Biotribological study of large diameter ceramic-on-CFR-PEEK hip joint including fluid uptake, wear and frictional heating

Journal of Materials Science: Materials in Medicine

Volumn 23, Issue 6, 2012, Pages 1533-1542

  Wang, Qian Qian ^a   Wu, Jun Jie ^a   Unsworth, Anthony ^a   Briscoe, Adam ^b   Jarman Smith, Marcus ^b   Lowry, Conor ^c   Simpson, David ^c   Collins, Simon ^c  

^a DURHAM UNIVERSITY   (United Kingdom)

^b INVIBIO LTD   (United Kingdom)

^c Corinium Centre ^*  (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ACETABULAR CUP; FEMORAL HEADS; FIBRE REINFORCED; FLUID UPTAKE; FRICTION FACTORS; FRICTIONAL HEAT; FRICTIONAL HEATING; HIP JOINTS; HIP SIMULATORS; IN-SITU; INCLINATION ANGLES; LARGE DIAMETER; NOVEL MATERIALS; ROOM TEMPERATURE; SOAK CONTROL; TEMPERATURE CHANGES; WEAR RATES;

ALUMINA; CARBON FIBERS; ETHERS; KETONES; ORGANIC COMPOUNDS; SURFACE ROUGHNESS; WEAR OF MATERIALS; ZIRCONIA;

FRICTION;

LUBRICATING AGENT;

ACETABULUM; ARTICLE; CERAMICS; CONTROLLED STUDY; FEMUR HEAD; FLUID TRANSPORT; FRICTION; HEATING; HIP; IN VITRO STUDY; MECHANICAL STRESS; PRIORITY JOURNAL; ROOM TEMPERATURE; SURFACE PROPERTY;

ABSORPTION; ALUMINUM OXIDE; BIOCOMPATIBLE MATERIALS; BIOMECHANICS; BODY FLUIDS; CARBON; CERAMICS; EQUIPMENT FAILURE ANALYSIS; FRICTION; HIP PROSTHESIS; HOT TEMPERATURE; HUMANS; KETONES; MICROSCOPY, ATOMIC FORCE; POLYETHYLENE GLYCOLS; PROSTHESIS FAILURE; SURFACE PROPERTIES; ZIRCONIUM;

EID: 84863334071     PISSN: 09574530     EISSN: 15734838     Source Type: Journal    
DOI: 10.1007/s10856-012-4617-3     Document Type: Article

References (24)

1. Clarke MT, Lee PTH, Arora A, Villar RN. Levels of metal ions after small- and large-diameter metal-on-metal hip arthroplasty. J Bone Joint Surg British Vol. 2003;85B(6):913-7. doi:10.1302/0301-620x.85b6.14166. (Pubitemid 36986860)
2. MacDonald SJ, Brodner W, Jacobs JJ. A consensus paper on metal ions in metal-on-metal hip arthroplasties. J Arthroplasty. 2004;19(8):12-6. doi:10.1016/j.arth.2004.09.009. (Pubitemid 39575821)
3. De Haan R, Pattyn C, Gill HS, Murray DW, Campbell PA, De Smet K. Correlation between inclination of the acetabular component and metal ion levels in metal-on-metal hip resurfacing replacement. J Bone Joint Surg British Vol. 2008;90B(10): 1291-7.
4. Grover M, Gandhe A. Head size, does it matter? Curr Orthop. 2008;22(3):155-64. doi:10.1016/j.cuor.2008.05.003.
5. Kurtz SM, Devine JN. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials. 2007;28(32):4845-69. doi: 10.1016/j.biomaterials.2007. 07.013. (Pubitemid 47285335)
6. Wang A, Lin R, Polineni VK, Essner A, Stark C, Dumbleton JH. Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement. Tribol Int. 1998;31(11): 661-7.
7. Scholes SC, Unsworth A. The wear properties of CFR-PEEKOPTIMA articulating against ceramic assessed on a multidirectional pin-on-plate machine. Proc Inst Mech Eng H. 2007;221(3): 281-9. (Pubitemid 46681869)
8. Scholes SC, Inman IA, Unsworth A, Jones E. Tribological assessment of a flexible carbon-fibre-reinforced poly(ether-etherketone) acetabular cup articulating against an alumina femoral head. Proc Inst Mech Eng H. 2008;222(3):273-83.
9. Chevalier J, De Aza AH, Fantozzi G, Schehl M, Torrecillas R. Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses. Biomaterials. 2002;23(3):937-45. (Pubitemid 33108971)
10. Chevalier J, Gremillard L. Ceramics for medical applications: a picture for the next 20 years. J Eur Ceram Soc. 2009;29(7): 1245-55. doi:10.1016/j.jeurceramsoc.2008.08.025.
11. Pria PD. Evolution and new application of the alumina ceramics in joint replacement. Eur J Orthop Surg Traumatol. 2007;17(3): 253-6. doi:10.1007/s00590-006-0181-1. (Pubitemid 350194100)
12. Al-Hajjar M, Leslie IJ, Tipper J, Williams S, Fisher J, Jennings LM. Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX (R) delta ceramic-on-ceramic total hip replacement. J Biomed Mater Res Part B Appl Biomater. 2010;95B(2):263-8. doi:10.1002/Jbm.B.31708.
13. Smith SL, Unsworth A. Simplified motion and loading compared to physiological motion and loading in a hip joint simulator. Proc Inst Mech Eng Part H J Eng Med. 2000;214(H3):233-8.
14. ISO Standard 14242-1:2002(E). Implants for surgery - wear of total hip-joint prostheses. Part 1: loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test. 1st ed. Switzerland: International Standardization Organization; 2002.
15. ISO Standard 14242-2:2000(E). Implants for surgery - wear of total hip-joint prostheses. Part 2: methods of measurement.1st ed. Switzerland: International Standardization Organization; 2000.
16. Scholes SC, Unsworth A. Comparison of friction and lubrication of different hip prostheses. Proc Inst Mech Eng Part H J Eng Med. 2000;214(H1):49-57. (Pubitemid 32508301)
17. Hart AJ, Buddhdev P, Winship P, Faria N, Powell JJ, Skinner JA. Cup inclination angle of greater than 50 degrees increases whole blood concentrations of cobalt and chromium ions after metal-onmetal hip resurfacing. Hip Int. 2008;18(3):212-9.
18. Nevelos JE, Ingham E, Doyle C, Nevelos AB, Fisher J. The influence of acetabular cup angle on the wear of "BIOLOX Forte" alumina ceramic bearing couples in a hip joint simulator. J Mater Sci Mater Med. 2001;12(2):141-4. (Pubitemid 32178864)
19. Smith SL, Unsworth A. A comparison between gravimetric and volumetric techniques of wear measurement of UHMWPE acetabular cups against zirconia and cobalt-chromium-molybdenum femoral heads in a hip simulator. Proc Inst Mech Eng Part H J Eng Med. 1999;213(6):475-83.
20. Barbour PSM, Stone MH, Fisher J. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates. Proc Inst Mech Eng Part H J Eng Med. 1999;213(H6):455-67.
21. Williams SR, Wu JJ, Unsworth A, Khan I. Tribological and surface analysis of 38 mm alumina-as-cast Co-Cr-Mo total hip arthroplasties. Proc Inst Mech Eng Part H J Eng Med. 2009;223(H8):941-54. doi:10.1243/09544119jeim590.
22. Williams SR, Wu JJ, Unsworth A, Khan I. Wear and surface analysis of 38 mm ceramic-on-metal total hip replacements under standard and severe wear testing conditions. Proc Inst Mech Eng Part H J Eng Med. 2011;225(H8):783-96. doi:10.1177/09544119 11404773.
23. Pritchett JW. Heat generated by hip resurfacing prostheses: an in vivo pilot study. J Long Term Effects of Med Implants. 2011; 21(1):55-62.
24. Bergmann G, Graichen F, Rohlmann A, Verdonschot N, van Lenthe GH. Frictional heating of total hip implants. Part 1: measurements in patients. J Biomech. 2001;34(4):421-8. (Pubitemid 32215466)