Biodegradable orthopedic magnesium-calcium (MgCa) alloys, processing, and corrosion performance

Materials

Volumn 5, Issue 1, 2012, Pages 135-155

  Salahshoor, Meisam ^a   Guo, Yuebin ^a  

^a University of Alabama   (United States)

Author keywords

Biomaterial; Corrosion; Implant; Magnesium; Manufacturing; Surface integrity

Indexed keywords

BONE IMPLANT; CORROSION PERFORMANCE; CRITICAL ISSUES; DEGRADATION RATE; ECONOMICAL IMPACT; HUMAN BODIES; IMPLANT MATERIALS; LOAD CARRYING; MANUFACTURING TECHNIQUES; METALLIC IMPLANTS; MICROSTRUCTURES AND MECHANICAL PROPERTIES; ORTHOPEDIC IMPLANT; STRESS SHIELDING; SURFACE INTEGRITY;

ALLOYS; BIOMATERIALS; BIOPOLYMERS; CALCIUM; CORROSION; DEGRADATION; IMPLANTS (SURGICAL); MAGNESIUM; MANUFACTURE; MECHANICAL PROPERTIES;

CALCIUM ALLOYS;

EID: 84864385043     PISSN: None     EISSN: 19961944     Source Type: Journal    
DOI: 10.3390/ma5010135     Document Type: Review

References (75)

1. Bergen, G.; Chen, L.H.; Warner, M.; Fingerhut, L.A. Injury in the United States: 2007 Chart Book; National Center for Health Statistics: Hyattsville, MD, USA, 2008.
2. Feser, K.; Kietzmann, M.; Baumer, W.; Krause, C.; Bach, F.W. Effects of degradable Mg-Ca alloys on dendritic cell function. J. Biomater. Appl. 2011, 25, 685-697.
3. Li, Z.; Gu, X.; Lou. S.; Zheng, Y. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. Biomaterials 2008, 29, 1329-1344.
4. Thomann, M.; Krause, C.; Bormann, D. von der Hoh, N, Windhagen, H. Meyer-Lindenberg, A. Comparison of the resorbable magnesium alloys LAE442 und MgCa0.8 concerning their mechanical properties, their progress of degradation and the bone-implant contact after 12 months implantation duration in a rabbit model. Materialwiss. Werkst. 2009, 40, 82-87
5. Thomann, M.; Krause, C.; Angrisani, N.; Bormann, D.; Hassel, T.; Windhagen, H.; Meyer-Lindenberg, A. Influence of a magnesium-fluoride coating of magnesium-based implants (MgCa0.8) on degradation in a rabbit model. J. Biomed. Mater. Rer. A 2010, 93, 1609-1619.
6. Von der Hoh, N.; Bormann, D.; Lucas, A.; Denkena, B.; Hackenbroich, C.; Meyer-Lindenberg, A. Influence of different machining treatments of magnesium-based resorbable implants on the degradation behavior in rabbits. Adv. Eng. Mater. 2009, 11, B47-B54.
7. Krause, A.; von der Hoh, N.; Bormann, D.; Krause, C.; Bach, F.W.; Windhagen, H.; Meyer-Lindenberg, A. Degradation behavior and mechanical properties of magnesium implants in rabbit tibiae. J. Mater. Sci. 2010, 45, 624-632.
8. Amelfarzad, H.; Peivandi, M.T.; Yusofsani, S.M.R. In body corrosion fatigue failure of a stainless steel orthopaedic implant with a rare collection of different damage mechanisms. Eng. Fail. Anal. 2007, 14, 1205-1217.
9. Triantafyllidis, G.K.; Kazantzis, A.V.; Karageorgiou, K.T.; Premature fracture of a stainless steel 316L orthopedic plate implant by alternative episodes of fatigue and cleavage decoherence. Eng. Fail. Anal. 2007, 14, 1346-1350.
10. Kanchanomai, C.; Phiphobmongkol, V.; Muanjan, P. Fatigue failure of an orthopedic implant-A locking compression plate. Eng. Fail. Anal. 2008, 15, 521-530.
11. Denkena, B.; Witte, F.; Podolsky, C.; Lucas, A. Degradable implants made of magnesium alloys. In Proceedings of the 5th Euspen International Conference, Montpellier, France, 9-12 May 2005.
12. Denkena, B.; Lucas, A. Biocompatible magnesium alloys as absorbable implant materials-Adjusted surface and subsurface properties by machining processes. Ann. CIRP 2007, 56, 113-116.
13. Benli, S.; Aksoy, S.; Havitcioglu, H.; Kucuk, M. Evaluation of bone plate with low stiffness material in terms of stress distribution. J. Biomech. 2008, 41, 3229-3235.
14. Completo, A.; Fonseca, F.; Simoes, J.A. Strain shielding in proximal tibia of stemmed knee prosthesis: Experimental study. J. Biomech. 2008, 41, 560-566.
15. Completo, A.; Fonseca, F.; Simoes, J.A. Experimental evaluation of strain shielding in distal femur in revision TKA. Exp. Mech. 2008, 48, 817-824.
16. Au, A.G.; Raso, V.J.; Liggins, A.B.; Amirfazli, A. Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements. J. Biomech. 2007, 40, 1410-1416.
17. Shi, J.F.; Wang, C.J.; Laoui, T.; Hart, W.; Hall, R. A Dynamic model of simulating stress distribution in the distal femur after total knee replacement. Proc. Inst. Mech. Eng. Part H 2007, 221, 903-912.
18. Isaksson, H.; Lerner, A.L. Mathematical modeling of stress shielding with bioresorbable materials for internal fracture fixation. In Proceedings of the IEEE 29th Annual Bioengineering Conference, Newark, NJ, USA, 22-23 March 2003; pp. 1041-1042.
19. Nagels, J.; Stokdijk, M.; Rozing, P.M. Stress shielding and bone resorption in shoulder arthroplasty. J. Should. Elb. Surg. 2003, 12, 35-39.
20. Wolff, J. The Law of Bone Remodeling; Springer-Verlag: Heidelberg, Germany, 1986.
21. Gefen, A. Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopaedic screws. Med. Biol. Eng. Comput. 2002, 40, 311-322.
22. Navarro, M.; Michiardi, A.; Castano, O.; Planell, J.A. Biomaterials in orthopaedic. J. R. Soc. Interface 2008, 5, 1137-1158.
23. Hench, L.; Polak, J. Third generation biomedical materials. Science 2002, 295, 1014-1017.
24. Seiler, H.G. Handbook on Toxicity of Inorganic Compounds, 1st ed.; CRC Press: Boca Raton, FL, USA, 1987.
25. Song, G. Control of biodegradation of biocompatible magnesium alloys. Corros. Sci. 2007, 49, 1696-1701.
26. Hassel, T.; Bach, F.W. Production and properties of small tubes made from mgca0.8 for application as stent in biomedical science. In Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, Kainer, K.U., Ed.; Wiley-VCH Verlag GmbH & Co.: Hoboken, NJ, USA, 2007; pp. 432-437.
27. Hassel, T.; Bach, F.W.; Krause, C. Influence of alloy composition on the mechanical and electrochemical properties of binary Mg-Ca alloys and its corrosion behavior in solutions at different chloride concentrations. In Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, Kainer, K.U., Ed.; Wiley-VCH Verlag GmbH & Co.: Hoboken, NJ, USA, 2007; pp. 789-795.
28. Kannan, M.B.; Raman, R.K.S. In vitro degradation and mechanical integrity of calcium containing magnesium alloys in modified simulated body fluid. Biomaterials 2008, 29, 2306-2314.
29. Kirkland, N.T.; Birbilis, N.; Walker, J.; Woodfield, T.; Dias, G.J.; Staiger, M.P. In vitro dissolution of magnesium-calcium binary alloys: Clarifying the unique role of calcium additions in bioresorbable magnesium implant alloys. J. Biomed. Mater. Res. B 2010, 95, 91-100.
30. Rad, H.R.B.; Idris, M.H.; Kadir, M.R.A.; Farahany, S. Microstructure analysis and corrosion behavior of biodegradable Mg-Ca implant alloys. Mater. Des. 2012, 33, 88-97.
31. Kainer, K.U.; Lach, E. Deformation behavior of AZ alloys at high strain rates. In Magnesium Alloys and Their Applications; Mordike, B.L., Kainer, K.U., Eds.; Werkstoff-Informationsgesellschaft: Frankfurt, Germany, 1998; pp. 369-374.
32. Drynda, A.; Hassel, T.; Hoehn, R.; Perz, A.; Bach, F.W.; Peuster, M. Development and biocompatibility of a novel corrodible fluoride-coated magnesium-calcium alloy with improved degradation kinetics and adequate mechanical properties for cardiovascular applications. J. Biomed. Mater. Res. A 2010, 93, 763-775.
33. El-Magd, E.; Abouridouane, M. Compression test on magnesium alloy mgal8zn at high strain rates and temperatures. In Magnesium Alloys and Their Applications; Kainer, K.U., Ed.; Wiley-VCH Verlag GmbH & Co.: Hoboken, NJ, USA, 2000; pp. 324-329.
34. El-Magd, E.; Abouridouane, M. Influence of strain rate and temperature on deformation and fracture behavior of magnesium alloy MgAl8Zn: tests and numerical simulations. In Proceedings of the 6th International Conference on Magnesium Alloys and Their Applications, Kainer, K.U., Ed.; Wiley-VCH Verlag GmbH & Co.: Hoboken, NJ, USA, 2004; pp. 402-408.
35. El-Magd, E.; Abouridouane, M. Characterization, modeling and simulation of deformation and fracture behavior of the light-weight wrought alloys under high strain rate loading. Int. J. Impact Eng. 2006, 32, 741-758.
36. Sealy, M.P.; Guo, Y.B. Surface integrity and process mechanics of laser shock peening of novel biodegradable magnesium-calcium (Mg-Ca) alloy. J. Mech. Behav. Biomed. 2010, 3, 488-496.
37. Guo, Y.B.; Salahshoor, M. Process mechanics and surface integrity by high-speed dry milling of biodegradable magnesium-calcium implant alloys. CIRP Ann. Manuf. Tech. 2010, 59, 151-154.
38. Salahshoor, M.; Guo, Y.B. Cutting mechanics in high speed dry machining of biomedical magnesium-calcium alloy using internal state variable plasticity model. Int. J. Mach. Tools Manuf. 2011, 51, 579-590.
39. El-Magd, E.; Abouridouane, M. Influence of strain rate and temperature on the compressive ductility of Al, Mg, Ti alloys. J. Phys. Paris 2003, 110, 15-20.
40. El-Magd, E.; Scholles, H.; Weisshaupt, H. Adiabatic flow curves of metallic materials at high strain rates. Mat. Wiss. U. Werkst. 1996, 27, 408-413.
41. Ataya, S.; El-Magd, E. Quasi-static behavior of Mg-alloys with and without short fiber reinforcement. Theor. Appl. Fract. Mech. 2007, 47, 102-112.
42. Essa, Y.E.; Perez-Castellanos, J.L. Effects of the strain rate and temperature on the mechanical behavior of a Mg-5%Zn alloy reinforced with SiC particles. J. Mater. Process. Tech. 2003, 143/144, 856-859.
43. Gu, X.N.; Zheng, W.; Cheng, Y.; Zheng, Y.F. A study on alkaline heat treated Mg-Ca alloy for the control of the biocorrosion rate. Acta Biomater. 2009, 5, 2790-2799.
44. Zhang, C.Y.; Zeng, R.C.; Liu, C.L.; Gao, J.C. Comparison of calcium phosphate coatings on Mg-Al and Mg-Ca alloys and their corrosion behavior in Hank's solution. Surf. Coat. Tech. 2010, 204, 3636-3640.
45. Li, M.; Chen, Q.; Zhang, W.; Hu, W.; Su, Y. Corrosion behavior in SBF for titania coatings on Mg-Ca alloy. J. Mater. Sci. 2011, 46, 2365-2369.
46. Wang, H.; Estrin, Y.; Zuberova, Z. Bio corrosion of a magnesium alloy with different processing histories. Mater. Lett. 2007, 62/16, 2476-2479.
47. Bach, F.W.; Denkena, B.; Weinert, K.; Alpers, P.; Bosse, M.; Hammer, N. Influence of cutting and non-cutting processes on the corrosion behavior and the mechanical properties of magnesium alloys. In Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, Dresden, Germany, 6-9 November 2007; pp. 1076-1084.
48. Bozdana, A.T.; Gindy, N.N.Z. Comparative experimental study on effects of conventional and ultrasonic deep cold rolling processes on Ti-6Al-4V. Mater. Sci. Tech. 2008, 24, 1378-1384.
49. Prevey, P.S.; Ravindranath, R.A.; Shepard, M.; Gabb, T. Case studies of fatigue life improvement using low plasticity burnishing in gas turbine engine applications. J. Eng. Gas Turb. Power 2006, 128, 865-872.
50. Seemikeri, C.Y.; Brahmankar, P.K.; Mahagaonkar, S.B. Low plasticity burnishing: An innovative manufacturing method for biomedical applications. J. Manuf. Sci. Eng. 2008, 130/2, 021008:1-021008:8.
51. Prevey, P.; McNulty, D.; Carr, J.; Sade, P.; Craft, A. Fatigue strength enhancement of Ti-6Al-4V ELI femoral distal stems using low plasticity burnishing. In Proceedings of the ASM MPMD (Materials & Processes for Medical Devices) Conference and Expo, Minneapolis, MN, USA, 10-12 August 2009.
52. Disegi, J.A.; Sax, C. Effect of low plasticity burnishing on the fatigue strength of spinal rods. In Proceedings of the ASM MPMD (Materials & Processes for Medical Devices) Conference and Expo, Minneapolis, MN, USA, 10-12 August 2009.
53. Schuh, A.; Zeller, C.; Holzwarth, U.; Kachler, W.; Wilcke, G.; Zeiler, G.; Eigenmann, B.; Bigoney, J. Deep rolling of titanium rods for application in modular total hip arthroplasty. J. Biomed. Mater. Res. B 2007, 81, 330-335.
54. Prevey, P.S.; Hornbach, D.J.; Jayaraman, N. Controlled plasticity burnishing to improve the performance of friction stir processed Ni-Al bronze. Mater. Sci. Forum 2007, 539, 3807-3813.
55. Gill, C.M.; Fox, N.; Withers, P.J. Shakedown of deep cold rolling residual stresses in titanium alloys. J. Phys. D 2008, 41, 174005:1-174005:5.
56. Tsuji, N.; Tanaka, S.; Takasugi, T. Evaluation of surface-modified Ti-6Al-4V alloy by combination of plasma-carburizing and deep rolling. Mater. Sci. Eng. A 2008, 488, 139-145.
57. Tsuji, N.; Tanaka, S.; Takasugi, T. Effect of combined plasma-carburizing and deep rolling on notch fatigue property of Ti-6Al-4V alloy. Mater. Sci. Eng. A 2009, 499, 482-488.
58. Nikitin, I.; Besel, M. Correlation between residual stress and plastic strain amplitude during low cycle fatigue of mechanically surface treated austenitic stainless steel AISI 304 and ferritic-pearlitic steel SAE 1045. Mater. Sci. Eng. A 2008, 491, 297-303.
59. Nikitin, I.; Besel, M. Residual stress relaxation of deep-rolled austenitic steel. Scr. Mater. 2008, 58, 239-242.
60. oC. Mater. Sci. Eng. A 2007, 465, 176-182.
61. Juijerm, P.; Altenberger, I. Effective boundary of deep rolling treatment and its correlation with residual stress stability of Al-Mg-Mn and Al-Mg-Si-Cu alloys. Scr. Mater. 2007, 56, 745-748.
62. Jayaraman, N.; Hornbach, D.J.; Prevey, P.S. Mitigation of fatigue and pre-cracking damage in aircraft structures through low plasticity burnishing. In Proceedings of the USAF Aircraft Structural Integrity Program (ASIP), Palm Springs, CA, USA, 4-6 December 2007.
63. Scheel, J.E.; Hornbach, D.J.; Prevey, P.S. Safe life conversion of aircraft aluminum structures via low plasticity burnishing for mitigation of corrosion related failures. In Proceedings of the Preliminary Program for 2009 DoD Corrosion Conference, Washington, DC, USA, 10-14 August 2009.
64. Lopez, L.N., Lamikiz, A., Sanchez, J.A., Arana, J.L. The effect of ball burnishing in heat treated steel and inconel 718 milled surfaces. Int. J. Adv. Manuf. Tech. 2007, 32, 958-968.
65. Seemikeri, C.Y.; Brahmankar, P.K.; Mahagaonkar, S.B. Investigations on surface integrity of AISI 1045 using LPB tool. Tribol. Int. 2008, 41, 724-734.
66. Rao, D.S.; Hebbar, H.S.; Komaraiah, M.; Kempaiah, U.N. Investigation on the effect of ball burnishing parameters on surface hardness and wear resistance of HSLA dual-phase steels. Mater. Manuf. Process. 2008, 23, 295-302.
67. Pourbaix, M. Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed.; Natl Assn of Corrosion: Houston, TX, USA, 1974.
68. Witte, F.; Kaese, V.; Haferkamp, H.; Switzer, E.; Meyer-Lindenberg, A.; Wirth, C.J.; Windhagen, H. In vivo corrosion of four magnesium alloys and the associated bone response. Biomaterials 2005, 26, 3557-3563.
69. Staiger, M.P.; Pietak, A.M.; Huadmai, J.; Dias, G. Magnesium and its alloys as orthopedic biomaterials: A review. Biomaterials 2006, 27, 1728-1734.
70. Miller, D.L.; Goswami, T. A review of locking compression plate biomechanics and their advantages as internal fixators in fracture healing. Clin. Biomech. 2007, 22, 1049-1062.
71. Tönshoff, H.K.; Friemuth, T.; Winkler, J.; Podolsky, C. Improving the characteristics of magnesium workpieces by burnishing operations. In Magnesium Alloys and Their Applications; Wiely-VCH: Hoboken, NJ, USA, 2000; pp. 406-411.
72. Roseler, B.; Schiller, C.A. Current-potential correlated noise measurement (CorrELNoise): A new technique for the evaluation of electrochemical noise analysis. Mater. Corros. 2001, 52, 413-417.
73. Witte, F.; Fischer, J.; Maier, P.; Blawert, C.; Stormer, M.; Hort, M. Magnesium-hydroxyapatite composites as an approach to degradable biomaterials. In Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, Kainer, K.U., Ed.; Wiley-VCH Verlag GmbH & Co.: Hoboken, NJ, USA, 2007; pp. 958-964.
74. Gu, X.N.; Zheng, Y.F.; Chen, L.J. Influence of artificial biological fluid composition on the biocorrosion of potential orthopedic Mg-Ca, AZ31, AZ91 alloys. Biomed. Mater. 2009, 4, 065011:1-065011:8.
75. Liu, C.L.; Wang, Y.J.; Zeng, R.C.; Zhang, X.M.; Huang, W.J.; Chu, P.K. In vitro corrosion degradation behavior of Mg-Ca alloy in the presence of albumin. Corros. Sci. 2010, 52, 3341-3347