Influence of Low-Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia

Journal of Prosthodontics

Volumn 21, Issue 5, 2012, Pages 363-369

  Alghazzawi, Tariq F ^a   Lemons, Jack ^b   Liu, Perng Ru ^b   Essig, Milton E ^b   Bartolucci, Alfred A ^b   Janowski, Gregg M ^b  

^a TAIBAH UNIVERSITY   (Saudi Arabia)

^b UNIVERSITY OF ALABAMA AT BIRMINGHAM   (United States)

Author keywords

Low temperature degradation; Transformation; Zirconia

Indexed keywords

DENTAL MATERIAL; SALIVA SUBSTITUTE; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; YTTRIUM; ZIRCONIUM;

ARTICLE; ATOMIC FORCE MICROSCOPY; CHEMISTRY; DENTAL PROCEDURE; HARDNESS; HEAT; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICS; PHASE TRANSITION; PLIABILITY; SCANNING ELECTRON MICROSCOPY; SPECTROMETRY; SURFACE PROPERTY; TEMPERATURE; THERMODYNAMICS; TOOTH PROSTHESIS; X RAY DIFFRACTION; YOUNG MODULUS;

DENTAL MATERIALS; DENTAL PROSTHESIS DESIGN; DENTAL STRESS ANALYSIS; ELASTIC MODULUS; HARDNESS; HOT TEMPERATURE; HUMANS; MATERIALS TESTING; MECHANICAL PHENOMENA; MICROSCOPY, ATOMIC FORCE; MICROSCOPY, ELECTRON, SCANNING; PHASE TRANSITION; PLIABILITY; SALIVA, ARTIFICIAL; SPECTROMETRY, X-RAY EMISSION; SURFACE PROPERTIES; TEMPERATURE; THERMODYNAMICS; X-RAY DIFFRACTION; YTTRIUM; ZIRCONIUM;

EID: 84863878945     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2011.00838.x     Document Type: Article

References (34)

1. Denry I, Kelly JR: State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
2. Piconi C, Maccauro G: Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
3. Denry IL, Holloway JA: Microstrucrural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res B: Appl Biomater 2006;76:440-448.
4. Kosmac T, Oblak C, Marion L: The effects of dental grinding and sandblasting on ageing and fatigue behavior of dental zirconia (Y-TZP) ceramics. J Eur Ceram Soc 2008;28:1085-1090.
5. Pittayachawan P, McDonald A, Petrie A, et al: The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic. Dent Mater 2007;23:1018-1029.
6. 3 solid electrolyte after ageing. Solid State Ion 1980;3:489-93.
7. Sato TS, Shimada M: Control of the tetragonal-to-monoclinic phase transformation of yttria partially stabilized zirconia in hot water. J Mater Sci 1985;20:3899-3992.
8. Deville S, Gremillard L, Chevalier J, et al: A critical comparison of methods for the determination of aging sensitivity in biomedical grade yttria-stabilized zirconia. J Biomed Mater Res Part B: Appl Biomater 2005;72:239-245.
9. Chevalier J: What future for zirconia as a biomaterial?. Biomaterials 2006;27:535-543.
10. Hernigou P, Bahrami T. Zirconia and alumina ceramics in comparison with stainless-steel heads. Polyethylene wear after a minimum ten-year follow-up. J Bone Joint Surg Br 2003;85:504-509.
11. Santos EM, Vohra S, Catledge SA, et al: Examination of surface and material properties of explanted zirconia femoral heads. J Arthroplast 2004;19(Suppl 2):30-34.
12. Catledge SA, Cook M, Vohra YK, et al: Surface crystalline phases and nanoindentation hardness of explanted zirconia femoral heads. J Mater Sci Mater Med 2003;14:863-867.
13. Fleming GJP, Jandu HS, Nolan L, et al: The influence of alumina abrasion and cement lute on the strength of a porcelain laminate veneering material. J Dent 2004;32:67-74.
14. Addison O, Fleming GJ, Marquis, PM: The effect of thermocycling on the strength of porcelain laminate veneer materials. Dent Mater 2003;19:291-297.
15. 3 nanocomposite and conventional Y-TZP. J Biomed Mater Res A 2003;67:200-207.
16. 3 nanocomposite and Y-TZP as dental restoratives. J Biomed Mater Res Part B: Appl Biomater 2008;87:492-498.
17. Guo X: On the degradation of zirconia ceramics during low-temperature annealing in water or water vapor. J Physics Chem Solids 1999;60:539-546.
18. Jevnikar P, Sersa I, Sepe A, et al: Effect of surface coating on water migration into resin-modified glass ionomer cements: a magnetic resonance micro-imaging study. Magn Reson Med 2000;44:686-691.
19. Kosmac T, Oblak C, Marion L: The effects of dental grinding and sandblasting on ageing and fatigue behavior of dental zirconia (Y-TZP) ceramics. J Eur Ceram Soc 2008;28:1085-1090.
20. Wang H, Aboushelib MN, Feilzer AJ: Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater 2008;24:633-638.
21. Papanagiotou HP, Morgano SM, Giordano RA, et al: In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics. J Prosthet Dent 2006;96:154-64.
22. BS EN ISO 4287: 2000 Geometrical product specification (GPS). Surface texture: profile method-terms, definitions and surface texture parameters.
23. Garvie RC, Nicholson PS: Phase analysis in zirconia systems. J Am Ceram Soc 1972;55:303-305.
24. International Standard ISO 6872: Dental Ceramics. International Organization for Standardization, Geneva, Switzerland, 2008.
25. Denry IL, Peacock JJ, Holloway JA: Effect of heat treatment after accelerated aging on phase transformation in 3Y-TZP. J Biomed Mater Res Part B: Appl Biomater 2010;93B:236-243.
26. Chowdhury S, Vohra YK, Lemons JE, et al: Accelerating aging of zirconia femoral head implants: change of surface structure and mechanical properties. J Biomed Mater Res Part B: Appl Biomater 2007;81B:486-492.
27. 3 materials at 250 °C. J Am Ceram Soc 1986;69:237-240.
28. Yoshimura M, Noma T, Kawabata K, et al: Role of water on the degradation process of Y-TZP. J Mater Sci Lett 1987;6:465-467.
29. Chevalier J, Gremillard L, Virkar AV, et al: The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends. J Am Ceram Soc 2009;92:1901-1920.
30. Curtis AR, Wright AJ, Fleming GJP: The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J Dent 2006;34:195-206.
31. Huang CW, Hsueh CH: Piston-on-three-ball versus piston-on-ring in evaluating the biaxial strength of dental ceramics. Dent Mater 2011;27:117-123.
32. Bollen C, Lambrechts P, Quirynen M: Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention. Dent Mater 1997;13:258-269.
33. Jones CS, Billington RW, Pearson GJ: The in vivo perception of roughness of restorations. Br Dent J 2004;196:42-45.
34. Ardlin BI: Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface texture. Dent Mater 2002;18:590-595.