Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions

Experiments in Fluids

Volumn 52, Issue 3, 2012, Pages 679-695

  Moita, A S ^a   Moreira, A L N ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

FUNDAMENTAL WAVELENGTH; GOOD CORRELATIONS; HEATED SURFACES; INTERFACIAL TRANSFER; MEAN SIZE; REALISTIC PHYSICAL MODEL; ROUGHNESS AMPLITUDE; SECONDARY ATOMIZATION; SECONDARY DROPLETS; SURFACE PATTERNING; THEORETICAL PREDICTION; THERMAL BEHAVIORS; WETTING BEHAVIOR; WETTING PROPERTY;

ATOMIZATION; DROPS; MODELS; WETTING;

SURFACE TOPOGRAPHY;

EID: 84861698072     PISSN: 07234864     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00348-011-1106-2     Document Type: Article

References (57)

1. Akhtar SW, Yule AJ (2001) Droplet impaction on a heated surface at high Weber numbers. ILASS-Europe 2001, Zurich
2. Akhtar SW, Nasr GG, Yule AJ (2007a) Characteristics of water droplet impaction behaviour on a polished steel heated surface: part I. Atom Sprays 17(8):659-681 (Pubitemid 47011538)
3. Akhtar SW, Nasr GG, Yule AJ (2007b) Characteristics of water droplet impaction behaviour on a polished steel heated surface: part II. Atom Sprays 17(8):683-729 (Pubitemid 47011539)
4. Bai CX, Gosman AD (1995) Development of a methodology for spray impingement simulation. SAE paper no. 950283
5. Bernardin JD, Mudawar I (1996) Experimental and statistical investigation of change in surface roughness associated with spray quenching. Int J Heat Mass Transf 39(10):2023-2037 (Pubitemid 126379731)
6. Bertola V, Sefiane K (2005) Controlling secondary atomization during drop impact on hot surfaces by polymer additives. Phys Fluids 17(1):108104
7. Cassie AB, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40:546-551
8. Chen Y, He B, Lee J, Patankar NA (2005) Anisotropy in the wetting of rough surfaces. J Coll Interface Sci 281:458-464 (Pubitemid 39574837)
9. Cossali GE, Marengo M, Santini M (2005) Secondary atomization produced by single drop vertical impacts onto heated surfaces. Exp Thermal Fluid Sci 29:946-973
10. Cossali GE, Marengo M, Santini M (2008) Thermally induced secondary atomization produced by single drop impact onto heated surfaces. Int J Heat Fluid Flow 29(1):167-177
11. Fujimoto H, Yosuke O, Ogihara T, Takuda H (2010) Hydrodynamics and boiling phenomena of water droplets impinging on hot solid. Int J Multiph Flow 36:620-642
12. Gao L, McCarthy TJ (2007) How Wenzel and Cassie were wrong. Langmuir 23(7):3762-3765 (Pubitemid 46581903)
13. Gavaises M, Theodorakakos A, Bergeles G (1996) Modeling wall impaction of Diesel sprays. Int J Heat Fluid Flow 17(2):130-138
14. Gipperich A, Lembach AN, Roisman IV, Tropea C (2010) On the splashing threshold of a single droplet impacting onto rough and porous surfaces. In: Proceedings of 23rd ILASS-2010, Brno, Czech Republic
15. He B, Patankar NA, Lee J (2003) Multiple equilibrium droplet shapes and design criterions for rough hydrophobic surfaces. Langmuir 19:4999-5003
16. Heffington SN, Black WZ, Glezer A (2002) Vibration induced droplet atomization heat transfer cell for high heat flux applications. IEEE inter society conference on thermal phenomena, pp 408-412
17. Herminghaus S, Brinkmann M, Seemann R (2008) Wetting and dewetting of complex surface geometries. Annu Rev Mater Res 38:101-121
18. Honda H, Wei J (2004) Enhanced boiling heat transfer from electronic components by use of surface microstructures. Exp Thermal Fluid Sci 28:159-169 (Pubitemid 38033977)
19. Hsieh C-C, Yao S-C (2006) Evaporative heat transfer characteristics of a water spray on micro-structured silicon surfaces. Int J H Mass Transf 49:962-974 (Pubitemid 43267707)
20. Incropera FP, DeWitt DP (1990) Fundamentals of heat and mass transfer, 3rd edn. Wiley, New York
21. Moita AS, Moreira ALN (2003) Influence of surface properties on the dynamic behaviour of impacting droplets. In: Proceedings of 9th ICLASS-Europe2003, Sorrento, Italy
22. Moita AS, Moreira ALN (2007) Drop impacts onto cold and heated rigid surfaces: morphological comparisons, disintegration limits and secondary atomization. Int J Heat Fluid Flow 28(4):735-772
23. Moita AS, Moreira ALN (2009) Development of empirical correlations to predict the secondary droplet size of impacting droplets onto heated surfaces. Exp Fluids 47:755-768
24. Moreira ALN, Moita AS, Cossali GE, Marengo M, Santini M (2007) Secondary atomization of water and isooctane drops impinging onto tilted heated surfaces. Exp Fluids 43:297-313 (Pubitemid 47293406)
25. Moreira ALN, Moita AS, Panão MRO (2010) Advances and challenges in explaining fuel spray impingement: how much of single droplet impact research is useful? Prog En Comb Sci 36:554-580
26. Müller A, Dullenkopf K, Bauer H-J (2008) Analysis of droplet wall interactions with graded surface roughness. In: Proceedings of 22nd ILASS-2008, Como Lake, Italy
27. Mundo CHR, Sommerfeld M, Tropea C (1995) Droplet-wall collisions: experimental studies of the deformation and break-up processes. Int J Multiphase Flow 21(2):151-173
28. Naber JD, Farrel P (1993) Hydrodynamics of droplet impingement on a heated surface. SAE paper no. 930919
29. Nakae H, Yoshida M, Yokota M (2005) Effects of roughness pitch of surfaces on their wettability. J Mat Sci 40:2287-2293 (Pubitemid 40878237)
30. Nosonovsky M, Bhushan B (2007) Hierarchical roughness optimization for biomimetic superhydrophobic surfaces. Ultramicroscopy 107:969-979 (Pubitemid 47095108)
31. Öner D, McCarthy TJ (2000) Ultrahydrophobic surfaces. Effects of topography length scales on wettability. Langmuir 16: 7777-7782
32. Özisik MN (1985) Heat transfer: a basic approach, 1st edn. McGraw-Hill, Inc., Singapore
33. Palacios J, Gómez P, Zanzi C, López J, Hernández J (2010) Experimental study on the splash/deposition limit in drop impact onto solid surfaces. In: Proceedings of 23rd ILASS-2010, Brno, Czech Republic
34. Pan K-L, Tseng K-C, Wang C-H (2010) Break-up of a droplet at high velocity impacting a solid surface. Exp Fluids 48:143-156
35. Plawsky JL, Ojha M, Chatterjee A, Wayner PC Jr (2009) Review of the effects of surface topography, surface chemistry, and fluid physics on evaporation at the contact line. Chem Eng Commun 196(5):658-696
36. Qiao YM, Chandra S (1997) Experiments on adding a surfactant to water drops boiling on a hot surface. Proc R Soc Lond A 453:673-689
37. Range K, Feuillebois F (1998) Influence of surface roughness on liquid drop impact. J Col Int Sci 203:16-30 (Pubitemid 28384346)
38. Richter B, Dullenkopf K, Bauer H-J (2005) Investigation of secondary droplet characteristics produced by an isooctane drop chain impact onto a heated piston surface. Exp Fluids 39:351-363 (Pubitemid 41240038)
39. Rioboo R, Tropea C, Marengo M (2001) Outcome from a drop impact on solid surfaces. Atom Sprays 11:155-165 (Pubitemid 34277945)
40. Seemann R, Brinkmann M, Kramer EJ, Lange FF, Lipowsky R (2005) Wetting morphologies at microstructured surfaces. PNAS 12(6):1848-1852 (Pubitemid 40261975)
41. Seki M, Kawamura H, Sanokawa K (1978) Transient temperature profile of a hot wall due to an impinging liquid droplet. J Heat Transf 100:167-169 (Pubitemid 8580001)
42. Shen J, Graber C, Liburdy J, Pence D, Narayanan V (2010) Simultaneous droplet impinging dynamics and heat transfer on nano-structured surfaces. Exp Thermal Fluid Sci 34:496-503
43. Silk EA, Kim J, Kiger K (2006) Spray cooling of enhanced surfaces: impact of structured geometry and spray axis inclination. Int J H Mass Transf 49:4910-4920 (Pubitemid 44635463)
44. Sodke C, Stephan O (2007) Spray cooling on micro-structured surfaces. Int J H Mass Transf 50:4089-4097
45. Stow CD, Hadfield MG (1981) An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface. Proc R Soc Lond A 373:419-441
46. Stow CD, Steiner RD (1977) The physical products of a splashing water drop. J Met Soc Jpn 55(5):518-531
47. Tamura Z, Tanasawa Y (1959) Evaporation and combustion of a drop contacting with a hot surface. In: 7th symposium of (international) combustion, Buttertvorths, London, pp 509-522
48. Turns SR (1996) An introduction to combustion: concepts and applications, McGraw-Hill, New York
49. Vander Wall RLG, Berger GM, Mozes SD (2006) The combined influence of a rough surface and thin fluid film upon the splashing threshold and splash dynamics of a droplet impacting onto them. Exp Fluids 40:23-32 (Pubitemid 41783443)
50. Varanasi KK, Paxson A, Smyth K, Kwon H-M (2010) Droplet impingement and wetting hysteresis on textured hydrophobic surfaces. In: Proceedings of 14th international heat transfer conference, IHTC-14, Washington DC, USA
51. Vukasinovic B, Smith MK, Glezer A (2004) Spray characterization during vibration induced drop atomization. Phys Fluids 16(2):396-405
52. Wenzel RN (1936) Resistance of solid surfaces to wetting by water. Ind Eng Chem 28(8):988-994
53. Wolansky G, Marmur A (1998) The actual contact angle on a heterogeneous rough surface in three dimensions. Langmuir 14:5292-5297 (Pubitemid 128612866)
54. Wu Z (1992) Modélisation et calcul implicite multidomaine d'écoulements diphasiques gas-gouttelettes. PhD. Thesis, Université Pierre et Marie Curie, Paris, France
55. Xu L (2008) Liquid drop splashing on smooth, rough and textured surfaces. Phys Rev E 75:056316
56. Yan YY, Zu YQ, Tian CQ, Gao N (2010) Droplets on micro structured or patterned surfaces with different roughness parameters. In: Proceedings of 14th international heat transfer conference, IHTC-14, Washington DC, USA
57. Young T (1805) An essay on the cohesion of fluids. Phil Trans R Soc Lond 95:65-87