clin Orthop Relat Res 469: 372-381.