Influence of primary crystallisation conditions on the mechanical and interfacial properties of micronised budesonide for dry powder inhalation

International Journal of Pharmaceutics

Volumn 430, Issue 1-2, 2012, Pages 26-33

  Kubavat, Harshal A ^a   Shur, Jagdeep ^a   Ruecroft, Graham ^b   Hipkiss, David ^b   Price, Robert ^a  

^a University of Bath   (United Kingdom)

^b Magdalen Centre   (United Kingdom)

Author keywords

Atomic force microscope; Crystallisation; Dry powder inhaler; Mechanical; Nanoindentation

Indexed keywords

BUDESONIDE; LACTOSE;

AEROSOL; ARTICLE; ATOMIC FORCE MICROSCOPY; CRYSTAL STRUCTURE; CRYSTALLIZATION; DRUG FORMULATION; DRY POWDER; PARTICLE SIZE; PHYSICAL CHEMISTRY; POWDER INHALER; PRIORITY JOURNAL;

ACETONE; ADMINISTRATION, INHALATION; AEROSOLS; BRONCHODILATOR AGENTS; BUDESONIDE; CHEMISTRY, PHARMACEUTICAL; COLLOIDS; CRYSTALLIZATION; DIMETHYLFORMAMIDE; DRUG CARRIERS; DRUG COMPOUNDING; DRY POWDER INHALERS; ELASTIC MODULUS; LACTOSE; MICROSCOPY, ATOMIC FORCE; NANOTECHNOLOGY; PARTICLE SIZE; POWDERS; SOLVENTS; SURFACE PROPERTIES; TECHNOLOGY, PHARMACEUTICAL; WATER;

EID: 84860774618     PISSN: 03785173     EISSN: 18733476     Source Type: Journal    
DOI: 10.1016/j.ijpharm.2012.03.020     Document Type: Article

References (39)

1. M.R. Abu Bakar, Z.K. Nagy, A.N. Saleemi, and C.D. Rielly The impact of direct nucleation control on crystal size distribution in pharmaceutical crystallization processes Cryst. Growth Des. 9 2009 1378 1384
2. J. Albertsson, Å. Oskarsson, and C. Svensson X-ray study of budesonide: molecular structures and solid solutions of the (22S) and (22R) epimers of 11β,21-dihydroxy-16α,17α-propylmethylenedioxy-1,4- pregnadiene-3,20-dione Acta Crystallogr. B: Struct. Crystallogr. Cryst. Chem. 34 1978 3027 3036
3. S. Banga, G. Chawla, D. Varandani, B.R. Mehta, and A.K. Bansal Modification of the crystal habit of celecoxib for improved processability J. Pharm. Pharmacol. 59 2007 29 39 (Pubitemid 46133041)
4. S. Beach, D. Latham, C. Sidgwick, M. Hanna, and P. York Control of the physical form of salmeterol xinofoate Org. Process Res. Dev. 3 1999 370 376
5. P. Begat, P. Young, S. Edge, J. Kaerger, and R. Price The effect of mechanical processing on surface stability of pharmaceutical powders: visualization by atomic force microscopy J. Pharm. Sci. 92 2003 611 620 (Pubitemid 36258976)
6. P. Begat, D. Morton, J. Staniforth, and R. Price The cohesive-adhesive balances in dry powder inhaler formulations. I. Direct quantification by atomic force microscopy Pharm. Res. 21 2004 1591 1597 (Pubitemid 41184389)
7. P. Begat, D. Morton, J. Staniforth, and R. Price The cohesive-adhesive balances in dry powder inhaler formulations. II. Influence on fine particle delivery characteristics Pharm. Res. 21 2004 1826 1833 (Pubitemid 39390095)
8. K. Brodka-Pfeiffer, P. Langguth, P. Grass, and H. Hausler Influence of mechanical activation on the physical stability of salbutamol sulphate Eur. J. Pharm. Biopharm. 56 2003 393 400 (Pubitemid 37346513)
9. V. Chikhalia, R. Forbes, R. Storey, and M. Ticehurst The effect of crystal morphology and mill type on milling induced crystal disorder Eur. J. Pharm. Sci. 27 2006 19 26 (Pubitemid 41728251)
10. M. Davies, A. Brindley, X. Chen, M. Marlow, S. Doughty, I. Shrubb, and C. Roberts Characterization of drug particle surface energetics and Young's modulus by atomic force microscopy and inverse gas chromatography Pharm. Res. 22 2005 1158 1166 (Pubitemid 41127074)
11. O. de Vegt, H. Vromans, J. den Toonder, and K. van der Voort Maarschalk Influence of flaws and crystal properties on particle fracture in a jet mill Powder Technol. 191 2009 72 77
12. J. Fraxedas, S. Garcia-Manyes, P. Gorostiza, and F. Sanz Nanoindentation: toward the sensing of atomic interaction Proc. Natl. Acad. Sci. U.S.A. 99 2002 5228 5232 (Pubitemid 34411530)
13. H. Garekani, F. Sadeghi, A. Badiee, S. Mostafa, and A. Rajabi-Siahboomi Crystal habit modifications of ibuprofen and their physicomechanical characteristics Drug Dev. Ind. Pharm. 27 2001 803 809 (Pubitemid 33029505)
14. H. Hertz Ueber die Berührung fester elastischer Körper (on the contact of elastic solids) J. Reine Angew. Math. 92 1881 156 171
15. J.C. Hooton, C.S. German, S. Allen, M.C. Davies, C.J. Roberts, S.J.B. Tendler, and P.M. Williams An atomic force microscopy study of the effect of nanoscale contact geometry and surface chemistry on the adhesion of pharmaceutical particles Pharm. Res. 21 2004 953 961 (Pubitemid 38870144)
16. J.C. Hooton, M.D. Jones, and R. Price Predicting the behavior of novel sugar carriers for dry powder inhaler formulations via the use of a cohesive-adhesive force balance approach J. Pharm. Sci. 95 2006 1288 1297 (Pubitemid 43874442)
17. J.C. Hooton, M.D. Jones, H. Harris, J. Shur, and R. Price The influence of crystal habit on the prediction of dry powder inhalation formulation performance using the cohesive-adhesive force balance approach Drug Dev. Ind. Pharm. 34 2008 974 983
18. J. Hutter, and J. Bechhoefer Calibration of atomic force microscope tips Rev. Sci. Instrum. 64 1993 1868 1873
19. R. Hüttenrauch, S. Fricke, and P. Zielke Mechanical activation of pharmaceutical systems Pharm. Res. 2 1985 302 306 (Pubitemid 16193203)
20. M.D. Jones, P.M. Young, D. Traini, J. Shur, S. Edge, and R. Price The use of atomic force microscopy to study the conditioning of micronised budesonide Int. J. Pharm. 357 2008 314 317
21. M.D. Jones, H. Harris, J.C. Hooton, J. Shur, G.S. King, C.A. Mathoulin, K. Nichol, T.L. Smith, M.L. Dawson, T.L. Smith, M.L. Dawson, A.R. Ferrie, and R. Price An investigation into the relationship between carrier-based dry powder inhalation performance and formulation cohesive-adhesive force balances Eur. J. Pharm. Biopharm. 69 2008 496 507
22. X. Liao, and T. Wiedmann Characterization of pharmaceutical solids by scanning probe microscopy J. Pharm. Sci. 93 2004 2250 2258 (Pubitemid 39129623)
23. D. Murnane, C. Marriott, and G.P. Martin Crystallization and crystallinity of fluticasone propionate Cryst. Growth Des. 8 2008 2753 2764
24. D. Murnane, G.P. Martin, and C. Marriott Dry powder formulations for inhalation of fluticasone propionate and salmeterol xinafoate microcrystals J. Pharm. Sci. 98 2009 503 515
25. T.H. Muster, and C.A. Prestidge Face specific surface properties of pharmaceutical crystals J. Pharm. Sci. 91 2002 1432 1444 (Pubitemid 34633959)
26. S. Newman Evolution of dry powder inhaler design, formulation, and performance Respir. Med. 96 2002 293 304
27. M.C. Perkins, M. Bunker, J. James, S. Rigby-Singleton, J. Ledru, C. Madden-Smith, S. Luk, N. Patel, and C.J. Roberts Towards the understanding and prediction of material changes during micronisation using atomic force microscopy Eur. J. Pharm. Sci. 38 2009 1 8
28. M. Perkins, S.J. Ebbens, S. Hayes, C.J. Roberts, C.E. Madden, S.Y. Luk, and N. Patel Elastic modulus measurements from individual lactose particles using atomic force microscopy Int. J. Pharm. 332 2007 168 175
29. C. Plassard, E. Lesniewska, I. Pochard, and A. Nonat Investigation of the surface structure and elastic properties of calcium silicate hydrates at the nanoscale Ultramicroscopy 100 2004 331 338 (Pubitemid 38834142)
30. J.E. Sader, I. Larson, P. Mulvaney, and L.R. White Method for the calibration of atomic force microscope cantilevers Rev. Sci. Instrum. 66 1995 3789
31. L. Taylor, D. Papadopoulos, P. Dunn, A. Bentham, J. Mitchell, and M. Snowden Mechanical characterisation of powders using nanoindentation Powder Technol. 143 2004 179 185 (Pubitemid 39091938)
32. M.J. Telko, and A.J. Hickey Dry powder inhaler formulation Respir. Care 50 2005 1209 1227 (Pubitemid 46187575)
33. C. Thompson, M.C. Davies, C.J. Roberts, S.J.B. Tendler, and M.J. Wilkinson The effects of additives on the growth and morphology of paracetamol (acetaminophen) crystals Int. J. Pharm. 280 2004 137 150 (Pubitemid 38950911)
34. M. Timsina, G. Martin, C. Marriott, D. Ganderton, and M. Yianneskis Drug-delivery to the respiratory-tract using dry powder inhalers Int J. Pharm. 101 1994 1 13
35. S. Velaga, R. Berger, and J. Carlfors Supercritical fluids crystallization of budesonide and flunisolide Pharm. Res. 19 2002 1564 1571 (Pubitemid 35266564)
36. J.F. Willart, and M. Descamps Solid state amorphization of pharmaceuticals Mol. Pharm. 5 2008 905 920
37. W. Wood A bad (crystal) habit - and how it was overcome Powder Technol. 121 2001 53 59 (Pubitemid 33033159)
38. P.M. Young, M.J. Tobyn, R. Price, M. Buttrum, and F. Dey The use of colloid probe microscopy to predict aerosolization performance in dry powder inhalers: AFM and in vitro correlation J. Pharm. Sci. 95 2006 1800 1809 (Pubitemid 44229586)
39. S. Zugner, K. Marquardt, and I. Zimmermann Influence of nanomechanical crystal properties on the comminution process of particulate solids in spiral jet mills Eur. J. Pharm. Biopharm. 62 2006 194 201 (Pubitemid 43143272)