Tool geometry for friction stir welding - Optimum shoulder diameter

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 42, Issue 9, 2011, Pages 2716-2722

  Mehta, M ^a   Arora, A ^b   De, A ^a   Debroy, T ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

^b PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EXPERIMENTAL DATA; GEOMETRIC PARAMETER; MATERIALS FLOW; PEAK TEMPERATURES; POWER REQUIREMENT; PREDICTIVE CAPABILITIES; SPINDLE POWER; THEORETICAL INVESTIGATIONS; THERMAL CYCLE; TOOL DESIGNS; TOOL GEOMETRY; TRIAL AND ERROR;

FRICTION; GAS WELDING; THREE DIMENSIONAL;

FRICTION STIR WELDING;

EID: 80052638735     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-0672-5     Document Type: Article

References (32)

1. H.K.D.H. Bhadeshia and T. DebRoy: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 193-96.
2. T. DebRoy and H.K.D.H. Bhadeshia: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 266-70.
3. R. Nandan, T.J. Lienert, and T. DebRoy: Int. J. Mater. Res., 2008, vol. 99, pp. 434-44.
4. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy: Acta Mater., 2007, vol. 55, pp. 883-95.
5. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 526-37.
6. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: "Friction Stir Butt Welding", International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8, Dec. 1991; U.S. Patent Application No. 5460317, Oct. 1995.
7. G. Buffa, J. Hua, and R. Shivpuri: Mater. Sci. Eng. A, 2006, vol. 419, pp. 381-88.
8. H. Fujii, L. Cui, and M. Maeda: Mater. Sci. Eng. A, 2006, vol. 419, pp. 25-31.
9. K. Kumar and S.V. Kailas: Mater. Sci. Eng. A, 2008, vol. 485, pp. 367-74.
10. Y.H. Zhao, S.B. Lin, L. Wu, and F.X. Qu: Mater. Lett., 2005, vol. 59, pp. 2948-52.
11. Y.H. Zhao, S.B. Lin, F.X. Qu, and L. Wu: Mater. Sci. Technol., 2006, vol. 22, pp. 45-50.
12. D.G. Hattingh, C. Bignaut, T.I Van Niekerk, and M.N. James: J. Mater. Process. Technol, 2008, vol. 203, pp. 46-57.
13. W.M. Thomas, K.I. Johnson, and C.S. Wiesner: Adv. Eng. Mater., 2003, vol. 5, pp. 485-90.
14. W.M. Thomas: Mater. Sci. Forum, 2003, vols. 426-432, pp. 229-36.
15. P.A. Colegrove and H.R. Shercliff: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 345-51.
16. P.A. Colegrove and H.R. Shercliff: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 352-61.
17. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980-1023.
18. Z. Zhang, Y.L. Liu, and J.T. Chen: Int. J. Adv. Manuf. Technol., 2009, vol. 45, pp. 889-95.
19. A. Scialpi, L.A.C. De Filippis, and P. Cavaliere: Mater. Des, 2007, vol. 28, pp. 1124-29.
20. R.M. Leal, C. Leitao, A. Loureiro, D.M. Rodrigues, and P. Vilaca: Mater. Sci. Eng. A, 2008, vol. 498, pp. 384-91.
21. K. Elangovan and V. Balasubramanian: Mater. Des., 2008, vol. 29, pp. 362-73.
22. A. Arora, A. De, and T. DebRoy: Scripta Mater., 2011, vol. 64, pp. 9-12.
23. R. Nandan, G.G. Roy, and T. DebRoy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1247-59.
24. R. Nandan, B. Prabu, A. De, and T. DebRoy: Weld. J., 2007, vol. 86, pp. 313s-322s.
25. A. Arora, R. Nandan, A. P. Reynolds, and T. DebRoy: Scripta Mater., 2009, vol. 60, pp. 13-16.
26. A. Arora, Z. Zhang, A. De, and T. DebRoy: Scripta Mater., 2009, vol. 61, pp. 863-66.
27. Q. Li and M. Lovell: J. Mater. Process. Technol., 2005, vol. 160, pp. 245-56.
28. P.A. Colegrove and H.R. Shercliff: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 429-41.
29. P.A. Colegrove, H.R. Shercliff, and R. Zetter: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 284-97.
30. M.W. Mahoney, C.G. Rodes, J.G. Flintoff, R.A. Spurling, and W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955-64.
31. E.J. Hearn: Mechanics of Materials 1, 3rd ed., Butterworth Heinemann, Oxford, United Kingdom, 1997, pp. 179-81.
32. J. Woolman and R.A. Mottram: The Mechanical and Physical Properties of the British Standard En Steels (B.S. 970-1955), Pergamon, New York, NY, 1964, vol. 2, p. 107.