Recycling potential of unbleached and bleached chemical pulps from juvenile and mature wood of Populus deltoides

Holzforschung

Volumn 66, Issue 2, 2012, Pages 155-161

  Hamzeh, Yahya ^a   Najafi, Seyed Mohammad Hashemi ^a   Hubbe, Martin A ^b   Salehi, Kamyar ^c   Firouzabadi, Mohammad Reza Dehghani ^d  

^a UNIVERSITY OF TEHRAN   (Iran)

^b NORTH CAROLINA STATE UNIVERSITY   (United States)

^c RESEARCH INSTITUTE OF FORESTS AND RANGELANDS   (Iran)

^d GORGAN UNIVERSITY OF AGRICULTURAL SCIENCES AND NATURAL RESOURCES   (Iran)

Author keywords

bleaching; hornification; juvenile wood; kraft pulping; mature wood; Populus deltoides; recycling

Indexed keywords

BLEACHED CHEMICAL PULPS; BLEACHING CHEMICALS; HAND SHEETS; HIGH YIELD; HORNIFICATION; JUVENILE WOODS; LOSS RATES; LOW-YIELD; MATURE WOOD; MORPHOLOGICAL CHARACTERISTIC; MORPHOLOGICAL PROPERTIES; POPULUS DELTOIDES; RE-WETTING; RECYCLING CYCLE; RECYCLING POTENTIAL; STRENGTH LOSS; TRANSITION WOODS;

BLEACHED PULP; BLEACHING; CHEMICAL PULP; CLEANING; KRAFT PROCESS; KRAFT PULP; RECYCLING;

WOOD;

BLEACHED PULPS; BLEACHING; CHEMICAL PULPS; CLEANING; HORNIFICATION; JUVENILE WOOD; KRAFT PULPING; MATURE WOOD; POPULUS DELTOIDES; RECYCLING; WOOD;

POPULUS; POPULUS DELTOIDES;

EID: 84860645700     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2011.141     Document Type: Article

References (47)

1. Ai, J., Tschirner, U. (2010) Fiber length and pulping characteristics of switchgrass, alfalfa stems, hybrid poplar and willow biomasses. Biores. Technol. 101:215-221.
2. Balakshin, M.Y., Capanema, E.A., Goldfarb, B., Frampton, J., Kadla, J.F. (2005) NMR studies on Fraser fir Abies fraseri (Pursh). Poir. lignins. Holzforschung 59:488-496.
3. Bao, F.C., Jiang, Z.H., Jiang, X.M., Lu, X.X., Luo, X.Q., Zhang, S.Y. (2001) Differences in wood properties between juvenile wood and mature wood in 10 species grown in China. Wood Sci. Technol. 35:363-375.
4. Bose, S.K., Francis, R.C., Govender, M., Bush, T., Spark, A. (2009). Lignin content versus syringyl to guaiacyl ratio amongst poplars. Biores. Technol. 100:1628-1633.
5. Chen, Y., Wang, Y., Wan, J., Ma, Y. (2010) Crystal and pore structure of wheat straw cellulose fiber during recycling. Cellulose 17:329-338.
6. Claramunt, J., Ardanuy, M., Garcia-Hortal, J.A. (2010) Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood fibres for reinforcement of cementitious composites. Carb. Poly. 79:200-205.
7. Dai, Q., Jameel, H., Chang, H.-M., Kadla, J.F. (2004) Bleachability of kraft pulps from earlywood and latewood of fast-growing loblolly pine. J. Wood Chem. Technol. 24:357-370.
8. Dang, Z., Elder, T., Hsieh, J.S., Ragauskas, A.J. (2007) Alkaline peroxide treatment of ECF bleached softwood kraft pulps: Part 2. Effect of increased fiber charge on refining, wet-end application, and hornification. Holzforschung 61:451-458.
9. DeMartini, J.D., Wyman, C.E. (2011) Changes in composition and sugar release across the annual rings of Populus wood and implications on recalcitrance. Biores. Technol. 102:1352-1358.
10. Enayati, A.A., Hamzeh, Y., Mirshokraie, S.A., Molaii, M. (2009). Papermaking potential of canola stalks. BioRes. 4:245-256.
11. Esteban, L.G., de Palacios, P., García Fernández, F., Guindeo, A., Conde, M., Baonza, V. (2008) Sorption and thermodynamic properties of juvenile Pinus sylvestris L. wood after 103 years of submersion. Holzforschung 62:745-751.
12. Fernando, D., Rosenberg, P., Persson, E., Daniel, G. (2007) Ultrastructural aspects of fibre development during the stone groundwood process: new insights into derived pulp properties. Holzforschung 61:532-538.
13. Francis, R.C., Brown, A.F., Hanna, R.B., Kamdem, D.P. (2004) The DN 30 hybrid poplar - a fiber source for high strength hardwood pulps. Tappi 3:3-7.
14. Francis, R.C., Hanna, R.B., Shin, S.-J., Brown, A.F., Riemenschneider, D.E. (2006) Papermaking characteristics of three populus clones grown in the northcentral United States. Biom. Bioener. F30:803-808.
15. Hamzeh, Y., Benattar, N., Mortha, G., Calais, C. (2007) Modified ECF bleaching sequences optimizing the use of chlorine dioxide. Appita 60:150-155.
16. Hardell, H.-L., Leary, G., Stoll, M., Westermark, U. (1980) Variations in lignin structure in defined morphological parts of spruce. Svensk Pap. 83:44-49.
17. Hubbe, M.A., Venditti, R.A., Barbour, R.L., Zhang, M. (2003). Changes to unbleached kraft fibers due to drying and recycling. Prog. Paper Recycling 12:11-20.
18. Hubbe, M.A., Venditti, R.A., Rojas, O.J. (2007) What happens to cellulosic fibers during papermaking and recycling? A review. BioRes. 2:739-788.
19. Kibblewhite, R.P., Suckling, I.D., Evans, R., Grace, J.C., Riddell, M.J.C. (2010) Lignin and carbohydrate variation with earlywood, latewood, and compression wood content of bent and straight ramets of a radiata pine clone. Holzforschung 64:101-109.
20. Köhnke, T., Lund, K., Brelid, H., Westman, G. (2010) Kraft pulp hornification: a closer look at the preventive effect gained by glucuronoxylan adsorption. Carb. Poly. 81:226-233.
21. Kojima, M., Yamamoto, H., Yoshida, M., Ojio, Y., Okumura, K. (2009) Maturation property of fast-growing hardwood plantation species: a view of fiber length. For. Ecol. Manage. 257:15-22.
22. Kontturi, E., Vuorinen, T. (2009) Indirect evidence of supramolecular changes within cellulose microfibrils of chemical pulp fibers upon drying. Cellulose 16:65-74.
23. Lachenal, D., Fernandes, J.C., Froment, P. (1995) Behavior of residual lignin in kraft pulp during bleaching. J. Pulp Pap. Sci. 21: J173-J177.
24. Laivins, G.V., Scallan, A.M. (1993) The mechanism of hornification of wood pulps. Products of Papermaking, 10th Fundamental Res. Symp., Vol. 2, Oxford, pp. 1235-1260.
25. Leppänen, K., Bjurhager, I., Peura, M., Kallonen, A., Suuronen, J.-P., Penttilä, P., Love, J., Fagerstedt, K., Serimaa, R. (2011). X-ray scattering and microtomography study on the structural changes of never-dried silver birch, European aspen and hybrid aspen during drying. Holzforschung 65:865-873.
26. Mäkinen, H., Jyske, T., Saranpää, P. (2008) Variation of tracheid length within annual rings of Scots pine and Norway spruce. Holzforschung 62:123-128.
27. Mancosky, D.G., Lucia, L.A. (2001) Use of TOF-SIMS for the analysis of surface metals in H2O2-bleached lignocellulosic fibers. Pure Appl. Chem. 73:2047-2058.
28. Mansfield, S.D., Parish, R., Di Lucca, C.M., Goudie, J., Kang, K.-Y., Ott, P. (2009) Revisiting the transition between juvenile and mature wood: a comparison of fibre length, microfibril angle and relative wood density in lodgepole pine. Holzforschung 63:449-456.
29. Myers, G.C. (2002) Thermomechanical pulping of loblolly pine juvenile wood. Wood Fiber Sci. 34:108-115.
30. Myers, G.C., Arola, R.A., Horn, R.A., Wegner, T.H. (1996) Chemical and mechanical pulping of aspen chunkwood, mature wood, and juvenile wood. Tappi 79:161-168.
31. Nazhad, M.M. (2005) Recycled fiber quality - a review. J. Ind. Eng. Chem. 11:314-329.
32. Oksanen, T., Buchert, J., Viikari, L. (1997) The role of hemicelluloses in the hornification of bleached kraft pulps. Holzforschung 51:355-360.
33. Orsler, R.J., Newman, P.L., Laidlaw, R.A. (1972) Pulping of Britishgrown softwoods. Pt. VIII. A study of juvenile, mature, and top wood in a large scots pine tree. Holzforschung 26:173-180.
34. Peszlén, I. (1994) Influence of age on selected anatomical properties of Populus clones. IAWA 15:311-321.
35. Shi, J.L., Zhang, S.Y., Riedl, B. (2005) Effect of juvenile wood on strength properties and dimensional stability of black spruce medium-density fiberboard panels. Holzforschung 59:1-9.
36. Song, X., Law, K.-N. (2010) Kraft pulp oxidation and its influence on recycling characteristics of fibres. Cellulose Chem. Technol. F44:265-270.
37. Stone, J.E., Scallan, A.M. (1966) Influence of drying on the pore structures of the cell wall, in Consolidation of the Paper Web, Trans. Symp. Cambridge, Tech. Sec. British Paper and Board Makers' Assoc. Inc, London, Vol. 1, pp. 145-174.
38. Suchy, M., Virtanen, J., Kontturi, E., Vuorinen, T. (2009) Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy. Biomacromolecules 11: 515-520.
39. Suchy, M., Kontturi, E., Vuorinen, T. (2010) Impact of drying on wood ultrastructure: similarities in cell wall alteration between native wood and isolated wood-based fibers. Biomacromolecules 11:2161-2168.
40. Sutjipto, E.R., Li, K., Pongpattanasuegsa, S., Nazhad, M.M. (2008). Effect of recycling on paper properties. Tappsa Jan:19-23.
41. Taghiyari, H.R., Karimi, A.N., Parsapajouh, D., Pourtahmasi, K. (2010) Study on the longitudinal gas permeability of juvenile wood and mature wood. Spec. Topic. Rev Poro. Med. 1:31-38.
42. Tschirner, U., Barsness, J., Keeler, T. (2007) Recycling of chemical pulp from wheat straw and corn stover. BioRes. 2:536-543.
43. Wan, J.Q., Wang, Y., Xiao, Q. (2010) Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Biores. Technol. 101:4577-4583.
44. Weight, S.W., Yadama, V. (2008) Manufacture of laminated strand veneer (LSV) composite. Part 1: optimization and characterization of thin strand veneers. Holzforschung 62:718-724.
45. Yeh, T.-F., Goldfarb, B., Chang, H.-M., Peszlén, I., Braun, J.L., Kadla, J.F. (2005) Comparison of morphological and chemical properties between juvenile wood and compression wood of loblolly pine. Holzforschung 59:669-674.
46. Yeh, T.-F., Braun, J.L., Goldfarb, B., Chang, H.-M., Kadla, J.F. (2006) Morphological and chemical variations between juvenile wood, mature wood, and compression wood of loblolly pine (Pinus taeda L.). Holzforschung 60:1-8.
47. Yildiz, S., Gumus-kaya, E. (2007) The effects of thermal modification on crystalline structure of cellulose in soft and hardwood. Build. Environ. 42:62-67.