A technical framework and roadmap of embedded diagnostics and prognostics for complex mechanical systems in prognostics and health management Ssystems

IEEE Transactions on Reliability

Volumn 61, Issue 2, 2012, Pages 314-322

  Chen, Z S ^a   Yang, Y M ^a   Hu, Zheng ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

Complex mechanical systems; embedded diagnostics and prognostics; prognostics and health management

Indexed keywords

BUILT IN TESTS; COMPLEX MECHANICAL SYSTEM; ELECTRONIC SYSTEMS; ELECTRONICS TECHNOLOGY; EMBEDDED DIAGNOSTICS; EMBEDDED SENSING; EMBEDDED SENSORS; EMBEDDED SIGNALS; KEY ELEMENTS; MECHANICAL FAULTS; MECHANICAL STRUCTURES; MECHANICAL SYSTEMS; ON-LINE SENSOR; PARALLEL DESIGN; POTENTIAL SOLUTIONS; PREDICTIVE MAINTENANCE; PROGNOSTICS AND HEALTH MANAGEMENTS; REAL TIME; ROADMAP; S-SYSTEMS; SYSTEM FAULTS; SYSTEM INTEGRATION; TECHNICAL CHALLENGES; TECHNICAL FRAMEWORKS;

BOTTLES; ELECTRIC DRIVES; HEALTH; MECHANICAL ENGINEERING; SENSORS; SYSTEMS ENGINEERING;

MECHANICS;

EID: 84861907501     PISSN: 00189529     EISSN: None     Source Type: Journal    
DOI: 10.1109/TR.2012.2196171     Document Type: Article

References (48)

1. A. Hess and L. Fila, "The joint strike fighter (JSF) PHM concept: Potential impact on aging aircraft problems," in Proceedings of IEEE Aerospace Conference, 2002, pp. 3021-3026.
2. A. Hess, G. Calvello, and T. Dabney, "PHM a key enabler for the JSF autonomic logistics support concept," in Proceedings of IEEE Aerospace Conference, 2004, pp. 3543-3550.
3. G. Smith, J. B. Schroeder, S. Navarro, and D. Haldeman, "Development of a prognostics & health management capability for the joint strike fighter," in Proceedings of IEEE AUTOTESTCON, 1997, pp. 676-682.
4. E. Scanff, K. L. Feldman, S. Ghelam, P. Sandborn, M. Glade, and B. Foucher, "Life cycle cost impact of using prognostic health management (PHM) for helicopter avionics," Microelectronics Reliability, vol. 47, pp. 1857-1864, Dec. 2007. (Pubitemid 350027738)
5. W. B. Wang and M. Pecht, "Economic analysis of canary-based prognostics and health management," IEEE Trans. Industrial Electronics, vol. 58, pp. 3077-3089, Jul. 2011.
6. Kalgren, Patrick, B. Carl, R. Michael, and W. Matthew, "Defining PHM, A lexical evolution of maintenance and logistics," in Proceedings of IEEE AUTOTESTCON, 2006, pp. 353-358.
7. B. L. Ferrell, "JSF prognostics and health management," in Proceedings of IEEE Aerospace Conference, 1999, p. 471.
8. P. H. Barton, "Prognostics for combat systems of the future," IEEE Instrumentation & Measurement Magazine, vol. 10, pp. 10-14, Aug. 2007.
9. L. Christodoulou, "Prognosis," in Overview talk for DARPA Broad Agency Announcement Call 03-02, Bidders Conference andWorkshop, 2002.
10. J. Banks and K. Maynard, Prognostics and Health Management Pennsylvania State University's Applied Research Laboratory, Technical Report, Mar. 2001.
11. J. Gu, D. Barker, and M. G. Pecht, "Uncertainty assessment of prognostics of electronics subject to random vibration," in Proceedings of AAAI Fall Symposium on Artificial Intelligence for Prognostics, 2007, pp. 50-57.
12. J. Gu, N. Vichare, E. Tinsley, and M. G. Pecht, "Computer usage monitoring for design and reliability tests," IEEE Trans. Compon. Packag. Technol., vol. 32, pp. 550-556, Sep. 2009.
13. M. G. Pecht, "A prognostics and health management roadmap for information and electronics-rich systems," Fundamentals Review, vol. 3, pp. 25-32, Apr. 2010.
14. C. Byington, P. Kalgren, and B. Donovan, "Streamlined avionics PHM utilizing portable information and reasoning," in Proceedings of IEEE Aerospace Conference, 2005, pp. 3547-3554.
15. M. Lebold and M. Thurston, "Open standards for condition-based maintenance and prognostic systems," in Proceedings of Maintenance and Reliability Conference, 2001.
16. P. Bardell and W. Mcanney, "Built-in test for RAMs," IEEE Design Test Comput., vol. 5, pp. 29-36, Apr. 1988.
17. M. G. Pecht, M. Dube, and M. Natishan et al., "Evaluation of built-in test," IEEE Trans. Aerospace and Electronic Systems, vol. 37, pp. 266-272, Jan. 2001.
18. V. Polis and C. Army, "Vibration and usage monitoring system for the KAMAN SH-2G(A) helicopter," in Proceeding of DSTO International Conference on Health and Usage Monitoring, 2001, pp. 79-84.
19. G. Victor, C. Adrian, and G. Paulette, "Review of vibration-based helicopter health and usage monitoring methods," in Proceeding of 55th Meeting of the Society for Machinery Failure Prevention Technology, 2001.
20. D. D. Andrew and D. W. Kensall, "A wireless microsystem for the remote sensing of pressure, temperature, and relative humidity," Journal of Microelectromechanical Systems, vol. 14, pp. 12-22, Jan. 2005.
21. M. K. Leah and R. Russel, "Embedded diagnostics and prognostics synchronization for army transformation," in Proceedings of IEEE Aerospace Conference, 2004, pp. 3733-3741.
22. S. F. Cheng, H. A. Michael, and M. G. Pecht, "Sensor systems for prognostics and health management," Sensors, vol. 10, pp. 5774-5797, Jun. 2010.
23. T. H. Brian and X. G. Robert, "A smart bearing utilizing embedded sensors design considerations," SPIE, vol. 3041, pp. 602-610, Mar. 1997.
24. M. Lin and F. K. Chang, "Development of SMART Layers for built-in diagnostic for composite structures," in The 13th Annual ASC Technical Conference on Composite Materials, Baltimore, MD, 1998.
25. Embedded Diagnostic & Prognostic Health Management Modules
26. [Online]. Available: http://www.impact-Tek.com/Engineering
27. S. Deb, K. R. Pattipati, and R. Shrestha, "QSI's integrated diagnostics toolset," in Proceedings of IEEE AUTOTESTCON, 1997, pp. 408-421.
28. P. S. Laura, E. C. James, S. L. Kelly, and B. D. Adele, Algorithm Development for Prognostics and Health Management (PHM) Sandia National Laboratories, Technical Report (SAND2003-3820), Oct. 2003.
29. S. Cheng, K. Tom, L. Thomas, and M. G. Pecht, "A wireless sensor system for prognostics and health management," IEEE Sensors, vol. 10, pp. 856-862, 2010.
30. F. Belvoir, "DoD 5000.2 Policy Document: Performance based logistics," in In Defense Acquisition Guidebook, VA, USA, 2004, Chapter 5.3.
31. S. Kenneth, "Embedded sensors for measurement of material properties-needs direction, and technology," in Proceeding of 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2005, pp. 1-12.
32. G. F. Zhang, "OptimumSensor Localization/Selection in aDiagnostic/Prognostic Architecture," PhD thesis, Georgia Institute of Technology, , 2005.
33. R. F. Charles, P. Gyuhae, and D. Anthony et al., "Sensing and sensor optimization issues for structural health monitoring," in Proceeding of the 23rd Aerospace Testing Seminar, 2006.
34. G. Venter and S. J. Sobieszczanski, "Particle swarm optimization," American Institute of Aeronautics and Astronautics, vol. 43, pp. 1583-1589, Aug. 2003.
35. N. Mary and P. G. John, "Use of adaptive model-based reasoning for embedded diagnostics and redundancy management for fault tolerant systems," Proceedings of IEEE, pp. 455-466, 1997.
36. P. Glynne-Jones, M. J. Tudor, and S. P. Beeby et al., "An electromagnetic vibration-powered generator for intelligent sensor systems," Sensor and Actuators, vol. 110, pp. 344-349, Mar. 2004.
37. J. Hagerty, F. Helmbrecht, andW.McCalpin et al., "Recycling ambient microwave energy with broad-band rectenna arrays," IEEE Trans. on Microwave Theory and Techniques, vol. 52, pp. 1014-1024, Mar. 2004.
38. J. W. Stevens, "Optimized thermal design of small thermoelectric generators," presented at the Proceedings of 34th Intersociety Energy Conversion Engineering Conference, Society of Automotive Engineers, Vancouver, BC, 1999, 1999-01-2564, unpublished.
39. R. Vijay, K. Aman, and H. Jason et al., "Design considerations for solar energy harvesting wireless embedded systems," Proceedings of IEEE, pp. 457-462, 2005.
40. T. H. Brian and X. G. Robert, "Structural design and analysis for a sensor-integrated ball bearing," Finite Elements in Analysis and Design, vol. 34, pp. 257-270, Jan. 2000.
41. X. G. Robert and S. Abhijit, "Diagnosis from within the system," IEEE Instrumentation & Measurement Magazine, vol. 9, pp. 43-47, 2002.
42. The Product Specification of LIS3L02AL [Online]. Available: http://www.st.com
43. The Product Specification of nRF24E1 [Online]. Available: http://www.nvlsi.no
44. Y. M. Yang, Z. S. Chen, H. Liu, and Z. Hu, "Wireless embedded signals acquisition for mechanical systems," in Proceedings of IEEE International Conference on Networking, Sensing and Control, 2008, pp. 56-60.
45. Z. S. Chen, Y. M. Yang, C. Li, and J. F. Yin, "Model and algorithm of optimal embedded sensors placement for gearboxes based on signed directed graph of vibration propagation," Journal of Aerospace Power, vol. 24, pp. 2384-2390, Oct. 2009.
46. J. A. Paradiso and T. Starner, "Energy scavenging for mobile and wireless electronics," IEEE Pervasive Computing, vol. 4, pp. 18-27, Jan. 2005. (Pubitemid 40495602)
47. R. Torah and G. J. P. M. Tudor et al., "Self-powered autonomous wireless sensor node using vibration energy harvesting," Measurement Science and Technology, vol. 19, pp. 1-8, Dec. 2008.
48. S. Roundy, "On the effectiveness of vibration-based energy harvesting," Journal of Intelligent Material Systems and Structures, vol. 16, pp. 809-823, 2005. (Pubitemid 41498482)