Structure characterisation and mechanical properties of crystalline alumina coatings on stainless steel fabricated via sol-gel technology and fibre laser processing

Journal of the European Ceramic Society

Volumn 32, Issue 16, 2012, Pages 4229-4240

  Adraider, Y ^a   Hodgson, S N B ^a   Sharp, M C ^b   Zhang, Z Y ^c   Nabhani, F ^a   Al Waidh, A ^b   Pang, Y X ^a  

^a TEESSIDE UNIVERSITY   (United Kingdom)

^b LIVERPOOL JOHN MOORES UNIVERSITY   (United Kingdom)

^c UNIVERSITY OF PORTSMOUTH   (United Kingdom)

Author keywords

Alumina coatings; Fibre laser; Sol gel technology; Stainless steel; Surface hardness and modulus

Indexed keywords

ALUMINA CERAMIC; ALUMINA COATING; ALUMINA XEROGELS; ATR FTIR; COATED SUBSTRATES; COATED SURFACE; CONTINUOUS WAVE MODES; DIP COATING; IRRADIATION CONDITIONS; LASER PROCESS; MODIFIED SURFACES; SOL-GEL COATINGS; SOL-GEL ROUTES; SOL-GEL TECHNOLOGY; SPECIFIC ENERGY; STAINLESS STEEL SUBSTRATES; SURFACE HARDNESS; XRD; YOUNG'S MODULUS;

ALUMINA; ALUMINUM; CERAMIC COATINGS; CONTACT ANGLE; CRYSTALLINE MATERIALS; FIBER LASERS; MECHANICAL PROPERTIES; SOL-GEL PROCESS; SOL-GELS; STAINLESS STEEL; XEROGELS; YTTERBIUM;

ALUMINUM COATINGS;

EID: 84866762473     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2012.07.012     Document Type: Article

References (32)

1. Wilson S., Hawthorne H.M., Yang Q., Troczynski T. Sliding and abrasive wear of composite sol-gel alumina coated Al alloys. Surf Coat Technol 2000, 133-134:389-396.
2. Raj V., Ali M.M. Formation of ceramic alumina nanocomposite coatings on aluminium for enhanced corrosion resistance. J Mater Process Technol 2009, 209:5341-5352.
3. Jing C., Zhao X., Zhang Y. Sol-gel fabrication of compact, crack-free alumina film. Mater Res Bull 2007, 42:600-608.
4. Vasconcelos D.C.L., Orefice R.L., Vasconcelos W.L. Processing adhesion and electrical properties of silicon steel having non-oriented grains coated with silica and alumina sol-gel. Mater Sci Eng 2007, 447:77-82.
5. Raveh A., Tsameret Z.K., Grossman E. Surface characterization of thin layers of aluminium oxide. Surf Coat Technol 1996, 88:103-111.
6. 3 to electrolytes on alumina coatings by plasma electrolytic oxidation. Surf Coat Technol 2011, 205:3677-3682.
7. Wang J., Binner J., Pang Y., Vaidhyanathan B. Microwave-enhanced densification of sol-gel alumina films. Thin Solid Films 2008, 516:5998-6001.
8. 2 laser-induced crystallization of sol-gel-derived indium tin oxide films. Appl Phys 2009, 96:741-749.
9. Asakuma N., Fukui T., Toki M., Imai H. Low-temperature synthesis of ITO thin films using an ultraviolet laser for conductive coating on organic polymer substrates. J Sol-Gel Sci Technol 2003, 27:91-95.
10. 2: Sb sol-gel films using excimer laser annealing. Appl Surf Sci 2003, 208-209:382-387.
11. Winfield R.J., Koh L.H.K., O'Brien S., Crean G.M. Excimer laser processing of ZnO thin films prepared by the sol-gel process. Appl Surf Sci 2007, 254:855-858.
12. 2 thin films. J Optoelecton Adv Mater 2005, 7:2601-2606.
13. López A.J., Ureña A., Rams J. Laser densification of sol-gel silica coatings on aluminium matrix composites for corrosion and hardness improvement. Surf Coat Technol 2009, 203:1474-1480.
14. 3 ceramic coating on Mg alloy. Appl Surf Sci 2007, 253:5306-5311.
15. Wu Y., Du J., Choy K-L., Hench L.L. Laser densification of alumina powder beds generated using aerosol assisted spray deposition. J Eur Ceram Soc 2007, 27:4727-4735.
16. Harimkar S.P., Dahotre N.B. Characterization of microstructure in laser surface modified alumina ceramic. Mater Charact 2008, 59:700-707.
17. Adraider Y., Pang Y.X., Nabhani F., Hodgson S.N., Zhang Z.Y. Laser-induced deposition of sol-gel alumina coating on stainless steel under wet condition. Surf Coat Technol 2011, 205:5345-5349.
18. Dhakal H.N., Zhang Z.Y., Richardson M.O.W. Nanoindentation behaviour of layered silicate reinforced unsaturated polyester nanocomposites. Polym Test 2006, 25:846-852.
19. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 1992, 7:1564-1583.
20. Persson P., Karlsson M., ÖHman L. Coordination of acetate to Al(III) in aqueous solution and at the water-aluminium hydroxide interface: a potentiometric and attenuated total reflectance FTIR study. Geochim Cosmochim Acta 1998, 62:3657-3668.
21. Pflitsch C., Viefhaus D., Bergmann U., Atakan B. Organometallic vapour deposition of crystalline aluminium oxide films on stainless steel substrates. Thin Solid Films 2007, 515:3653-3660.
22. Kureti S., Weisweiler W. A novel sol-gel method for the synthesis of γ-aluminium oxide: development of the sol-gel transformation and characterization of the xerogel. J Non-Cryst Solids 2002, 303:253-261.
23. Chandradass J., Kim M.H., Bae D.S. Influence of citric acid to aluminium nitrate molar ratio on the combustion synthesis of alumina-zirconia nanopowders. J Alloys Comp 2009, 470:L9-L12.
24. Cai S.C., Rashkeev S.N., Sokrates T., Pantelides S.T., Sohlberg K. Phase transformation mechanism between γ- and θ-alumina. Phys Rev B 2003, 67:4104-4113.
25. Marcinauskas L. Deposition of alumina coatings from nanopowders by plasma spraying. Mater Sci (MEDŽIAGOTYRA) 2010, 16:47-51.
26. Jing C.B., Zhao X.J., Zhang Y.H. Sol-gel fabrication of compact, crack-free alumina film. Mater Res Bull 2007, 42:600-608.
27. Boccaccinia A.R., Kaya C. Alumina ceramics based on seeded boehmite and electrophoretic deposition. Ceram Int 2002, 28:893-897.
28. D'Alessandria M., Lasagni A., Mucklich F. Direct micro-patterning of aluminium substrates via laser interference metallurgy. Appl Surf Sci 2008, 255:3210-3216.
29. Saha R., Nix W.D. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Materialia 2002, 50:23-38.
30. Black J., Hastings G Handbook of biomaterial properties 1998, Chapman and Hall, London.
31. Kikuchi S., Nomura Y., Saito M. Stress analysis around DSCu/SS316 HIP bonded interface. Fusion Eng Des 2001, 56-57:385-389.
32. Picque B., Bouchard P.O., Montmitonnet P., Picard M. Mechanical behaviour of iron oxide scale: experimental and numerical study. Wear 2006, 260:231-242.