Scaffold library for tissue engineering: A geometric evaluation

Computational and Mathematical Methods in Medicine

Volumn 2012, Issue , 2012, Pages

  Chantarapanich, Nattapon ^a   Puttawibul, Puttisak ^a   Sucharitpwatskul, Sedthawatt ^b   Jeamwatthanachai, Pongnarin ^a   Inglam, Samroeng ^c   Sitthiseripratip, Kriskrai ^b  

^a PRINCE OF SONGKLA UNIVERSITY   (Thailand)

^b NATIONAL SCIENCE AND TECHNOLOGY DEVELOPMENT AGENCY   (Thailand)

^c THAMMASAT UNIVERSITY   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; COMPOSITE STRUCTURES; COMPUTER AIDED DESIGN; FUNCTION EVALUATION; LIBRARIES; PORE SIZE; TISSUE;

CELLULAR SCAFFOLDS; COMPUTER AIDED DESIGN MODELS; CONSTANT POROSITIES; DIFFERENT PORE SIZES; MANUFACTURING TECHNOLOGIES; POLYHEDRON MODELS; REINFORCED SCAFFOLDS; TISSUE ENGINEERING SCAFFOLD;

SCAFFOLDS (BIOLOGY);

TISSUE SCAFFOLD; BIOMATERIAL; POLYESTER; POLYMER;

ARTICLE; CHEMICAL STRUCTURE; COMPUTER AIDED DESIGN; MATHEMATICAL ANALYSIS; MATHEMATICAL MODEL; MICROTECHNOLOGY; MOLECULAR LIBRARY; MOLECULAR SIZE; POROSITY; TISSUE ENGINEERING; ALGORITHM; ANIMAL; BIOLOGY; CHEMISTRY; FINITE ELEMENT ANALYSIS; HUMAN; METHODOLOGY; THEORETICAL MODEL;

ALGORITHMS; ANIMALS; BIOCOMPATIBLE MATERIALS; COMPUTATIONAL BIOLOGY; COMPUTER-AIDED DESIGN; FINITE ELEMENT ANALYSIS; HUMANS; MODELS, THEORETICAL; POLYESTERS; POLYMERS; POROSITY; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84867846867     PISSN: 1748670X     EISSN: 17486718     Source Type: Journal    
DOI: 10.1155/2012/407805     Document Type: Article

References (46)

1. Atala A., Regenerative medicine: past and present. Medicine Studies 2009 1 1 11 31
2. Vallet-Pichard A., Fontaine H., Mallet V., Pol S., VIRAL hepatitis in solid organ transplantation other than liver. Journal of Hepatology 2011 55 2 474 482 2-s2.0-79960443953 10.1016/j.jhep.2011.01.003
3. Chernchujit B., Suntharapa T., Niampoog S., Siripakarn Y., Minimally invasive open wedge high tibial osteotomy with press-fit tricortical bone graft. Journal of the Medical Association of Thailand 2009 92 supplement 6 S104 S108 2-s2.0-77950362260
4. Martinez A. A., Calvo A., Domingo J., Cuenca J., Herrera A., Malillos M., Allograft reconstruction of segmental defects of the humeral head associated with posterior dislocations of the shoulder. Injury 2008 39 3 319 322 2-s2.0-39149120227 10.1016/j.injury.2007.11.017
5. Salama R., Weissman S. L., The clinical use of combined xenografts of bone and autologous red marrow. A preliminary report. Journal of Bone and Joint Surgery B 1978 60 1 111 115 2-s2.0-0017837740
6. Sgaglione N. A., Moynihan D. P., Uggen C., The use of allografts in high tibial osteotomy: opening wedge technique. Operative Techniques in Sports Medicine 2007 15 2 72 80 2-s2.0-33847635268 10.1053/j.otsm.2006.07.004
7. Barbier O., Bajard X., Bouchard A., Ollat D., Marchaland J. P., Nguyen L., Versier G., Osteochondral allograft reconstruction of segmental defect of humeral head after posterior dislocation of the shoulder. European Journal of Orthopaedic Surgery and Traumatology 2010 20 7 581 585 2-s2.0-78049337118 10.1007/s00590-010-0610-z
8. Woesz A., Bidanda B., Bártolo P. J., Rapid prototyping to produce porous scaffolds with controlled architecture for possible use in bone tissue engineering. Virtual Prototyping & Bio Manufacturing in Medical Applications 2008 Springer 171 206
9. Marler J. J., Upton J., Langer R., Vacanti J. P., Transplantation of cells in matrices for tissue regeneration. Advanced Drug Delivery Reviews 1998 33 1-2 165 182 2-s2.0-0032479779 10.1016/S0169-409X(98)00025-8
10. Morsi Y. S., Wong C. S., Patel S. S., Bidanda B., Bártolo P. J., Conventional manufacturing processes for three-dimensional scaffolds. Virtual Prototyping & Bio Manufacturing in Medical Applications 2008 Springer 129 148
11. Bártolo P. J., Almeida H. A., Rezende R. A., Laoui T., Bidanda B., Bidanda B., Bártolo P. J., Advanced processes to fabricate scaffolds for tissue engineering. Virtual Prototyping & Bio Manufacturing in Medical Applications 2008 Springer 149 170
12. Cortesini R., Stem cells, tissue engineering and organogenesis in transplantation. Transplant Immunology 2005 15 2 81 89 2-s2.0-30444435767 10.1016/j.trim.2005.09.013
13. Liu C., Xia Z., Czernuszka J. T., Design and development of three-dimensional scaffolds for tissue engineering. Chemical Engineering Research and Design 2007 85 7 A 1051 1064 2-s2.0-34547764903 10.1205/cherd06196
14. Chen G., Ushida T., Tateishi T., Scaffold design for tissue engineering. Macromolecular Bioscience 2002 2 2 67 77
15. Zhao J., Lu X., Duan K., Guo L. Y., Zhou S. B., Weng J., Improving mechanical and biological properties of macroporous HA scaffolds through composite coatings. Colloids and Surfaces B 2009 74 1 159 166 2-s2.0-70349269056 10.1016/j.colsurfb.2009.07.012
16. Aly A. F., Agameia A., Eldesouky A. S., Sharaf M. A., Bioceramic bone scaffolds for tissue engineering. Journal of Applied Sciences Research 2010 6 11 1712 1721 2-s2.0-78650482988
17. Jones J. R., Ehrenfried L. M., Hench L. L., Optimising bioactive glass scaffolds for bone tissue engineering. Biomaterials 2006 27 7 964 973 2-s2.0-27644562796 10.1016/j.biomaterials.2005.07.017
18. Almeida H. D. A., da Silva Bártolo P. J., Virtual topological optimisation of scaffolds for rapid prototyping. Medical Engineering and Physics 2010 32 7 775 782 2-s2.0-77955276092 10.1016/j.medengphy.2010.05.001
19. Cahill S., Lohfeld S., McHugh P. E., Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering. Journal of Materials Science 2009 20 6 1255 1262 2-s2.0-67349185857 10.1007/s10856-009-3693-5
20. Hollister S. J., Maddox R. D., Taboas J. M., Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 2002 23 20 4095 4103 2-s2.0-0035988665 10.1016/S0142-9612(02)00148-5
21. Armillotta A., Pelzer R., Modeling of porous structures for rapid prototyping of tissue engineering scaffolds. International Journal of Advanced Manufacturing Technology 2008 39 5-6 501 511 2-s2.0-53549125547 10.1007/s00170-007-1247-x
22. Chua C. K., Leong K. F., Cheah C. M., Chua S. W., Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: Investigation and classification. International Journal of Advanced Manufacturing Technology 2003 21 4 291 301 2-s2.0-0037275050 10.1007/s001700300034
23. Leong K. F., Cheah C. M., Chua C. K., Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 2003 24 13 2363 2378 2-s2.0-0037409864 10.1016/S0142-9612(03)00030- 9
24. Yang S., Leong K. F., Du Z., Chua C. K., The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Engineering 2001 7 6 679 689 2-s2.0-0035671158 10.1089/107632701753337645
25. Yeong W. Y., Chua C. K., Leong K. F., Chandrasekaran M., Rapid prototyping in tissue engineering: challenges and potential. Trends in Biotechnology 2004 22 12 643 652 2-s2.0-8144227180 10.1016/j.tibtech.2004.10.004
26. Lan H., Web-based rapid prototyping and manufacturing systems: a review. Computers in Industry 2009 60 9 643 656 2-s2.0-70349456653 10.1016/j.compind. 2009.05.003
27. Naing M. W., Chua C. K., Leong K. F., Wang Y., Fabrication of customised scaffolds using computer-aided design and rapid prototyping techniques. Rapid Prototyping Journal 2005 11 4 249 259 2-s2.0-23744499612 10.1108/ 13552540510612938
28. Bártolo P. J., Chua C. K., Almeida H. A., Chou S. M., Lim A. S. C., Biomanufacturing for tissue engineering: present and future trends. Virtual and Physical Prototyping 2009 4 4 203 216 2-s2.0-71449126497 10.1080/17452750903476288
29. Hollister S. J., Maddox R. D., Taboas J. M., Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 2002 23 20 4095 4103 2-s2.0-0035988665 10.1016/S0142-9612(02)00148-5
30. Chua C. K., Leong K. F., Cheah C. M., Chua S. W., Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: Parametric library and assembly program. International Journal of Advanced Manufacturing Technology 2003 21 4 302 312 2-s2.0-0037274766 10.1007/s001700300035
31. Fang Z., Starly B., Sun W., Computer-aided characterization for effective mechanical properties of porous tissue scaffolds. CAD Computer Aided Design 2005 37 1 65 72 2-s2.0-4544231126 10.1016/j.cad.2004.04.002
32. Wettergreen M. A., Bucklen B. S., Liebschner M. A. K., Sun W., Bidanda B., Bártolo P. J., CAD assembly process for bone replacement. Virtual Prototyping & Bio Manufacturing in Medical Applications 2008 Springer 87 111
33. Wettergreen M. A., Bucklen B. S., Sun W., Liebschner M. A. K., Computer-aided tissue engineering of a human vertebral body. Annals of Biomedical Engineering 2005 33 10 1333 1343 2-s2.0-27344448900 10.1007/s10439-005-6744-1
34. Bucklen B. S., Wettergreen W. A., Yuksel E., Liebschner M. A. K., Bone-derived CAD library for assembly of scaffolds in computer-aided tissue engineering. Virtual and Physical Prototyping 2008 3 1 13 23 2-s2.0-40749150702 10.1080/17452750801911352
35. Wenninger M. J., Polyhedron Models 1974 Cambridge University Press
36. Mullen L., Stamp R. C., Brooks W. K., Jones E., Sutcliffe C. J., Selective laser melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. Journal of Biomedical Materials Research B 2009 89 2 325 334 2-s2.0-65949109480 10.1002/jbm.b.31219
37. Zhou W. Y., Wang M., Cheung W. L., Ip W. Y., Eberli D., Selective laser sintering of poly(L-Lactide)/carbonated hydroxyapatite nanocomposite porous scaffolds for bone tissue engineering. Tissue Engineering 2010 Rijeka, Croatia InTech 179 204
38. Arcaute K., Mann B. K., Wicker R. B., Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells. Annals of Biomedical Engineering 2006 34 9 1429 1441 2-s2.0-33748960111 10.1007/s10439-006-9156-y
39. Alvarez K., Nakajima H., Metallic scaffolds for bone regeneration. Materials 2009 2 3 790 832
40. Campanelli S. L., Contuzzi N., Er M. J., Capabilities and performances of the selective laser melting process. New Trends in Technologies: Devices, Computer, Communication and Industrial Systems 2010 InTech 233 252
41. Leong K. F., Chua C. K., Sudarmadji N., Yeong W. Y., Engineering functionally graded tissue engineering scaffolds. Journal of the Mechanical Behavior of Biomedical Materials 2008 1 2 140 152 2-s2.0-38949174995 10.1016/j.jmbbm.2007.11.002
42. Mantila Roosa S. M., Kemppainen J. M., Moffitt E. N., Krebsbach P. H., Hollister S. J., The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in an in vivo model. Journal of Biomedical Materials Research A 2010 92 1 359 368 2-s2.0-73549098444 10.1002/jbm.a.32381
43. Oh S. H., Park I. K., Kim J. M., Lee J. H., In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. Biomaterials 2007 28 9 1664 1671 2-s2.0-33846188184 10.1016/j.biomaterials.2006.11.024
44. Rooppakhun S., Chantarapanich N., Chernchujit B., Mahaisavariya B., Sucharitpwatskul S., Sitthiseripratip K., Mechanical evaluation of stainless steel and titanium dynamic hip screws for trochanteric fracture. Proceedings of World Academy of Science, Engineering and Technology 2010 70 662 665 2-s2.0-78651544371
45. Cheung J. T. M., Zhang M., Leung A. K. L., Fan Y. B., Three-dimensional finite element analysis of the foot during standinga material sensitivity study. Journal of Biomechanics 2005 38 5 1045 1054 2-s2.0-15944382246 10.1016/j.jbiomech.2004.05.035
46. Sudarmadji N., Tan J. Y., Leong K. F., Chua C. K., Loh Y. T., Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. Acta Biomaterialia 2011 7 2 530 537 2-s2.0-78650720318 10.1016/j.actbio.2010.09.024