Design and fabrication of custom-made dental implants

Journal of Mechanical Science and Technology

Volumn 26, Issue 7, 2012, Pages 1993-1998

  Chen, Xianshuai ^a,b   Xie, Longhan ^c   Chen, Jianyu ^d   Du, R ^a,b   Deng, Feilong ^d  

^a CHINESE UNIVERSITY OF HONG KONG   (Hong Kong)

^b INSTITUTE OF GEOLOGY AND GEOPHYSICS   (China)

^c SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^d SUN YAT SEN UNIVERSITY   (China)

Author keywords

Automated programming; Custom made; Dental implant; FEA; Immediate implantation; Machining

Indexed keywords

AUTOMATED PROGRAMMING; CUSTOM-MADE; IMPLANT-BONE INTERFACE; LIFE-TIMES; PC-BASED; TIGHT TOLERANCES;

FINITE ELEMENT METHOD; MACHINING; MACHINING CENTERS; STRESS CONCENTRATION; TITANIUM;

DENTAL PROSTHESES;

EID: 84864108065     PISSN: 1738494X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12206-012-0501-9     Document Type: Article

References (30)

1. J. Lee, V. Frias, K. Lee and R. F. Wright, Effect of implant size and shape on implant success rates: A literature review, The Journal of Prosthetic Dentistry, 4(4) (2004) 377-381.
2. P. P. Binon, Implants and components: Entering the new millennium, Int Journal of Oral Maxillofac Implants, 15 (2000) 76-94.
3. L. Zhou, Progress of dental implantology, West China Journal of Stomatology, 27(1) (2009) 8-12.
4. S. Eckert, S. Koka, G. Wplfinger and Y. G. Choi, Survey of implant experience by prosthodonists in the United States, J of Prosher Dent, 11 (2002) 194-201.
5. onemark system implants with early loading in edentulous mandibles, Int J Oral Maxillofac Implants, 23 (2008) 481-486.
6. I. Turkyilmaz, Influence of bone density on implant stability parameters and implant success: a retrospective clinical study, BMC Oral Health, 8 (2008) 32.
7. P. Branemark, R. Adell, U. Breine, B. Hansson, J. Lindstrom and A. Ohlsson, Intra-Osseous anchorage of dental prostheses. I. experimental studies, Scand J Plast Reconstr Surg, 3 (1969) 81-100.
8. R. Adell, B. Hansson, P. Branemark and U. Breine. Intra-Osseous anchorage of dental prostheses. ii. review of clinical approaches, Scand J Plast Reconstr Surg, 4 (1970) 19-34.
9. C. Misch, Conteporary implant dentistry. 2nd ed. St. Louis: Elsevier (1999) 54.
10. N. Broggini, L. Mcmanus and J. Hermann et al, Persistent acute inflammation at the implant-abutment interface, J Dent Res, 82(3) (2003) 232-237.
11. CT scan figure, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.
12. H. Martinez, M. Davarpanah, P. Missika, R. Celletti and R. Lazzara, Optimal implant stabilization in low density bone, Clin Oral Implants Res, 12 (2001) 423-432.
13. I. Miyamoto, Y. Tsuboi, E. Wada, H. Suwa and T. Iizuka, Influence of cortical bone thickness and implant length on implant stability at the time of surgery-clinical, Prospective, Biomechanical, and Imaging Study, 37 (2005) 776-780.
14. O. Dilek, E. Tezulas and M. Dincel, Required minimum primary stability and torque values for immediate loading of mini dental implants: an experimental study in nonviable bovine femoral bone, Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 105 (2008) 20-27.
15. L. Kong, Y. Sun, K. Hu, D. Li, R. Hou, J. Yang and B. Liu, Bivariate evaluation of cylinder implant diameter and length: a three-dimensional finite element analysis, J Prosthodont, 17 (2008) 286-293.
16. S. Ochi, H. Morris and S. Winkler, The influence of implant type, material, coating, diameter, and length on periotest values at second-stage surgery: DICRG interim report No. 4, Dental Implant Clinical Research Group. Implant Dent, 3 (1994) 159-162.
17. M. Esposito, J. Hirsch, U. Lekholm and P. Thomsen, Biological factors contributing to failures of osseointegrated oral implants (I): Success criteria and epidemiology, European Journal of Oral Sciences, 06(1) (1998) 527-51.
18. F. Marco, F. Milena, G. Gianluca and O. Vittoria, Peri-Implant osteogenesis in health and osteoporosis, Micron, 36(7-8) (2005) 630-44.
19. A. Jianhua, L. Tao, Y. Liu, Y. Ding, G. Wu, K. Hu and L. Kong, Optimal design of thread height and width on an immediately loaded cylinder implant: a finitr elemrnt analysis, Coputers in Biology and Medicine, 40 (2010) 681-686.
20. Y. B. An, N. H. Oh, Y. W. Chun, Y. H. Kim, D. K. Kim and J. S. Park, Mechanical properties of environmentalelectro-discharge-sintered porous Ti implants, Materials Letters, 59 (2005) 2178-2182.
21. M. C. Shaw, Metal cutting principle, Oxford Series on Advanced Manufacturing, London, England (2004).
22. Y. Sun, Y. Liang and R. Du, Experimental study of surface roughness in a micro-milling process, Proceedings of the 6th WSEAS International Conference on Robotics, Control and Manufacturing Technology, Hangzhou, China (2006) 30-35.
23. C. Ivanoff, L. Sennerby, C. Johansson, B. Rangert and U. Lekholm, Influence of implant diameters on the integration of screw implants. An experimental study in rabbits, Int J Oral Maxillofac Surg, 26 (1997) 141-8.
24. E. Holmgren, R. Seckinger, L. Kilgren and F. Mante, Evaluating parameters of osseointegrated dental implants using finite element analysis-a twodimensional comparative study examining the Effects of implant diameter, implant shape, and load direction, J Oral Implantol, 24 (1998) 80-8.
25. www. ipe. cuhk. edu. hk.
26. S. Hansson and M. Werke, The implant thread as a retention element in cortical bone: The effect of thread size and thread profile: a Finite element study, J Biomech, 36 (2003) 1247-58.
27. S. Lin, S. Shi, R. LeGeros and J. LeGeros, Three-dimensional finite element analyses of four designs of a high-strength silicon nitride implant, Implant Dent, 9 (2000) 53-60.
28. C. L. Chen, M. J. Jang and K. C. Lin, Modelling and high-precision control of a ball-screw-driven stage, Precision Engineering, 28 (2004) 483-495.
29. M. Iwasaki, H. Takei and N. Matsui, Gmdh-based modeling and feedforward compensation for nonlinear friction in table drive systems, IEEE Transactions on Industrial Electronics, 50(6) (2003) 1172-1178.
30. H. Bleuter, R. Clavel, J. M. Breguet, H. Langen and E. Pernette, Issues in precision motion control and microhandling, Proceedings of IEEE International Conference on Robotics and Automation (2000) 959-964.