Preparation of a light color cardanol-based curing agent and epoxy resin composite: Cure-induced phase separation and its effect on properties

Progress in Organic Coatings

Volumn 74, Issue 1, 2012, Pages 240-247

  Huang, Kun ^a   Zhang, Yan ^a   Li, Mei ^a   Lian, Jianwei ^a   Yang, Xiaohua ^a   Xia, Jianling ^a  

^a RESEARCH INSTITUTE OF FORESTRY   (China)

Author keywords

Bio based polymer; Cardanol; Epoxy curing agent; Phase separation; Toughen

Indexed keywords

BIO-BASED POLYMERS; BUTYL ETHER; CARDANOLS; CURE BEHAVIOR; CURED EPOXY; CURING AGENTS; DECOMPOSITION MECHANISM; DIETHYLENETRIAMINE; DIFFERENTIAL SCANNING CALORIMETRIES (DSC); DIGLYCIDYL ETHER OF BISPHENOL-A; DISPERSED PHASE; EPOXY CURING AGENT; EPOXY MATRICES; EPOXY RESIN COMPOSITES; FTIR; LAP SHEAR STRENGTH; LIGHT COLOR; TOUGHEN; TWO STAGE; WEIGHT LOSS;

CURING; DECOMPOSITION; DIFFERENTIAL SCANNING CALORIMETRY; ETHERS; MECHANICAL PROPERTIES; MORPHOLOGY; PHASE SEPARATION; RESINS; THERMODYNAMIC PROPERTIES;

EPOXY RESINS;

EID: 84862803817     PISSN: 03009440     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.porgcoat.2011.12.015     Document Type: Article

References (24)

1. A. Devi, and D. Srivastava Studies on the blends of cardanol-based epoxidized novolac type phenolic resin and carboxyl-terminated polybutadiene (CTPB), I Mater. Sci. Eng. A 458 2007 336 347 (Pubitemid 46555042)
2. L.K. Aggarwal, P.C. Thapliyal, and S.R. Karade Anticorrosive properties of the epoxy-cardanol resin based paints Prog. Org. Coat. 59 2007 76 80 (Pubitemid 46528635)
3. M. Sultania, J.S.P. Rai, and D. Srivastava Process modeling, optimization and analysis of esterification reaction of cashew nut shell liquid (CNSL)-derived epoxy resin using response surface methodology J. Hazard. Mater. 185 2011 1198 1204
4. R. Ikeda, H. Tanaka, H. Uyama, and S. Kobayashi Synthesis and curing behaviors of a crosslinkable polymer from cashew nut shell liquid Polymer 43 2002 3475 3481 (Pubitemid 34453517)
5. C.W.F. Cheng, D., Bender, H.T. Wang, Phenalkamine curing agents and epoxy resin composites containing the same, US Patent 6262148 (2001).
6. S.K. Pathak, and B.S. Rao Structural effect of phenalkamines on adhesive viscoelastic and thermal properties of epoxy networks J. Appl. Polym. Sci. 102 2006 4741 4748 (Pubitemid 44784135)
7. B.S. Rao, and S.K. Pathak Thermal and viscoelastic properties of sequentially polymerized networks composed of benzoxazine, epoxy, and phenalkamine curing agents J. Appl. Polym. Sci. 100 2006 3956 3965 (Pubitemid 43666793)
8. K. Huang, J. Xia, X. Yang, M. Li, and H. Ding Properties and curing kinetics of c21-based reactive polyamides as epoxy curing agents derived from tung oil Polym. J. 42 2010 51 57
9. T. Fu, G. Zhang, S. Zhong, C. Zhao, K. Shao, L. Wang, and H. Na Reaction kinetics, thermal properties of tetramethyl biphenyl epoxy resin cured with aromatic diamine J. Appl. Polym. Sci. 105 2007 2611 2620 (Pubitemid 47168945)
10. D. Ratna Phase separation in liquid rubber modified epoxy mixture. Relationship between curing conditions, morphology and ultimate behavior Polymer 42 2001 4209 4218 (Pubitemid 32167574)
11. D. Verchere, H. Sautereau, J.P. Pascault, S.M. Moschair, C.C. Riccardi, and R.J.J. Williams Rheological properties of polypropylene/high-density polyethylene blend melts. I. Capillary flow properties J. Appl. Polym. Sci. 42 1991 467 471
12. S.M. Moschair, C.C. Riccardi, R.J.J. Williams, D. Verchere, H. Sautereau, and J.P. Pascault Rubber-modified epoxies. III. Analysis of experimental trends through a phase separation model J. Appl. Polym. Sci. 42 1991 717 735
13. A.M. Romano, F. Garbassi, and R. Braglia Rubber and thermoplastic- toughened epoxy adhesive films J. Appl. Polym. Sci. 52 1994 1775 1783
14. X.J. Zhang, X.S. Yi, and Y.Z. Xu Cure-induced phase separation of epoxy/DDS/PEK-C composites and its temperature dependency J. Appl. Polym. Sci. 109 2008 2195 2206
15. A. Bonnet, J.P. Pascault, H. Sautereau, and M. Taha Epoxy-diamine thermoset/thermoplastic blends. 1. Rates of reactions before and after phase separation Macromolecules 32 1999 8517 8523 (Pubitemid 30545629)
16. H.P. Bhuniaa, A. Basakb, T.K. Chakia, and G.B. Nando Synthesis and characterization of polymers from cashewnut shell liquid: a renewable resource. V. Synthesis of copolyester Eur. Polym. J. 36 2000 1157 1165
17. R.A. Pearson, and A.F. Yee Toughening mechanisms in elastomer-modified epoxies. Part 1: mechanical studies J. Mater. Sci. 21 1986 2475 2488 (Pubitemid 16603522)
18. R.A. Pearson, and A.F. Yee Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies J. Mater. Sci. 26 1991 3828 3844
19. X. Luo, S. Zheng, N. Zhang, and D. Ma Miscibility of epoxy resins/poly(ethylene oxide) blends cured with phthalic anhydride Polymer 35 1994 2619 2623
20. K. Yamanaka, and T. Inoue Phase separation mechanism of rubber-modified epoxy J. Mater. Sci. 25 1990 241 245 (Pubitemid 20637506)
21. J.H. Klug, and J.C. Seferis Phase separation influence on the performance of CTBN-toughened epoxy adhesives Polym. Eng. Sci. 39 1999 1837 1848 (Pubitemid 30524160)
22. S. Ritzenthaler, F. Court, E. Girard-Reydet, L. Leibler, and J.P. Pascault ABC triblock copolymers/epoxy-diamine blends. 2. Parameters controlling the morphologies and properties Macromolecules 36 2003 118 126
23. Z. Xu, and S. Zheng Reaction-induced microphase separation in epoxy thermosets containing poly(caprolactone)-block-poly(n-butyl acrylate) diblock copolymer Macromolecules 40 2007 2548 2558 (Pubitemid 46608283)
24. A.J. Kinloch, S.J. Shaw, and D.L. Hunston Deformation and fracture behaviour of a rubber-toughened epoxy: 2. Failure criteria Polymer 24 1983 1355 1363 (Pubitemid 14468879)