Secondary atomization of water and isooctane drops impinging on tilted heated surfaces

Experiments in Fluids

Volumn 43, Issue 2-3, 2007, Pages 297-313

  Moreira, A L N ^a   Moita, A S ^a   Cossali, E ^b   Marengo, M ^b   Santini, M ^b  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

^b UNIVERSITY OF BERGAMO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

DROPS; HEAT TRANSFER; IMAGE PROCESSING; INTERNAL COMBUSTION ENGINES; MORPHOLOGY; STAINLESS STEEL; WATER;

HEATED SURFACES; WATER DROPLETS; WEBER NUMBERS;

ATOMIZATION;

ATOMIZATION; DROPS; HEAT TRANSFER; IMAGE PROCESSING; INTERNAL COMBUSTION ENGINES; MORPHOLOGY; STAINLESS STEEL; WATER;

EID: 34548098701     PISSN: 07234864     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00348-007-0330-2     Document Type: Article

References (52)

1. Akao F, Araki K, Mori S, Moriyama A (1980) Deformation behaviour of a liquid droplet impinging onto a hot metal surface. Trans ISIJ 20:737-743
2. Akhtar SW, Yule AJ (2001) Droplet impaction on a heated surface at high Weber numbers. ILASS-Europe, Zurich
3. Anders K, Roth N, Frohn A (1993) The velocity change of ethanol droplets during collision with a wall analysed by image processing. Exp Fluids 15:91-96
4. Araki K, Moriyama A (1982) Deformation behaviour of a liquid droplet impinging on a hot metal surface. ICLASS1982, Madison, Wisconsin, pp 389-396
5. Avedisian CT, Koplik J (1987) Leidenfrost boiling of methanol on hot porous/ceramic surfaces. Int J Heat Mass Tran 30:379-393
6. Bai C, Rusche H, Gosman AD (2002) Modeling of gasoline spray impingement. Atomization Spray 12:1-27
7. Baumeister KJ, Henry RE, Simon FF (1970) Role of the surface in the measuerement of the Leidenfrost temperature. In: Bergles AE, Webb RL (eds) Augmentation of convective heat and mass transfer. ASME, New York, pp 91-101
8. Bernardin JD, Stebbins CJ, Mudawar I (1997a) Mapping of impact and heat transfer regimes of water drops impinging on a polished surface. Int J Heat Mass Transf 40(2):247-267
9. Bernardin JD, Stebbins CJ, Mudawar I (1997b) Effect of surface roughness on water droplet impact history and heat transfer regimes. Int J Heat Mass Transf 40(1):73-88
10. Celata GP, Cumo M, Mariani A, Zummo G (2006) Visualization of the velocity of water drops on a hot surface: effect of drop velocity and surface inclination. Heat Mass Transf 42:885-890
11. Chaves H, Kubitzek AM, Obermeier F (1999) Dynamic processes occurring during the spreading of thin liquid films produced by drop impact on hot walls. Int J Heat Fluid Flow 20:470-476
12. Cossali GE, Marengo M, Santini M (2005a) Single drop empirical models for spray impact on solid walls: a review. Atomisation Sprays 15:699-736
13. Cossali GE, Marengo M, Santini M (2005b) Secondary atomization produced by single drop vertical impacts onto heated surfaces. Exp Therm Fluid Sci 29:937-946
14. Cossali GE, Marengo M, Santini M (2005c) Effects of wall effusivity on secondary droplet atomization from single and multiple impacts onto heated surfaces. In: Proceedings of the 19th ILASS-Europe 2005, Orléans, France
15. Cossali GE, Marengo M, Santini M, Watanabe J (2002) Secondary droplet atomization from single drop impact on heated surfaces. In: Proceedings of the 18th ILASS-Europe 2002, Zaragoza, Spain, pp 111-116
16. Cowart J, Cheng W (1999) Intake valve thermal behavior during steady state and transient engine operations. SAE Technical Paper 1999-01-3643
17. Cumo M, Farrelo GE, Ferrari G (1969) Notes on droplet heat transfer. Chem Eng Prog Symp Ser 65:175-187
18. Fan L, Reitz RD (2000) Spray and combustion modelling in gasoline direct-injection engines. Atomization Spray 10:219-249
19. Girard JW, Dibble RW, Flowers DL, Aceves SM (2002) An investigation of the effect of fuel-air mixedness on the emissions from an HCCI engine. SAE Technical paper 2002-01-1758
20. Kang BS, Lee DH (2000) On the dynamic behavior of a liquid droplet impacting upon an inclined heated surface. Exp Fluids 29:380-387
21. Karl A, Anders K, Rieber M, Frohn A (1996) Deformation of liquid droplets during collisions with hot walls: experimental and numerical results. Part Syst Charact 13:186-191
22. Karl A, Frohn A (2000) Experimental investigation of interaction processes between droplets and hot walls. Phys Fluids 12:785-796
23. Ko YS, Chung SH (1996) An experiment on the breakup of impinging droplets on a hot surface. Exp Fluids 21:118-123
24. Kuhnke D (2004) Spray wall interaction modeling by dimensionless data analysis. Ph.D. Thesis accepted by Fachbereich Mathematik, Technischen Universitat Darmstadt
25. Lee SH, Ryou HS (2000) Development of a new spray/wall interaction model. Int J Multiphase Flow 26:1209-1234
26. Lindgren R, Denbratt I (2000) Modeling gasoline spray-wall interaction-a review of current models. SAE Paper 2000-01-2808
27. Lindgren R, Denbratt I (2004) Modeling gasoline spray-wall interactions and comparison to experimental data. SAE Technical paper 2004-01-3003
28. Moita AS, Moreira AL (2003) The deformation of single droplets impacting onto a flat surface. SAE 2002 Transactions-Journal of Fuels and Lubrificants, USA, pp 1477-1490
29. Moita AS, Moreira AL (2005) The interaction of fuel droplets with heated interposed surfaces in IC Engines. SAE_ICE2005. Paper No. 20025-24-084
30. Moita AS, Moreira ALN (2007) Experimental study of fuel drop impacts onto rigid surfaces: morphological comparisons, disintegration limits and secondary atomization. Proc Combust Inst 31:2175-2183
31. Mundo C, Sommerfeld M, Tropea C (1998) On the modeling of liquid sprays impinging on surfaces. Atomization Spray 8:625-652
32. Mundo C, Tropea C, Sommerfeld M (1997) Numerical and experimental investigation of spray characteristics in the vicinity of a rigid wall. Exp Therm Fluid Sci 15:228-237
33. Mundo CH, Sommerfeld M, Tropea C (1995) Droplet-wall collisions: experimental studies of the deformation and break-up processes. Int J Multiphase Flow 21:151-173
34. Naber JD, Farell PV (1993) Hydrodynamics of droplet impingement on a heated surface. SAE Techical Paper No. 930919
35. Naber JD, Farell PV (1993) Hydrodynamics of droplet impingement on a heated surface. SAE Techical Paper No. 930919
36. Nishio S, Hirata M (1977) Study on the Leidenfrost temperature (2nd report, behaviour of liquid-solid surface contact and Leidenfrost temperature). Trans JSME 44:1335-1346
37. Panão MRO, Moreira ALN (2005) Thermo and fluid dynamics characterization of spray cooling with pulsed spray. Exp Therm Fluid Sci 30:79-96
38. Rein M (ed) (2003) Interactions between drops and hot surfaces. Drop-surface interactions. Springer, New York, pp 185-217
39. Richter B, Dullenkopf K, Bauer H-J (2005) Investigation of secondary droplet characteristics produced by an isooctane drop chain impact onto a heated piston surface. Exp Fluids 39:351-363
40. Ricther B, Dullenkopf K, Wittig S (2003) Wall impact of single droplets under conditions of DISI Engines. In: Proceedings of the 9th international conference of liquid atomization and spray systems, Sorrento, Italy
41. Ricther B, Dullenkopf K, Wittig S (2004) Investigation of secondary droplet characteristics produced during wall impact. In: Proceedings of the 12th international symposium laser techniques application fluid mechanics, Lisbon, Portugal
42. Rioboo R, Marengo M, Tropea C (2002) Time evolution of liquid drop impact onto solid, dry surfaces. Exp Fluids 33(1):112-124
43. Rioboo R, Tropea C, Marengo M (2000) Outcome from a drop impact on solid surfaces. Atomization Spray 4
44. Roisman IV, Horvat H, Tropea C (2006) Spray impact: rim transverse instability initiating fingering and splash, and description of a secondary spray. Phys Fluids 18:102-104
45. Seki M, Kawamura H, Sanokawa K (1978) Transient temperature profile of a hot wall due to an impinging liquid droplet. ASEM J Heat Transf 100:167-169
46. Takeuchi K, Senda J, Yamada K (1983) Heat transfer characteristics and the breakup behavior of small droplets impinging upon a hot surface. ASME-JSME Therm Eng Joint Conf 1:165-172
47. Thedorakakos A, Gavaises M, Bergeles G (1996) Modeling wall impaction of diesel sprays. Int J Heat Fluid Flow 17:130-138
48. Tomoda T, Kubota M, Shimizu R, Nomura Y (2001) Numerical analysis of mixture formation of a diesel injection gasoline engine. In: Proceedings of the 5th international symposium on diagnostics and modeling of combustion in internal combustion engines. Comodia
49. Tropea C, Roisman I (2005) Spray/wall interaction: how much physics do we need in our models? In: Proceedings of the 6th world conference on experiment heat transfer, fluid mechanics, and thermodynamics. Matsushima, Miyagi, Japan
50. Wachters LHJ, Westerling NAJ (1966) The heat transfer from a hot wall to impinging water drops in the spheroidal state. Chem Eng Sci 21:1047-1056
51. Wang YP, Wilkinson GB, Drallmeier JA (2004) Parametric study on the fuel film breakup of a cold start PFI engine. Exp Fluids 37:385-398
52. Yao SC, Cai KY (1988) The dynamics and Leidenfrost temperature of drops impacting on a hot surface at small angles. Exp Therm Fluid Sci 1:363-371