Clinical Results of the Wear Performance of Cross-Linked Polyethylene in Total Hip Arthroplasty. Prospective Randomized Trial

Journal of Arthroplasty

Volumn 24, Issue 8, 2009, Pages 1216-1220

  Ise, Kentaro ^a   Kawanabe, Keiichi ^a   Tamura, Jiro ^a   Akiyama, Haruhiko ^a   Goto, Koji ^a   Nakamura, Takashi ^a  

^a KYOTO UNIVERSITY   (Japan)

Author keywords

clinical result; cross linked polyethylene; prospective randomized trial; total hip arthroplasty; wear

Indexed keywords

CROSS LINKED POLYETHYLENE; POLYETHYLENE; STAINLESS STEEL; UNCLASSIFIED DRUG; ZIRCONIUM OXIDE;

ADULT; ARTICLE; CLINICAL ARTICLE; CLINICAL TRIAL; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; FEMALE; FEMUR HEAD NECROSIS; FOLLOW UP; HIP OSTEOARTHRITIS; HIP RADIOGRAPHY; HUMAN; IMAGE ANALYSIS; MALE; MECHANICAL STRESS; OUTCOME ASSESSMENT; POSTOPERATIVE PERIOD; PROSTHESIS MATERIAL; RANDOMIZED CONTROLLED TRIAL; RHEUMATOID ARTHRITIS; STRESS STRAIN RELATIONSHIP; TOTAL HIP PROSTHESIS;

AGED; ARTHROPLASTY, REPLACEMENT, HIP; BIOCOMPATIBLE MATERIALS; FEMALE; FOLLOW-UP STUDIES; HIP PROSTHESIS; HUMANS; JOINT DISEASES; MALE; MIDDLE AGED; POLYETHYLENE; PROSPECTIVE STUDIES; PROSTHESIS FAILURE; TREATMENT OUTCOME;

EID: 71549117051     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2009.05.020     Document Type: Article

References (33)

1. Callaghan J.J., Templeton J.E., Liu S.S., et al. Results of Charnley total hip arthroplasty at a minimum of thirty years. A concise follow-up of a previous report. J Bone Joint Surg Am 86 (2004) 690
2. Fiorito S., Magrini L., and Goalard C. Pro-inflammatory and anti-inflammatory circulating cytokines and periprosthetic osteolysis. J Bone Joint Surg Br 85 (2003) 1202
3. Wroblewski B.M., Siney P.D., and Fleming P.A. Charnley low-frictional torque arthroplasty in patients under the age of 51 years. Follow-up to 33 years. J Bone Joint Surg Br 84 (2002) 540
4. Duffy G.P., Prpa B., Rowland C.M., et al. Primary uncemented Harris-Galante acetabular components in patients 50 years old or younger: results at 10 to 12 years. Clin Orthop 427 (2004) 157
5. Smith S.E., Estok Jr. D.M., and Harris W.H. 20-year experience with cemented primary and conversion total hip arthroplasty using so-called second-generation cementing techniques in patients aged 50 years or younger. J Arthroplasty 15 (2000) 263
6. Ingham E., and Fisher J. The role of macrophages in osteolysis of total joint replacement. Biomaterials. 26 (2005) 1271
7. Sabokbar A., Kudo O., and Athanasou N.A. Two distinct cellular mechanisms of osteoclast formation and bone resorption in periprosthetic osteolysis. J Orthop Res 21 (2003) 73
8. Claus A.M., Engh Jr. C.A., Sychterz C.J., et al. Relationship between polyethylene wear and osteolysis in hips with a second-generation porous-coated cementless cup after seven years of follow-up. J Bone Joint Surg Am 85 (2003) 1095
9. Iwase T., Wingstrand I., Persson B.M., et al. The ScanHip total hip arthroplasty: radiographic assessment of 72 hips after 10 years. Acta Orthop Scand 73 (2002) 54
10. Dowd J.E., Sychterz C.J., Young A.M., et al. Characterization of long-term femoral-head-penetration rates. Association with and prediction of osteolysis. J Bone Joint Surg Am 82 (2000) 1102
11. Wan Z., and Dorr L.D. Natural history of femoral focal osteolysis with proximal ingrowth smooth stem implant. J Arthroplasty 11 (1996) 718
12. Muratoglu O.K., Bragdon C.R., O'Connor D.O., et al. A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award. J Arthroplasty 16 (2001) 149
13. Wroblewski B.M., Siney P.D., and Fleming P.A. Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A ten-year follow-up report. J Bone Joint Surg Br 81 (1999) 54
14. Amstutz H.C., Thomas B.J., Jinnah R., et al. Treatment of primary osteoarthritis of the hip. A comparison of total joint and surface replacement arthroplasty. J Bone Joint Surg Am 66 (1984) 228
15. Dall D. Exposure of the hip by anterior osteotomy of the greater trochanter. A modified anterolateral approach. J Bone Joint Surg Br 68 (1986) 382
16. Wolfgang G.L. Femoral head autografting with total hip arthroplasty for lateral acetabular dysplasia. A 12-year experience. Clin Orthop 255 (1990) 173
17. Oishi C.S., Walker R.H., and Colwell Jr. C.W. The femoral component in total hip arthroplasty. Six to eight-year follow-up of one hundred consecutive patients after use of a third-generation cementing technique. J Bone Joint Surg Am 76 (1994) 1130
18. Sychterz C.J., Engh Jr. C.A., Shah N., et al. Radiographic evaluation of penetration by the femoral head into the polyethylene liner over time. J Bone Joint Surg Am 79 (1997) 1040
19. Tanaka K., Tamura J., Kawanabe K., et al. Effect of alumina femoral heads on polyethylene wear in cemented total hip arthroplasty. Old versus current alumina. J Bone Joint Surg Br 85 (2003) 655
20. Livermore J., Ilstrup D., and Morrey B. Effect of femoral head size on wear of the polyethylene acetabular component. J Bone Joint Surg Am 72 (1990) 518
21. Hashimoto Y., Bauer T.W., Jiang M., et al. Polyethylene wear in total hip arthroplasty: volumetric wear measurement of retrieved acetabular components. Trans Orthop Res Soc 20 (1995) 116
22. Digas G., Karrholm J., Thanner J., et al. Highly cross-linked polyethylene in total hip arthroplasty: randomized evaluation of penetration rate in cemented and uncemented sockets using radiostereometric analysis. Clin Orthop 429 (2004) 6
23. Harris W.H., and Muratoglu O.K. A review of current cross-linked polyethylenes used in total joint arthroplasty. Clin Orthop 430 (2005) 46
24. Clarke I.C., Manaka M., Green D.D., et al. Current status of zirconia used in total hip implants. J Bone Joint Surg Am 85 Suppl 4 (2003) 73
25. Sakoda H., Voice A.M., McEwen H.M., et al. A comparison of the wear and physical properties of silane cross-linked polyethylene and ultra-high molecular weight polyethylene. J Arthroplasty 16 (2001) 1018
26. Nakamura T., Tanaka K., Tamura J., et al. Clinical and laboratory wear studies of zirconia-on-UHMWPE combination in cementless THA. Key Eng Mater 240-242 (2003) 832
27. Christel P.S. Biocompatibility of surgical-grade dense polycrystalline alumina. Clin Orthop Relat Res 282 (1992) 10
28. Clarke I.C., and Gustafson A. Clinical and hip simulator comparisons of ceramic-on-polyethylene and metal-on-polyethylene wear. Clin Orthop Relat Res 379 (2000) 34
29. Haraguchi K., Sugano N., Nishii T., et al. Phase transformation of a zirconia ceramic head after total hip arthroplasty. J Bone Joint Surg Br 83 (2001) 996
30. Santos E.M., Vohra S., Catledge S.A., et al. Examination of surface and material properties of explanted zirconia femoral heads. J Arthroplasty 19 Suppl 2 (2004) 30
31. Lu Z., and McKellop H. Frictional heating of bearing materials tested in a hip joint wear simulator. Proc Inst Mech Eng (H) 211 (1997) 101
32. Scott M., Morrison M., Mishra S.R., et al. Particle analysis for the determination of UHMWPE wear. J Biomed Mater Res B Appl Biomater 73 (2005) 325
33. Green T.R., Fisher J., Matthews J.B., et al. Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles. J Biomed Mater Res 53 (2000) 90