Quantification of mineral behavior in four dimensions: Grain boundary and substructure dynamics in salt

Geochemistry, Geophysics, Geosystems

Volumn 13, Issue 5, 2012, Pages

  Borthwick, V E ^a   Schmidt, S ^b   Piazolo, S ^a,c   Gundlach, C ^d,e  

^a STOCKHOLM UNIVERSITY   (Sweden)

^b TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^c MACQUARIE UNIVERSITY   (Australia)

^d EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

^e LUND UNIVERSITY   (Sweden)

Author keywords

annealing; EBSD; halite; in situ; surface effects; X ray diffraction

Indexed keywords

ANNEALING; DYNAMICS; GRAIN BOUNDARIES; SCANNING ELECTRON MICROSCOPY; SODIUM CHLORIDE; SURFACES; TWO DIMENSIONAL; X RAY DIFFRACTION;

3D X-RAY DIFFRACTION; CRYSTALLOGRAPHIC ORIENTATIONS; DRAG FORCES; EBSD; FREE SURFACES; GEOLOGICAL MATERIALS; HALITE CRYSTALS; IN-DEPTH UNDERSTANDING; IN-SITU; IN-SITU ANNEALING; IN-SITU EXPERIMENTS; MINERAL BEHAVIOR; MISORIENTATION ANGLE; RECOVERY PROCESS; RELATIVE MOBILITY; SCANNING ELECTRON MICROSCOPE; SUBGRAIN BOUNDARIES; SUBGRAINS; SURFACE EFFECT; THREE DIMENSIONAL SPACE; TIME-RESOLVED; TWO-DIMENSIONAL SURFACE;

EXPERIMENTS;

ANNEALING; CRYSTAL STRUCTURE; CRYSTALLOGRAPHY; DEFORMATION MECHANISM; FOUR-DIMENSIONAL MODELING; HALITE; IN SITU MEASUREMENT; MICROSTRUCTURE; MINERALOGY; PREFERRED ORIENTATION; QUANTITATIVE ANALYSIS; SCANNING ELECTRON MICROSCOPY; THREE-DIMENSIONAL MODELING; X-RAY DIFFRACTION;

EID: 84861308590     PISSN: None     EISSN: 15252027     Source Type: Journal    
DOI: 10.1029/2012GC004057     Document Type: Article

References (40)

1. Ashby, M. F. (1970), The deformation of plastically non-homogeneous materials, Philos. Mag., 21, 399-424, doi:10.1080/14786437008238426.
2. Babcock, S. E., and R. W. Balluffi (1989), Grain boundary kinetics-I. In situ observations of coupled grain boundary dislocation motion, crystal translation and boundary displacement, Acta Metall., 37, 2357-2365, doi:10.1016/0001- 6160(89)90033-3. (Pubitemid 20632221)
3. Barnhoorn, A., M. Bystricky, L. Burlini, and K. Kunze (2005), Post-deformational annealing of calcite rocks, Tectonophysics, 403, 167-191, doi:10.1016/j.tecto.2005.04.008. (Pubitemid 40882157)
4. Baruchel, J., P. Bleuet, A. Bravin, P. Coan, E. Lima, A. Madsen, W. Ludwig, P. Pernot, and J. Susini (2008), Advances in synchrotron hard X-ray based imaging, C. R. Phys., 9, 624-641, doi:10.1016/j.crhy.2007.08.003.
5. Bass, J. D., and J. B. Parise (2008), Deep Earth and recent developments in mineral physics, Elements, 4(3), 157-163, doi:10.2113/GSELEMENTS.4.3.157.
6. Beck, R. (1954), Annealing of cold worked metals, Adv. Phys., 3, 245-324, doi:10.1080/00018735400101203.
7. Bestmann, M., S. Piazolo, C. J. Spiers, and D. J. Prior (2005), Microstructural evolution during initial stages of static recovery and recrystallization: New insights from in-situ heating experiments combined with electron backscatter diffraction analysis, J. Struct. Geol., 27(3), 447-457, doi:10.1016/j. jsg.2004.10.006. (Pubitemid 40306672)
8. Bever, M. B. (1957), Creep and Recovery, Am. Soc. Met., Cleveland, Ohio.
9. Borthwick, V. E., and S. Piazolo (2010), Post-deformational annealing at the subgrain scale: Temperature dependent behaviour revealed by in-situ heating experiments on deformed single crystal halite, J. Struct. Geol., 32(7), 982-996, doi:10.1016/j.jsg.2010.06.006.
10. Brokman, A., R. Kris, W. W. Mullins, and A. J. Vilenkin (1995), Analysis of boundary motion in thin films, Scr. Metall. Mater., 32(9), 1341-1346, doi:10.1016/0956-716X(95) 00168-U.
11. Caillard, D., and J. L. Martin (1982), Microstructure of aluminium during creep at intermediate temperature-II. In situ study of subboundary properties, Acta Metall., 30, 791-798, doi:10.1016/0001-6160(82)90077-3. (Pubitemid 12513499)
12. Covey-Crump, S. J. (1997), The high temperature static recovery and recrystallization behaviour of cold-worked Cararra marble, J. Struct. Geol., 19(2), 225-241, doi:10.1016/S0191-8141(96)00088-0. (Pubitemid 27419600)
13. Duffy, T. S. (2005), Synchrotron facilities and study of Earth's deep interior, Rep. Prog. Phys., 68, 1811-1859, doi:10.1088/0034-4885/68/8/R03. (Pubitemid 41024592)
14. Duffy, T. S. (2008), Mineralogy at the extremes, Nature, 451, 269-270, doi:10.1038/nature06584.
15. Field, D. P., L. T. Bradford, M. M. Nowell, and T. M. Lillo (2007), The role of annealing twins during recrystallization of Cu, Acta Mater., 55, 4233-4241, doi:10.1016/j.actamat. 2007.03.021. (Pubitemid 46880461)
16. Frost, H. J., C. V. Thompson, and D. T. Walton (1990), Simulation of thin film grain structures: I Grain growth stagnation, Acta Metall. Mater., 38, 1455-1462, doi:10.1016/0956- 7151(90)90114-V.
17. Fu, X., H. F. Poulsen, S. Schmidt, S. F. Nielsen, E.M. Lauridsen, and D. Juul Jensen (2003), Non-destructive mapping of grains in three dimensions, Scr. Mater., 49, 1093-1096, doi:10.1016/j.scriptamat.2003.08.007.
18. Gottstein, G., and L. S. Shvindlerman (2010), Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications, CRC Press, Boca Raton, Florida.
19. Gundlach, C., W. Pantleon, E. M. Lauridsen, L. Margulies, R. D. Doherty, and H. F. Poulsen (2004), Direct observation of subgrain evolution during recovery of cold-rolled aluminum, Scr. Mater., 50, 477-481, doi:10.1016/j. scriptamat. 2003.10.034.
20. Heilbronner, R., and J. Tullis (2002), The effect of static annealing on microstructures and crystallographically preferred orientations of quartzites experimentally deformed in axial compression and shear, in Deformation Mechanisms, Rheology, and Tectonics: Current Status and Future Perspectives, edited by S. de Meer et al., Geol. Soc. Spec. Publ., 200, 191-218, doi:10.1144/GSL.SP.2001.200.01.12.
21. Hobbs, B. E. (1968), Recrystallization of single crystals of quartz, Tectonophysics, 6, 353-401, doi:10.1016/0040- 1951(68)90056-5.
22. Humphreys, F. J., and M. Hatherly (2004), Recrystallization and Related Annealing Phenomena, 3rd ed., Elsevier, Oxford, U. K.
23. Lauridsen, E. M., S. Schmidt, L. Margulies, H. F. Poulsen, and D. Juul Jensen (2001), Growth kinetics of individual cube grains as studied by the 3D X-ray diffraction microscope, in Proceedings of the first Joint International Conference of Recrystallization and Grain Growth, edited by G. Gottstein and D. A. Molodov, pp. 981-986, Springer, Berlin.
24. Lauridsen, E. M., S. Schmidt, S. F. Nielsen, L. Margulies, H. F. Poulsen, and D. Juul Jensen (2006), Non-destructive characterization of recrystallization kinetics using three dimensional X-ray diffraction microscopy, Scr. Mater., 55, 51-56, doi:10.1016/j.scriptamat.2006.02.028. (Pubitemid 44287997)
25. Le Gall, R., G. Liao, and G. Saindrenan (1999), In-situ SEM studies of grain boundary migration during recrystallization of cold-rolled Nickel, Scr. Mater., 41, 427-432, doi:10.1016/S1359-6462(99)00109-8.
26. Means, W. D., and Z. G. Xia (1981), Deformation of crystalline materials in thin section, Geology, 9, 538-543, doi:10.1130/0091-7613(1981)9<538: DOCMIT>2.0.CO;2.
27. Mirpuri, K., H. Wendrock, K. Wetzig, and J. Szpunar (2006), Behaviour of (1 1 1) grains during the thermal treatment of copper film studied in situ by electron back-scatter diffraction, Microelectron. Eng., 83, 221-235, doi:10.1016/j.mee. 2005.08.008. (Pubitemid 43204300)
28. Mullins, W. W. (1958), The effect of thermal grooving on grain boundarymotion, ActaMetall., 6, 414-427, doi:10.1016/0001- 6160(58)90020-8.
29. Nes, E. (1995), Recovery revisited, Acta Metall. Mater., 43(6), 2189-2207, doi:10.1016/0956-7151(94)00409-9.
30. Nielsen, S. F., E. M. Lauridsen, D. Juul Jensen, and H. F. Poulsen (2001), A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals, Mater. Sci. Eng. A, 319-321, 179-181, doi:10.1016/S0921- 5093(01)01056-5. (Pubitemid 34122482)
31. Piazolo, S., M. W. Jessell, P. D. Bons, L. Evans, and C. W. Passchier (2002), Dominance of Microstructural Processes and their effect on Microstructural development: Insights from Numerical Modelling of dynamic recrystallization, Geol. Soc. Lond. Spec. Publ., 200, 149-170, doi:10.1144/GSL.SP.2001.200.01.10.
32. Piazolo, S., V. G. Sursaeva, and D. J. Prior (2005), The influence of triple junction kinetics on the evolution of polycrystalline materials during normal grain growth: New evidence from in-situ experiments using columnar Al foil, Z. Metallk., 96, 1152-1157. (Pubitemid 41633837)
33. Piazolo, S., M. Bestmann, D. J. Prior, and C. J. Spiers (2006), Temperature dependent grain boundary migration in deformedthen- annealed material: Observations from experimentally deformed synthetic rocksalt, Tectonophysics, 427, 55-71, doi:10.1016/j.tecto.2006.06.007. (Pubitemid 44718336)
34. Poulsen, H. F. (2004), Three-Dimensional X-ray Diffraction Microscopy: Mapping Polycrystals and Their Dynamics, Springer Tracts Mod. Phys., 205, 165 pp.
35. Poulsen, H. F., S. F. Nielsen, E. M. Lauridsen, S. Schmidt, R. M. Suter, U. Lienert, L. Margulies, T. Lorentzen, and D. Juul Jensen (2001), Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders, J. Appl. Crystallogr., 34, 751-756, doi:10.1107/S0021889801014273. (Pubitemid 33144101)
36. Poulsen, H. F., J. R. Bowen, and C. Gundlach (2004), Characterising the dynamics of individual embedded dislocation structures, Scr. Mater., 51, 783-788, doi:10.1016/j.scriptamat. 2004.06.024.
37. Schmidt, S., S. F. Nielsen, C. Gundlach, L. Margulies, X. Huang, and D. Juul Jensen (2004), Watching the growth of bulk grains during recrystallization of deformed metals, Science, 305, 229-232. (Pubitemid 38886733)
38. Schmidt, S., U. L. Olsen, H. F. Poulsen, H. O. Sørensen, E. M. Lauridsen, L. Margulies, C. Maurice, and D. Juul Jensen (2008), Direct observation of grain growth in Al-0.1% Mn, Scr. Mater., 59, 491-494, doi:10.1016/j.scriptamat.2008.04. 049.
39. Seward, G. G. E., S. Celotto, D. J. Prior, J. Wheeler, and R. C. Pond (2004), In situ SEM EBSD observations of the hcp to bcc phase transformation in commercially pure titanium, Acta Mater., 52, 821-832, doi:10.1016/j.actamat. 2003.10. 049.
40. White, S. (1977), Geological significance of recovery and recrystallization processes in quartz, Tectonophysics, 39, 143-170, doi:10.1016/0040-1951(77)90093-2.