Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets

Journal of Materials Processing Technology

Volumn 213, Issue 2, 2013, Pages 129-135

  Galvao I ^a   Leal, R M ^a,b   Rodrigues, D M ^a   Loureiro, A ^a  

^a UNIVERSITY OF COIMBRA   (Portugal)

^b POLYTECHNIC INSTITUTE OF LEIRIA   (Portugal)

Author keywords

Copper; Friction stir welding; Mechanical properties; Microstructure; Shoulder geometry

Indexed keywords

COPPER; DEFECTS; GEOMETRY; GRAIN REFINEMENT; MECHANICAL PROPERTIES; MICROSTRUCTURE; WELDING; WELDS;

COPPER SHEETS; DEFECT-FREE; FRICTION STIR WELDS; INTERNAL DEFECTS; ROTATIONAL SPEED; TRAVERSE SPEED; WELDING CONDITIONS; WELDING PARAMETERS;

FRICTION STIR WELDING;

EID: 84867609305     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2012.09.016     Document Type: Article

References (29)

1. A. Arora, R. Nandan, A.P. Reynolds, and T. DebRoy Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments Scripta Materialia 60 2009 13 16
2. P. Biswas, and N.R. Mandal Effect of tool geometries on thermal history of FSW of AA1100 Welding Journal 90 2011 129-s-135-s
3. L. Cederqvist, C.D. Sorensen, A.P. Reynolds, and T. Oberg Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies Science and Technology of Welding & Joining 14 2009 178 184
4. T.I. Chashchukina, L.M. Voronova, M.V. Degtyarev, and D.K. Pokryshkina Deformation and dynamic recrystallization in copper at different deformation rates in Bridgman anvils The Physics of Metals and Metallography 111 2011 304 313
5. R. Crawford, G.E. Cook, A.M. Strauss, D.A. Hartman, and M.A. Stremler Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding Science and Technology of Welding & Joining 11 2006 657 665
6. Cui, S.; Chen, Z.W.; Robson, J.D.; 2010. Interrelationships among speeds, torque, and flow volumes during friction stir welding/processing. In: Proceedings of 8th International Symposium on Friction Stir Welding, Timmendorfer Strand, Germany.
7. C.J. Dawes, and W.M. Thomas Development of improved tool designs for friction stir welding of aluminium Proceedings of 1st International Symposium on Friction Stir Welding, Thousand Oaks CA, USA 1999
8. M. De Giorgi, A. Scialpi, F.W. Panella, and L.A.C. De Filippis Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints Journal of Mechanical Science and Technology 23 2009 26 35
9. C.B. Fuller Friction stir tooling: tool material and designs R.S. Mishra, M.W. Mahoney, Friction Stir Welding and Processing 2007 ASM International Ohio 7 35
10. F. Gratecap, G. Racineux, and S. Marya A simple methodology to define conical tool geometry and welding parameters in friction stir welding International Journal of Material Forming 1 2008 143 158
11. H. Hallberg, M. Wallin, and M. Ristinmaa Simulation of discontinuous dynamic recrystallization in pure Cu using a probabilistic cellular automaton Computational Materials Science 49 2010 25 34
12. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds Prediction of temperature distribution and thermal history during friction stir welding: input torque based model Science and Technology of Welding & Joining 8 2003 165 174
13. Y. Kim, H. Fujii, T. Sumura, T. Komazaki, and K. Nakata Three defect types in friction stir welding of aluminum die casting alloy Materials Science and Engineering A 415 2006 250 254
14. R. Leal, and A. Loureiro Defect formation in friction stir welding of aluminium alloys Materials Science Forum 455-456 2004 299 302
15. R.M. Leal, C. Leitão, A. Loureiro, D.M. Rodrigues, and P. Vilaça Material flow in heterogeneous friction stir welding of thin aluminium sheets: effect of shoulder geometry Materials Science and Engineering A 498 2008 384 391
16. R.M. Leal, N. Sakharova, P. Vilaça, D.M. Rodrigues, and A. Loureiro Effect of shoulder cavity and welding parameters on friction stir welding of thin copper sheets Science and Technology of Welding & Joining 16 2011 146 152
17. Y. Li, L.E. Murr, and J.C. McClure Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum Materials Science and Engineering A 271 1999 213 223
18. O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec Understanding the material flow path of friction stir welding process using unthreaded tools Journal of Materials Processing Technology 210 2010 603 609
19. T.R. McNelley, K. Oh-ishi, and A.P. Zhilyaev Microstructures and properties of copper alloys after friction stir welding/processing R.S. Mishra, M.W. Mahoney, Friction Stir Welding and Processing 2007 ASM International Ohio 155 175
20. M. Mehta, A. Arora, A. De, and T. DebRoy Tool geometry for friction stir welding - optimum shoulder diameter Metallurgical and Materials Transactions A 42 2011 2716 2722
21. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia Recent advances in friction-stir welding - process, weldment, structure and properties Progress in Materials Science 53 2008 980 1023
22. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel Science and Technology of Welding & Joining 11 2006 526 537
23. M.J. Peel, A. Steuwer, P.J. Withers, T. Dickerson, Q. Shi, and H. Shercliff Dissimilar friction stir welds in AA5083-AA6082. Part I: process parameter effects on thermal history and weld properties Metallurgical and Materials Transactions A 37 2006 2183 2193
24. R. Rai, A. De, H.K.D.H. Bhadeshia, and T. DebRoy Review: friction stir welding tools Science and Technology of Welding & Joining 16 2011 325 342
25. H. Schmidt, J. Hattel, and J. Wert An analytical model for the heat generation in friction stir welding Modelling and Simulation in Materials Science and Engineering 12 2004 143 157
26. A. Scialpi, M. De Giorgi, L. De Filippis, R. Nobile, and F. Panella Mechanical analysis of ultra-thin friction stir welding joined sheets with dissimilar and similar materials Materials and Design 29 2008 928 936
27. W.M. Thomas, K.I. Johnson, and C.S. Wiesner Friction stir welding - recent developments in tool and process technologies Advanced Engineering Materials 5 2003 485 490
28. G.M. Xie, Z.Y. Ma, and L. Geng Development of a fine-grained microstructure and the properties of a nugget zone in friction stir welded pure copper Scripta Materialia 57 2007 73 76
29. Y.H. Zao, S.B. Lin, F.X. Qu, and L. Wu Influence of pin geometry in material flow in friction stir welding process Materials Science and Technology 22 2006 45 50