Acrylic bone cements for joint replacement

Biomedical Composites

Volumn , Issue , 2009, Pages 210-233

  Deb, Sanjukta ^a  

^a GUY S HOSPITAL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BONE CEMENT; ESTERS; JOINT PROSTHESES; TESTING;

ACRYLIC BONE CEMENTS; BONE RESORPTION; CLINICAL STUDY; COMPOSITE CEMENTS; JOINT REPLACEMENT; PHYSICAL AND MECHANICAL PROPERTIES; TEST METHOD;

CLINICAL RESEARCH;

EID: 84863310171     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845697372.2.210     Document Type: Chapter

References (79)

1. Ahmed A.M., Pak W., Burke D.L., Miller J. Transient and residual stress and displacement in self-curing bone cement. Part 1: characterization of relevant volumetric behaviour of bone cement. J Biomech Eng 1982, 104(1):21-27.
2. Arola D., Stoffel K.A., Yang D.T. Fatigue of the cement/bone interface: the surface texture of bone and loosening. J. Biomed Mater Res Part B: Appl Biomater 2006, 76:287-297.
3. Baker A.S., Greenham L.W. Release of gentamicin from acrylic bone cement. Elution and diffusion studies. J Bone Joint Surg 1988, 70:1551.
4. Bhambri S.K., Gilbertson L.N. Micromechanisms of fatigue crack initiation and propagation in bone cements. J Biomed Mater Res 1995, 29:233-237.
5. Vázquez Blanca, Deb Sanjukta, Bonfield William, San Román Julio Characterization of new acrylic bone cements prepared with oleic acid derivatives. J Biomed Mater Res Appl Biomater 2002, 63:88-97.
6. Brauer G.M., Davenport R.M., Hansen W.C. Accelerating effect of amines on polymerization of methyl methacrylate. Mod Plastics 1956, 34:153-256.
7. Chapiro A. Radiation chemistry of polymeric systems 1962, Wiley-Interscience, New York.
8. Charnley J. Anchorage of the femoral head prosthesis to the shaft of the femur. J Bone and Joint Surg 1960, 42B:28-30.
9. Cho S.B., Kim S.B., Cho K.J., Kim I.Y., Ohtsuki C., Kamitakahara M. In vitro aging test for bioactive PMMA-based bone cement using simulated body fluid. Key Eng Mater 2005, 284-286:153-156.
10. Dalby M.J., Di Silvio L., Harper E.J., Bonfield W. In vitro evaluation of a new polymethylmethacrylate cement reinforced with hydroxyapatite. J Mater Sci: Mater Med 1999, 10:793-796.
11. Deb S., Vazquez B. The effect of cross-linking agents on acrylic bone cements containing radiopacifiers. Biomaterials 2001, 22:2177-2181.
12. Deb S. A review of improvements in acrylic bone cements. J Biomater Appl 1999, 14:17-47.
13. Deb S., Abdulghani S., Behiri J.C. Radiopacity of bone cements using an organo-bismuth compound. Biomaterials 2002, 23:3387-3393.
14. Deb S., Doiron R., Di Silvio L., Punyani S., Singh H. PMMA bone cement containing a quaternary amine comonomer with potential antibacterial properties. J Biomedi Mater Res Part B: Appl Biomater 2008, 85(1):130-139.
15. Deb S. Orthopaedic bone cements 2008, Woodhead Publishing Limited, CRC Press.
16. Demian H.W., Mcdermott K. Regulatory perspective on characterization and testing of orthopaedic bone cements. Biomaterials 1998, 19:1607-1618.
17. Dunne N.J., Orr J.F., Mushipe M.T., Eveleigh R.J. The relationship between porosity and fatigue characteristics of bone cements. Biomaterials 2003, 24:239-245.
18. Funk M.J., Litsky A.S. Effect of cement modulus on the shear properties of the bone-cement interface. Biomaterials 1998, 19:1561-1567.
19. Ginebra M.P., et al. Improvement of the mechanical properties of acrylic bone cements by substitution of the radio-opaque agent. J Mater Sci: Mater Med 1999, 10:733-737.
20. Ginebra M.P., et al. Mechanical performance of acrylic bone cement containing different radiopacifying agents. Biomaterials 2002, 23:1873-1882.
21. Goto K., Tamura J., Shinzato S., Fujibayashi S., Hashimoto M., Kawashita M., Kokubo T., Nakamura T. Bioactive bone cements containing nano-sized titania particles for use as bone substitutes. Biomaterials 2005, 26(33):6496-6505.
22. Graham J., Pruitt L.A., Ries M.D., Gundiah N. Fracture and fatigue properties of acrylic bone cement: the effects of mixing method, sterilization treatment, and molecular weight. J Arthroplasty 2000, 15:1028-1035.
23. Harper E.J., et al. Influence of sterilization upon a range of properties of experimental bone cements. J Mater Sci Mater Med 1997, 8:849.
24. He Y., Trotignon J.P., Loty B., Tcharkhtchi A., Verdu J. Effect of antibiotics on the properties of poly(methylmethacrylate)-based bone cement. J Biomed Mater Res 2002, 63:800.
25. He S., Scott C., De Luise M., Edwards B., Higham P. Effect of choice of surgical gloves on dough time measurements of acrylic bone cement. Biomaterials 2003, 24:235-237.
26. He S., Scott C., Higham P. Mixing of acrylic bone cement: effect of oxygen on setting properties. Biomaterials 2003, 24:5045-5048.
27. Hoey D., Taylor D. Fatigue in porous PMMA: the effect of stress concentrations. Int J Fatigue 2008, 30:989-995.
28. Hoey D., Taylor D. Quantitative analysis of the effect of porosity on the fatigue strength of bone cement. Acta Biomater 2009, 5:719-726.
29. Hofmann A.A., et al. Treatment of infected total knee arthroplasty using an articulating spacer: 2- to 12-year experience. Clin Orthop Relat Res 2005, 430.
30. Hughes K.F., Ries M.D., Pruitt L.A. Structural degradation of acrylic bone cements due to in vivo and simulated aging. J Biomed Mater Res 2003, 65A:126-135.
31. James S.P., Jasty M., Davies J., Piehler H., Harris W.H. A fractographic investigation of PMMA bone cement focusing on the relationship between porosity reduction and increased fatigue life. J Biomed Mater Res 1992, 26:651.
32. Janssen D., Mann K.A., Verdonschot N. Micro-mechanical modeling of the cement-bone interface: the effect of friction, morphology and material properties on the micromechanical response. J Biomech 2008, 41:3158-3163.
33. Jasty M., O'Connor D.O., Maloney W.J., Bragdon C.R., Haire T., Harris W.H. The initiation of failure in cemented femoral components of hip arthroplasties. J Bone Joint Surg Br 1991, 73(4):551-558.
34. Kaufmann T.J., Trout A.T., Kallmes D.F. The effects of cement volume on the clinical outcomes of percutaneous vertebroplasty, Am. J Neuroradiol 2006, 27:1933-1937.
35. Kim S.B., Kim Y.J., Yoon T.L., Park S.A., Cho I.H., Kim E.J., Kim I.A., Shin J.-W. The characteristics of a hydroxyapatite-chitosan-PMMA bone cement. Biomaterials 2004, 25(26):5715-5723.
36. Koo K.-H., Yang J.W., Cho S.H., Song H.-R., Park H.-B., Ha Y.C., Chang J.D., Kim S.Y., Kim Y.H. Impregnation of vancomycin, gentamicin, and cefotaxime in a cement spacer for two-stage cementless reconstruction in infected total hip arthroplasty. J Arthroplasty 2001, 16:882.
37. Krause W.R., Grimes W.L., Mathis R.S. Fatigue properties of acrylic bone cements: S-N, P-N, and P-S-N data. J Biomed Mater Res: Appl Biomater 1988, 22:221-243.
38. Kuhn K.-D. Bone cements, up-to-date comparison of physical and chemical properties of commercial cements 2000, Springer-Verlag, Berlin/Heidelberg New York.
39. Langlais F., Belot N., Ropars M., Thomazeau H., Lambotte J.C., Cathelineau G. Antibiotic cements in articular prostheses: current orthopaedic concepts. Int J Antimicrob Agents 2006, 28:84-89.
40. Lautenschlager E.P., Jacobs J.J., Marshall G.W., Meyer JRP.R. Mechanical properties of bone cements containing large doses of antibiotic powders. J Biomed Mater Res 1976, 10:929-938.
41. Lautenschlager E.P., Stupp S.I., Keller J.C. Structure and properties of acrylic bond cement. Funct Behavior Orthop Biomater 1984, 2:87-119.
42. Leong JCY., et al. Vertebroplasty by use of a strontium-containing bioactive bone cement. Spine 2005, 30(Suppl. 17S):S84.
43. Lewis G. Composition and viscosity of acrylic bone cements. Biomed Mater Eng 2000, 10:1-11.
44. Lewis G. Fatigue testing and performance of acrylic bone-cement materials: state-of-the-art review. J. Biomed Mater Res Part B: Appl Biomater 2003, 66B:457-486.
45. Lewis G., Mladsi S. Effect of sterilization method on properties of Palacos R acrylic bone cement. Biomaterials 1998, 19(1-3):117-124.
46. Lewis G., Mladsi S. Relationship between fracture toughness and impact strength of acrylic bone cement. Crit Rev Biomed Eng 2000, 28:451-455.
47. Lewis G. Apparent fracture toughness of acrylic bone cement: effect of test specimen configuration and sterilization method. Biomaterials 1999, 20:69-78.
48. Lewis G. Effect of mixing method and storage temperature of cement constituents on the fatigue and porosity of acrylic bone cement. J Biomed Mater Res 1999, 48:143-149.
49. Lewis G. Properties of acrylic bone cement: state of the art review. J Biomed Mater Res (Appl Biomater) 1997, 38:155-182.
50. Li C., Wang Y., Mason J. The effects of curing history on residual stresses in bone cement during hip arthroplasty. J Biomed Mater Res Part B: Appl Biomater 2004, 70B:30-36.
51. lass. Mater Sci Eng: C 2008, 28(4):572-577.
52. Lopes P., Corbellini M., Ferreira B.L., Almeida N., Fredel M., Fernandes M.H., Correia R. New PMMA-co-EHA glass-filled composites for biomedical applications: mechanical properties and bioactivity. Acta Biomater 2009, 5(1):356-362.
53. Mann K.A., Ayers D.C., Werner F.W., Nicoletta R.J., Fortino M.D. Tensile strength of the cement-bone interface depends on the amount of bone interdigitated with PMMA cement. J Biomech 1997, 30:339-346.
54. Mann K.A., Miller M.A., Cleary R.J., Janssen D., Verdonschot N. Experimental micromechanics of the cement-bone interface. J Orthop Res 2008, 26:872-879.
55. Marrs B., Andrews R., Rantell T., Pienkowski D. Augmentation of acrylic bone cement with multiwall carbon nanotubes. J Biomed Mater Res 2006, 77A:269-276.
56. Mccormack B.A.O., Prendergast P.J., Gallagher D.J. An experimental study of damage accumulation in cemented hip prostheses. Clin Biomech 1996, 11(4):214-219.
57. Miyazaki T., Ohtsuki C. Orthopaedic bone cements. Design of bioactive bone cements based on organic-inorganic hybrids 2008, Woodhead Publishing, CRC Press. S. Deb (Ed.).
58. Mousa W.F., Kobayashi M., Kitamura Y., Zeineldin I.A., Nakamura T. Effect of silane treatment and different resin compositions on biological properties of bioactive bone cement containing apatite-wollastonite glass-ceramic powder. J Biomed Mater Res 1999, 47(3):336-344.
59. Murphy B.P., Prendergast P.J. On the magnitude and variability of the fatigue strength of bone cement. Int J Fatigue 2000, 22:855.
60. Murphy B.P., Prendergast P.J. The relationship between stress, porosity, and nonlinear damage accumulation in acrylic bone cement. J Biomed Mater Res 2002, 59:646-654.
61. Orr J.F., Dunne N.J., Quinn J.C. Shrinkage stresses in bone cement. Biomaterials 2003, 24:2933-2940.
62. Pelletier M.H., Malisano L., Smitham P.J., Okamoto K., Walsh W.R. The compressive properties of bone cements containing large doses of antibiotics. J Arthroplasty 2009, 24(3):454-460.
63. Pryor W.A. Free Radicals 1966, McGraw-Hill, New York.
64. Race A., Miller M.A., Ayers D.C., Cleary R.J., Mann K.A. The influence of surface roughness on stem-cement gaps. J Bone Joint Surg 2002, 84-B:1199-1204.
65. Rentería-zamarrón D., Cortés-hernández D.A., Bretado-aragón L., and Ortega-lara W. Mechanical properties and apatite-forming ability of PMMA bone cements, Mater Design. doi:10.1016/j.matdes.2008.11.024.
66. Ries M.D., Young E., Al-Marashi L., Goldstein P., Hetherington A., Petrie T., Pruitt L. In vivo behavior of acrylic bone cement in total hip arthroplasty. Biomaterials 2006, 27:256-261.
67. Rojo L., Borzacchiello A., Parra J., Deb S., Vázquez B., San Román J. The preparation of high conversion polymeric systems containing eugenol residues and their rheological characterization. J Mater Sci Mater Med 2008, 19(4):1467-1477.
68. Sabokbar A., Fujikawa Y., Murray D.W., Athanasou N.A. Radio-opaque agents in bone cement increase bone resorption. J Bone Joint Surg B 1997, 79:129-134.
69. Shinzato S., Kobayashi M., Mousa W.F., Kamimura M., Neo M., Kitamura Y., Kokubo T., Nakamura T. Bioactive polymethyl methacrylate-based bone cement: comparison of glass beads, apatite- and wollastonite-containing glass-ceramic, and hydroxyapatite fillers on mechanical and biological properties. J Biomed Mater Res 2000, 51(2):258-272.
70. Topoleski L.D., Ducheyne P., Cuckler J.M. Microstructural pathway of fracture in poly(methyl methacrylate) bone cement. Biomaterials 1993, 14(15):1165-1172.
71. Topoleski L.D., Ducheyne P., Cuckler J.M. A fractographic analysis of in vivo poly(methyl methacrylate) bone cement failure mechanisms. J Biomed Mater Res 1990, 24:135-154.
72. Vallo C.I. Influence of filler content on static properties of glass-reinforced bone cement. J Biomed Mater Res 2000, 53(6):717-727.
73. Vallo C.I., Montemartini P.E., Fanovich M.A., Porto López J.M., Cuadrado T.R. Polymethylmethacrylate-based bone cement modified with hydroxyapatite. J Biomed Mater Res 1999, 48(2):150-158.
74. Van De Belt H., Neut D., Uges D.R.A., Schenk W., Van Horn J.R., Van Der Mei H.C., Busscher H.J. Surface roughness, porosity and wettability of gentamicin-loaded bone cements and their antibiotic release. Biomaterials 2000, 21:1981-1987.
75. Vazquez B., Deb S., Bonfield W. Optimization of benzoyl peroxide concentration in an experimental bone cement based on poly(methyl methacrylate). J Mater Sci Mater Med 1997, 8:455.
76. Vila M.M., Ginebra M.P., Gil F.J., Planell J.A. Effect of porosity and environment on the mechanical behavior of acrylic bone cement modified with acrylonitrile-butadiene-styrene particles. I. Fracture toughness. J Biomed Mater Res 1999, 48:121-127.
77. Wong C.T., Chen Q.Z., Lu W.W., Leong J.C.Y., Chan W.K., Cheung K.M.C., Luk K.D.K. Ultrastructural study of mineralization of a strontium-containing hydroxyapatite (Sr-HA) cement in vivo. J Biomed Mater Res 2004, 70:428-435.
78. Wong C.T., et al. In vivo cancellous bone remodeling on a strontium-containing hydroxyapatite (Sr-HA) bioactive cement. J Biomed Mater Res A 2004, 68:513-521.
79. Zhao F., Lu W.W., Luk K.D.K., Cheung K.M.C., Wong C.T., Leong J.C.Y., et al. Surface treatment of injectable strontium-containing bioactive bone cement for vertebroplasty. J Biomed Mater Res Part B: Appl Biomater 2004, 69:79-86.