Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 95 B, Issue 2, 2010, Pages 263-268

  Al Hajjar, Mazen ^a   Leslie, Ian J ^a   Tipper, Joanne ^a   Williams, Sophie ^a   Fisher, John ^a   Jennings, Louise M ^a  

^a UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

ceramic on ceramic; hip replacement; inclination angle; microseparation; wear

Indexed keywords

CERAMIC ON CERAMIC; HIP REPLACEMENTS; INCLINATION ANGLE; MICRO-SEPARATION; WEAR;

BEARINGS (STRUCTURAL); HIP PROSTHESES; NONMETALLIC BEARINGS; STANDARDS; WEAR OF MATERIALS;

CERAMIC MATERIALS;

ALUMINUM OXIDE;

ARTICLE; CERAMICS; FEMUR HEAD; MEASUREMENT; SEPARATION TECHNIQUE; SIMULATOR; TOTAL HIP PROSTHESIS;

ARTHROPLASTY, REPLACEMENT, HIP; CERAMICS; FLUOROSCOPY; MATERIALS TESTING; MODELS, THEORETICAL; SURFACE PROPERTIES;

EID: 78649658341     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31708     Document Type: Article

References (28)

1. Willert HG,. Reactions of the articular capsule to wear products of artificial joint prostheses. J Biomed Mater Res 1977; 11: 157-164.
2. Hasegawa M, Sudo A, Hirata H, Uchida A,. Ceramic acetabular liner fracture in total hip arthroplasty with a ceramic sandwich cup. The J Arthroplasty 2003; 18: 658-661.
3. Park Y-S, Hwang S-K, Choy W-S, Kim Y-S, Moon Y-W, Lim S-J,. Ceramic failure after total hip arthroplasty with an alumina-on-alumina bearing. J Bone Joint Surg Am 2006; 88: 780-787.
4. Kuntz M, Schneider N, Heros R,. Controlled Zirconia Phase Transformation in Biolox Delta-A Feature of Safety. Ceramics in Orthopeadics: Steinkopff; 2006. pp 79-83.
5. Tipper JL, Firkins PJ, Besong AA, Barbour PSM, Nevelos J, Stone MH, Ingham E, Fisher J,. Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator. Wear 2001; 250: 120-128.
6. Fisher J, Jin Z, Tipper J, Stone M, Ingham E,. Tribology of alternative bearings. Clin Orthop Relat Res 2006; 453: 25-34.
7. Essner A, Sutton K, Wang A,. Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings. Wear 2005; 259: 992-995.
8. Refior HJ, Plitz W, Walter A,. Ex vivo and in vitro analysis of the alumina/alumina bearing system for hip joint prostheses. Bioceramics 1997; 10: 127-130.
9. Stewart T, Tipper J, Streicher R, Ingham E, Fisher J,. Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions. J Mater Sci Mater Med 2001; 12 (10-12): 1053-1056.
10. Nevelos JE, Ingham E, Doyle C, Nevelos AB, Fisher J,. Wear of HIPed and non-HIPed alumina-alumina hip joints under standard and severe simulator testing conditions. Biomaterials 2001; 22: 2191-2197.
11. Nevelos JE, Ingham E, Doyle C, Nevelos AB, Fisher J,. The influence of acetabular cup angle on the wear of "BIOLOX Forte" alumina ceramic bearing couples in a hip joint simulator. J Mater Sci Mater Med 2001; 12: 141-144.
12. Nevelos JE, Ingham E, Doyle C, Fisher J, Nevelos AB,. Analysis of retrieved alumina ceramic components from Mittelmeier total hip prostheses. Biomaterials 1999; 20: 1833-1840.
13. Nevelos J, Ingham E, Doyle C, Streicher R, Nevelos A, Walter W, Fisher J,. Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns. J Arthroplasty 2000; 15: 793-795.
14. Walter WL, Insley GM, Walter WK, Tuke MA,. Edge loading in third generation alumina ceramic-on-ceramic bearings: Stripe wear. J Arthroplasty 2004; 19: 402-413.
15. Manaka M, Clarke IC, Yamamoto K, Shishido T, Gustafson A, Imakiire A,. Stripe wear rates in alumina THR-Comparison of microseparation simulator study with retrieved implants. J Biomed Mater Res Part B-Appl Biomater B 2004; 69: 149-157.
16. Affatato S, Bersaglia G, Foltran I, Emiliani D, Traina F, Toni A,. The influence of implant position on the wear of alumina-on-alumina studied in a hip simulator. Wear 2004; 256: 400-405.
17. Dennis DA, Komistek RD, Northcut EJ, Ochoa JA, Ritchie A,. "In vivo" determination of hip joint separation and the forces generated due to impact loading conditions. J Biomechan 2001; 34: 623-629.
18. Glaser D, Komistek RD, Cates HE, Mahfouz MR,. Clicking and squeaking: In vivo correlation of sound and separation for different bearing surfaces. J Bone Joint Surg Am 2008; 90 (Suppl 4): 112-120.
19. Stewart TD, Tipper JL, Insley G, Streicher RM, Ingham E, Fisher J,. Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation. J Biomed Mater Res B Appl Biomater 2003; 66: 567-573.
20. Clarke IC, Pezzotti G, Green DD, Shirasu H, Donaldson T,. Severe Simulation Test for Run-in Wear of All-Alumina Compared to Alumina Composite. THR Bioceramics and Alternative Bearings in Joint Arthroplasty: Steinkopff; 2006. pp 11-20.
21. Pria PD,. Evolution and new application of the alumina ceramics in joint replacement. Eur J Orthopaedic Surg Traumatol 2007; 17: 253-256.
22. Smith SL, Unsworth A,. A comparison between gravimetric and volumetric techniques of wear measurement of UHMWPE acetabular cups against zirconia and cobalt-chromium-molybdenum femoral heads in a hip simulator. Proc Inst Mech Eng Part H-J Eng Med 1999; 213 (H6): 475-483.
23. Bigsby RJA, Hardaker CS, Fisher J,. Wear of ultra-high molecular weight polyethylene acetabular cups in a physiological hip joint simulator in the anatomical position using bovine serum as a lubricant. Proc Inst Mech Eng Part H-J Eng Med 1997; 211: 265-269.
24. Galvin AL, Tipper IL, Jennings LM, Stone MH, Jin ZM, Ingham E, Fisher J,. Wear and biological activity of highly crosslinked polyethylene in the hip under low serum protein concentrations. Proc Inst Mech Eng Part H-J Eng Med 2007; 221 (H1): 1-10.
25. Williams S, Jalali-Vahid D, Brockett C, Jin Z, Stone MH, Ingham E, Fisher J,. Effect of swing phase load on metal-on-metal hip lubrication, friction and wear. J Biomech 2006; 39: 2274-2281.
26. Liao Y, Hanes M,. The Relationship of Metal-on-Metal Wear and Metal Ion Release in the Serum Lubricant. Chicago: Orthopaedic Research Society; 2006. p 0506.
27. Bowsher JG, Hussain A, Williams P, Nevelos J, Shelton JC,. Effect of ion implantation on the tribology of metal-on-metal hip prostheses. J Arthroplasty 2004; 19 (Suppl 1): 107-111.
28. Leslie I, Williams S, Brown C, Isaac G, Jin ZM, Ingham E, Fisher J,. Effect of bearing size on the long-term wear, wear debris, and ion levels of large diameter metal-on-metal hip replacements-An in vitro study. J Biomed Mater Res Part B-Appl Biomater B 2008; 87: 163-172.