Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization

International Journal of Heat and Fluid Flow

Volumn 28, Issue 4, 2007, Pages 735-752

  Moita, A S ^a   Moreira, A L N ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Boiling regimes; Disintegration mechanisms; Drop impact; Drop morphology; Nature of the surface; Secondary droplet characteristics

Indexed keywords

DROP IMPACT; DROPLET DISINTEGRATION; FLOW CONFIGURATION;

ATOMIZATION; BOILING LIQUIDS; FLOW VISUALIZATION; HEAT TRANSFER; IMAGE PROCESSING; MORPHOLOGY; SURFACE ROUGHNESS; VAPOR PRESSURE; VAPORIZATION; WETTING;

DROPS;

ATOMIZATION; BOILING LIQUIDS; DROPS; FLOW VISUALIZATION; HEAT TRANSFER; IMAGE PROCESSING; MORPHOLOGY; SURFACE ROUGHNESS; VAPOR PRESSURE; VAPORIZATION; WETTING;

EID: 34447302310     PISSN: 0142727X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatfluidflow.2006.10.004     Document Type: Article

References (54)

1. Akao F., Araki S., and Mori Moriyama A. Deformation behaviour of a liquid droplet impinging onto a hot metal surface. Trans. ISIJ 20 (1980) 737-743
2. Akhtar, S.W., Yule, A.J., 2001. Droplet impaction on a heated surface at high Weber numbers. ILASS-Europe 2001, Zurich.
3. Araki K., and Moriyama A. Deformation behaviour of a liquid droplet impinging on a hot metal surface. Iclass 1982 (1982) 389-396
4. Arcoumanis, C., Cutter, P.A., 1995. Flow and heat transfer characteristics of impinging Diesel sprays under cross-flow conditions. SAE Paper 950448.
5. Arcoumanis C., Whitelaw D.S., and Whitelaw J.H. Gasoline injection against surfaces and films. Atomizat. Sprays 7 (1997) 437-456
6. Bartolo D., Josserand C., and Bonn D. Singular jets and bubbles in drop impact. Phys. Rev. Lett. 96 (2006) 124501
7. Bernardin J.D., and Mudawar I. Experimental and statistical investigation of change in surface roughness associated with spray quenching. Int. J. Heat Mass Transfer 39 10 (1996) 2023-2037
8. Bernardin J.D., Stebbins C.J., and Mudawar I. Effects of surface roughness on water droplet impact history and heat transfer regimes. Int. J. Heat Mass Transfer 40 1 (1997) 73-78
9. Bico J., Marzolin C., and Quéré D. Pearl drops. Europhys. Lett. 47 2 (1999) 220-226
10. Blake, T.D., 1993. Dynamic contact angles and wetting kinetics. In: Berg. J.C. (Ed.), Wettability, p. 251.
11. Bussman M., Chnadra S., and Mostaghimi J. Modeling the splash of a droplet impacting a solid surface. Phys. Fluids 12 12 (2000) 3121-3132
12. Cassie A.B., and Baxter S. Wettability of porous surfaces. Trans. Faraday Soc. 40 (1944) 546-551
13. Chandra S., and Avedisian C.T. On the collision of a droplet with a solid surface. Proc. R. Soc. London, Ser. A 432 (1991) 13-41
14. Chaves H., Kubitzek A.M., and Obermeier F. Dynamic processes occurring during the spreading of thin liquid films produced by drop impact on hot walls. Int. J. Heat Fluid Flow 20 (1999) 470-476
15. Cossali, G.E., Marengo, M., Santini, M., Watanabe, J., 2002. Secondary droplet atomization from single drop impact on heated surfaces. In: Proceedings of 18th ILASS-Europe2002, Zaragoza, pp. 111-116.
16. Cossali G.E., Marengo M., Coghe A., and Zhdanov S. The role of time in single droplet splash on thin film. Exp. Fluids 36 6 (2004) 888-900
17. Cossali G.E., Marengo M., and Santini M. Secondary atomization produced by single drop vertical impact onto heated surfaces. Exp. Therm. Fluid Sci. 29 (2005) 937-946
18. Cossali, G.E., Marengo, M., Santini, M., 2005b. Effects of wall effusivity on secondary droplet atomization from single and multiple impact onto heated surfaces. In: Proceedings of 19th ILASS-Europe 2005, Orléans, France.
19. Extrand C.W. Model for contact angles and hysteresis on rough and ultraphobic surfaces. Langmuir 18 (2002) 7991-7999
20. Extrand C.W. Criteria for ultralyphobic surfaces. Langmuir 20 (2004) 5013-5018
21. Fan L., and Reitz R.D. Spray and combustion modelling in gasoline direct-injection engines. Atomizat. Sprays 10 (2000) 219-249
22. Fedorchenko A.I., and Wang A.-B. On some common features of drop impact on liquid surfaces. Phys. Fluids 16 5 (2004) 1349-1365
23. He B., Neelesh Patankar A., and Lee J. Multiple equilibrium droplet shapes and design criterions for rough hydrophobic surfaces. Langmuir 19 (2003) 4999-5003
24. Kandlikar S.G., and Steinke M.E. Contact angles of droplets during spread and recoil after impinging on a heated surface. J. Ch. Eng. Res. Des. 79 (2001) 491-498
25. Karl A., and Frohn A. Experimental investigation of interaction processes between droplets and hot walls. Phys. Fluids 12 4 (2000) 785-796
26. Karl A., Anders K., Rieber M., and Frohn A. Deformation of liquid droplets during collisions with hot walls: experimental and numerical results. Part. Syst. Charact. 13 (1996) 186-191
27. Kuhnke, D., 2004. Spray Wall Interaction Modeling by Dimensionless Data Analysis. Ph.D. Thesis, accepted by Fachbereich Mathematik, Technischen Universitat Darmstadt.
28. 3 (HFE-7100) and n-heptane droplets on a heated solid surface. Int. J. Heat Mass Transfer 45 (2002) 3961-3971
29. Marmur A. Wetting on hydrophobic rough surfaces: to be heterogeneous or not to be. Langmuir 19 (2003) 8343-8348
30. Matsui, Y., Sugihara, K., 1988. Sources of hydrocarbon emissions from a small direct injection Diesel engine. JSAE Review 7.
31. Moita A.S., and Moreira A.L. The deformation of single droplets impacting onto a flat surface. SAE 2002 Trans. - J. Fuels Lubrificants, USA (2002) 1477-1490
32. Moita A.S., and Moreira A.L. The dynamic behaviour of single droplets impacting onto a flat surface. ILASS-Europe 2002 (2002) 157-162
33. Mundo C.H.R., Sommerfeld M., and Tropea C. Droplet-wall collisions: experimental studies of the deformation and break-up processes. Int. J. Multiphase Flow 21 2 (1995) 151-173
34. Naber, J.D., Farrel, P., 1993. Hydrodynamics of droplet impingement on a heated surface. SAE Paper 930919.
35. Norris-Jones, S.R., Hollis, T., Waterhouse, C.N.F., 1984. A study of the formation of particulates in the cylinder of a direct injection Diesel engine. SAE Paper 840419.
36. Pasandideh-Fard M., Quiao Y.M., Chandra S., and Mostaghimi J. Capillary effects during droplet impact on a solid surface. Phys. Fluids 8 3 (1996) 650-658
37. Patankar N.A. On the modeling of hydrophobic contact angles on rough surfaces. Langmuir 19 (2003) 1249-1253
38. Pitcher, G., Winklhofer, E., 1998. Droplet size and velocity measurements in the spray of a Direct Injection Gasoline injector. ICLASS-Europe'98.
39. Quéré D., Lafuma A., and Bico J. Slippy and sticky microtextured solids. Nanotechnology 14 (2003) 1109-1112
40. Range K., and Feuillebois F. Influence of surface roughness on liquid drop impact. J. Col. Int. Sci. 203 (1998) 16-30
41. Rioboo R., Tropea C., and Marengo M. Outcome from a drop impact on solid surfaces. Atomizat. Sprays J. 4 (2000)
42. Rioboo R., Marengo M., and Tropea C. Time evolution of liquid drop impact onto solid, dry surfaces. Exp. Fluids 33 1 (2002) 112-124
43. Roisman I.V., and Tropea C. Time evolution of liquid drop impact onto a wetted wall: description of crown formation and propagation. J. Fluid Mech. 472 (2002) 373-397
44. Stow C.D., and Hadfield M.G. An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface. Proc. R. Soc. London, Ser. A 373 (1981) 419-441
45. Thoroddsen S.T., and Sakakibara J. Evolution of the fingering pattern of an impacting drop. Phys. Fluids 10 (1998) 1359-1374
46. Tomoda, T, Kubota, M, Shimizu, R., Nomura, Y., 2001. Numerical analysis of mixture formation of a direct injection gasoline engine. In: The Fifth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, Comodia 2001, Nagoya.
47. Vignes-Adler M. Physico-chemical aspects of forced wetting. In: Rein M. (Ed). Drop-Surface Interactions (2002), SpringerWien, NewYork 103
48. Wachers L.H.J., and Westerling N.A.J. The heat transfer from horizontal plate to sessile water drops in the spheroidal state. Chem. Eng. Sci. 21 (1966) 923-936
49. Wenzel R.N. Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28 8 (1936) 988-994
50. Wu, Z., 1992. Modélisation et calcul implicite multidomaine d'écoulements diphasiques gas-gouttelettes. Ph.D. Thesis, Université Pierre et Marie Curie, Paris, France.
51. Xu L., Zahang W.W., and Nagel S.R. Drop splashing onto a dry smooth surface. Phys. Rev. Lett. 94 (2005) 184505
52. Yarin A.L. Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing .... Annu. Rev. Fluid. Mech. 38 (2006) 159-192
53. Yarin A.L., and Weiss D.A. Impact of drops on solid surfaces: self-similar capillary waves and splashing as a new type of kinematic discontinuity. J. Fluid Mech. 283 (1995) 141-173
54. Yoshikawa, S., Furusawa, R., Ariai, M., Hiroyasu, H., 1989. Optimizing spray behavior to improve engine performance and to reduce exhaust emissions in a small D.I. Diesel engine. SAE Paper 890463.