Effect of different surface treatments on roughness of IPS Empress 2 ceramic

Lasers in Medical Science

Volumn 27, Issue 2, 2012, Pages 267-272

  Kara, Haluk Baris ^a   Dilber, Erhan ^a   Koc, Ozlem ^a   Ozturk, A Nilgun ^a   Bulbul, Mehmet ^b  

^a SELCUK UNIVERSITY   (Turkey)

^b GAZIANTEP UNIVERSITY   (Turkey)

Author keywords

AFM; Ceramic; Laser; Roughness; Surface treatment

Indexed keywords

ALUMINUM OXIDE; GLASS; HYDROFLUORIC ACID; LITHIUM; SILICATE;

ACID ETCHING; AIR ABRASION; ANALYSIS OF VARIANCE; ARTICLE; ATOMIC FORCE MICROSCOPY; CERAMICS; ERBIUM YAG LASER; LASER; NEODYMIUM LASER; PHYSICAL CHEMISTRY; PRIORITY JOURNAL; PROCEDURES; PROFILOMETRY; RADIATION DOSE; SURFACE PROPERTY; SURFACE ROUGHNESS; SYNTHESIS; THICKNESS;

ACID ETCHING, DENTAL; AIR ABRASION, DENTAL; ALUMINUM SILICATES; DENTAL PORCELAIN; LASERS, SOLID-STATE; SHEAR STRENGTH; SURFACE PROPERTIES;

EID: 84862185105     PISSN: 02688921     EISSN: 1435604X     Source Type: Journal    
DOI: 10.1007/s10103-010-0860-3     Document Type: Article

References (33)

1. Özcan M, Nijhuis H, Valandro L (2008) Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater 27 (1): 99-104
2. Van Meerbeek B, DeMunck J, Yoshida Y, Inoue S, Vargas M, Vijay P, VanLanduyt K, Lambrechts P, Vanherle G (2003) Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 28: 215-235 (Pubitemid 37237447)
3. Kramer N, Lohbauer U, Frankenberger R (2000) Adhesive luting of indirect restorations. Am J Dent 13: 60D-70D
4. Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS (2006) Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 95: 430-436 (Pubitemid 43831079)
5. Borges GA, Sophr AM, deGoes MF, Correr L, Chan DCN (2003) Effect of etching and air borne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 89: 479-488 (Pubitemid 37304955)
6. Osorio E, Toledano M, Silveira BL, Osorio R (2009) Effect of different surface treatments on In-Ceram Alumina roughness. An AFM study. J Dent 38: 118-122
7. Sorensen JA, Engelman MJ, Torres TJ, Avera SP (1991) Shear bond strength of composite resin to porcelain. Inter J Prosthodont 4: 17-23
8. Aida M, Hayakawa T, Mizukawa K (1995) Adhesion of composite to porcelain with various surface conditions. J Prosthet Dent 73: 464-470
9. Della Bona A, Anusavice KJ, Shen C (2000) Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2: 305-313
10. Blatz MB, Sadan A, Kern M (2003) Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89: 268-274 (Pubitemid 37304971)
11. Plueddemann EP (1970) Adhesion through silane coupling agents. J Adhes 2: 184-201
12. Bailey LF, Bennet RJ (1988) DICOR surface treatments for enhanced bonding. J Dent Res 67: 925-931
13. Wolf DM, Powers JM, O'Keefe KL (1992) Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater 8: 158-161
14. Chen JH, Matsumura H, Atsuta M (1998) Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent 26: 53-58 (Pubitemid 128394265)
15. Chen JH, Matsumura H, Atsuta M (1998) Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Oper Dent 23: 250-257 (Pubitemid 128686988)
16. Schmage P, Nergiz I, Herrmann W, Ozcan M (2003) Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces. Am J Orthod Dentofacial Orthop 123: 540-546 (Pubitemid 36880764)
17. El Feninat F, Elouatik S, Ellis TH, Sacher E, Stangel I (2001) Quantitative assessment of surface roughness as measured by AFM: application to polished human dentin. Appl Surf Sci 183: 205-215 (Pubitemid 33076706)
18. Semmelman JO, Kulp PR (1968) Silane bonding porcelain teeth to acrylic. J Am Dent Assoc 76: 69-73
19. Jochen DG, Caputo AA (1977) Composite resin repair of porcelain denture teeth. J Prosthet Dent 38: 673-679
20. Ferrando JM, Graser GN, Tallents RH, Jarvis RH (1983) Tensile strength and micro leakage of porcelain repair materials. J Prosthet Dent 50: 44-50
21. Gökçe B, Özpinar B, Dündar M, Çö mlekoglu E, Sen BH, Güngör MA (2007) Bond strengths of all-ceramics: acid vs laser etching. Oper Dent 32 (2): 173-178
22. De'rand P, De'rand T (2000) Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthod 13: 131-135
23. Li R, Ren Y, Han J (2000) Effects of pulsed Nd: YAG laser irradiation on shear bond strength of composite resin bonded to porcelain. Hua Xi Kou Qiang Yi Xue Za Zhi 18: 377-379
24. al Edris A, al Jabr A, Cooley RL, Barghi N (1990) SEM evaluation of etch patterns by three etchants on three porcelains. J Prosthet Dent 64: 734-739
25. Lacy AM, La Luz J, Watanabe LG, Dellinges M (1988) Effect of porcelain surface treatment on the bond to composite. J Prosthet Dent 60: 288-291
26. Shiu P, De Souza-Zaroni WC, de Eduardo CP, Youssef MN (2007) Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg 25: 291-296
27. Melo RM, Valandro LF, Bottino MA (2007) Micro tensile bond strength of a repair composite to leucite reinforced feldspathic ceramic. Braz Dent J 18: 314-319
28. Guler AU, Yilmaz F, Yenisey M, Guler E, Ural C (2006) Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain. J Adhes Dent 8: 21-25 (Pubitemid 43267068)
29. Guler AU, Yilmaz F, Ural C, Guler E (2005) Evaluation of 24- hour shear bond strength of resin composite to porcelain according to surface treatment. Int J Prosthodont 18: 156-160 (Pubitemid 40521840)
30. Akova T, Yoldas O, Toroglu MS, Uysal H (2005) Porcelain surface treatment by laser for bracket-porcelain bonding. J Orthod Dentofacial Orthop 128: 630-637 (Pubitemid 41616350)
31. Aky?l MS, Y?lmaz A, Karaalio?lu OF, Duymu? ZY (2010) Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface. Photomed Laser Surg 28: 539-545
32. Estafan D, Dussetschleger F, Estafan A, Jia W (2000) Effect of prebonding procedures on shear bond strength of resin composite to pressable ceramic. Gen Dent 48: 412-416
33. Keller U, Hibst R (1989) Experimental studies of the application of the Er:YAG laser on dental hard substances: light microscopic and SEM investigations. Lasers Surg Med 9: 345-351 (Pubitemid 19190406)