Minimum Five-Year Follow-Up Wear Measurement of Longevity Highly Cross-Linked Polyethylene Cup Against Cobalt-Chromium or Zirconia Heads

Journal of Arthroplasty

Volumn 25, Issue 8, 2010, Pages 1182-1187

  Nakahara, Ichiro ^a   Nakamura, Nobuo ^b   Nishii, Takashi ^a,c   Miki, Hidenobu ^d   Sakai, Takashi ^a   Sugano, Nobuhiko ^a,c  

^a OSAKA UNIVERSITY   (Japan)

^b Kyowakai Hospital   (Japan)

^c OSAKA UNIVERSITY GRADUATE SCHOOL OF MEDICINE   (Japan)

^d OSAKA NATIONAL HOSPITAL   (Japan)

Author keywords

Highly cross linked polyethylene; Osteolysis; Total hip arthroplasty; Wear; Zirconia

Indexed keywords

CHROMIUM; COBALT; POLYETHYLENE; ZIRCONIUM;

ADULT; AGED; ARTICLE; BONE NECROSIS; CLINICAL TRIAL; FEMALE; FEMUR NECK FRACTURE; FOLLOW UP; HIP DISEASE; HIP OSTEOARTHRITIS; HUMAN; MAJOR CLINICAL STUDY; MALE; OSTEOARTHRITIS; OSTEOLYSIS; RAPIDLY DESTRUCTIVE COXOPATHY; RHEUMATOID ARTHRITIS; TOTAL HIP PROSTHESIS;

ADULT; AGED; ARTHROPLASTY, REPLACEMENT, HIP; CHROMIUM ALLOYS; COHORT STUDIES; FEMALE; FEMUR HEAD; FOLLOW-UP STUDIES; HIP PROSTHESIS; HUMANS; INCIDENCE; MALE; MIDDLE AGED; OSTEOARTHRITIS, HIP; OSTEOLYSIS; POLYETHYLENE; PROSPECTIVE STUDIES; PROSTHESIS FAILURE; ZIRCONIUM;

EID: 78249273640     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2009.09.006     Document Type: Article

References (37)

1. Dumbleton J.H., Manley M.T., Edidin A.A. A literature review of the association between wear rate and osteolysis in total hip arthroplasty. J Arthroplasty 2002, 17:649.
2. Harris W.H. The problem is osteolysis. Clin Orthop Relat Res 1995, 311:46.
3. Muratoglu O.K., Bragdon C.R., O'Connor D.O., et al. A novel method of cross-linking UHMWPE to improve wear, reduce oxidation, and retain mechanical properties. J Arthroplasty 2001, 16:149.
4. Harris W.H. Highly cross-linked, electron-beam-irradiated, melted polyethylene: some pros. Clin Orthop Relat Res 2004, 429:63.
5. McKellop H., Shen F.W., Lu B., et al. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements. J Orthop Res 1999, 17:157.
6. Kumar P., Oka M., Ikeuchi K., et al. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy. J Biomed Mater Res 1991, 25:813.
7. Skinner H.B. Ceramic bearing surfaces. Clin Orthop Relat Res 1999, 369:83.
8. Zichner L.P., Willert H.G. Comparison of alumina-polyethylene and metal-polyethylene in clinical trials. Clin Orthop Relat Res 1992, 282:86.
9. Schuller H.M., Marti R.K. Ten-year socket wear in 66 hip arthroplasties. Ceramic versus metal heads. Acta Orthop Scand 1990, 61:240.
10. Callaway G.H., Flynn W., Ranawat C.S., et al. Fracture of the femoral head after ceramic-on-polyethylene total hip arthroplasty. J Arthroplasty 1995, 10:855.
11. Fritsch E.W., Gleitz M. Ceramic femoral head fractures in total hip arthroplasty. Clin Orthop Relat Res 1996, 328:129.
12. Cales B. Zirconia as a sliding material: histologic, laboratory, and clinical data. Clin Orthop Relat Res 2000, 379:94.
13. Christel P., Meunier A., Heller M., et al. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989, 23:45.
14. Kim Y.H. Comparison of polyethylene wear associated with cobalt-chromium and zirconia heads after total hip replacement. a prospective, randomized study. J Bone Joint Surg Am 2005, 87:1769.
15. Manning D.W., Chiang P.P., Martell J.M., et al. In vivo comparative wear study of traditional and highly cross-linked polyethylene in total hip arthroplasty. J Arthroplasty 2005, 20:880.
16. Bragdon C.R., Barrett S., Martell J.M., et al. Steady-state penetration rates of electron beam-irradiated, highly cross-linked polyethylene at an average 45-month follow-up. J Arthroplasty 2006, 21:935.
17. Dorr L.D., Wan Z., Shahrdar C., et al. Clinical performance of a Durasul highly cross-linked polyethylene acetabular liner for total hip arthroplasty at five years. J Bone Joint Surg Am 2005, 87:1816.
18. D'Antonio J.A., Manley M.T., Capello W.N., et al. Five-year experience with Crossfire highly cross-linked polyethylene. Clin Orthop Relat Res 2005, 441:143.
19. Martell J.M., Verner J.J., Incavo S.J. Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J Arthroplasty 2003, 18(Suppl 1):55.
20. Digas G., Karrholm J., Thanner J., et al. The Otto Aufranc Award. Highly cross-linked polyethylene in total hip arthroplasty: randomized evaluation of penetration rate in cemented and uncemented sockets using radiostereometric analysis. Clin Orthop Relat Res 2004, 429:6.
21. Merle d'Aubigne R., Postel M. Functional results of hip arthroplasty with acrylic prosthesis. J Bone Joint Surg 1954, 36:451.
22. Amstutz H.C., Thomas B.J., Jinnah R., et al. Treatment of primary osteoarthritis of the hip. a comparison of total joint and surface replacement arthroplasty. J Bone Joint Surg Am 1984, 66:228.
23. DeLee J.G., Charnley J. Radiological demarcation of cemented sockets in total hip replacement. Clin Orthop Relat Res 1976, 121:20.
24. Gruen T.A., McNeice G.M., Amstutz H.C. "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. Clin Orthop 1979, 141:17.
25. Devane P.A., Horne J.G. Assessment of polyethylene wear in total hip replacement. Clin Orthop Relat Res. 1999, 369:59.
26. Geller J.A., Malchau H., Bragdon C., et al. Large diameter femoral heads on highly cross-linked polyethylene: minimum 3-year results. Clin Orthop Relat Res 2006, 447:53.
27. Livermore J., Ilstrup D., Morrey B. Effect of femoral head size on wear of the polyethylene acetabular component. J Bone Joint Surg Am 1990, 72:518.
28. Pedersen D.R., Callaghan J.J., Johnston T.L., et al. Comparison of femoral head penetration rates between cementless acetabular components with 22-mm and 28-mm heads. J Arthroplasty 2001, 16(Suppl 1):111.
29. Muratoglu O.K., Bragdon C.R., O'Connor D., et al. Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept. J Arthroplasty 2001, 16(Suppl 1):24.
30. Minakawa H., Stone M.H., Wroblewski B.M., et al. Quantification of third-body damage and its effect on UHMWPE wear with different types of femoral head. J Bone Joint Surg Br 1998, 80:894.
31. Clarke I.C., Manaka M., Green D.D., et al. Current status of zirconia used in total hip implants. J Bone Joint Surg Am 2003, 85(Suppl 4):73.
32. Haraguchi K., Sugano N., Nishii T., et al. Phase transformation of zirconia ceramic head after total hip arthroplasty. J Bone Joint Surg Br 2001, 83:996.
33. Allain J., Le Mouel S., Goutallier D., et al. Poor eight-year survival of cemented zirconia-polyethylene total hip replacements. J Bone Joint Surg Br 1999, 81:835.
34. Hernigou P., Bahrami T. Zirconia and alumina ceramics in comparison with stainless-steel heads. Polyethylene wear after a minimum ten-year follow-up. J Bone Joint Surg Br 2003, 85:504.
35. Kraay M.J., Thomas R.D., Rimnac C.M., et al. Zirconia versus Co-Cr femoral heads in total hip arthroplasty: early assessment of wear. Clin Orthop Relat Res 2006, 453:86.
36. Hayaishi Y., Miki H., Yoshikawa H., et al. Phase transformation of a new generation yttria-stabilized zirconia femoral head after total hip arthroplasty. Mod Rheumatol 2008, 18:647.
37. Moore K.D., Barrack R.L., Sychterz C.J., et al. The effect of weight-bearing on the radiographic measurement of the position of the femoral head after total hip arthroplasty. J Bone Joint Surg Am 2000, 82:62.