Alkaline peroxide treatment of ECF bleached softwood kraft pulps: Part 2. Effect of increased fiber charge on refining, wet-end application, and hornification

Holzforschung

Volumn 61, Issue 4, 2007, Pages 451-458

  Dang, Zheng ^a   Elder, Thomas ^b   Hsieh, Jeffery S ^a   Ragauskas, Arthur J ^c  

^a Georgia Institute of Technology   (United States)

^b USDA FOREST SERVICE   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Atomic force microscopy; Carboxyl; Cationic starch; Drying; Fiber charge; Hornification; Peroxide; Refining; Tensile; Wet end

Indexed keywords

ATOMIC FORCE MICROSCOPY; BLEACHED PULP; NATURAL FIBERS; PEROXIDES; SOFTWOODS;

ALKALINE PEROXIDES; CARBOXYL; FIBER CHARGE;

KRAFT PULP;

ALKALINE PEROXIDE MECHANICAL PULPING; BLEACHED PULPS; CATIONIC COMPOUNDS; DRYING; HORNIFICATION; KRAFT PULPS; NATURAL FIBERS; PEROXIDES; REFINING; SOFTWOODS;

EID: 34250340160     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2007.071     Document Type: Article

References (55)

1. Barzyk, D., Page, D.H., Ragauskas, A.J. (1997) Acidic group topochemistry and fiber-to-fiber specific bond strength. J. Pulp Pap. Sci. 23:59-61.
2. Batchelor, W.J., Kure, K.-A., Ouellet, D. (1999) Refining and the development of fibre properties. Nord. Pulp Pap. Res. J. 14:285-291.
3. Bhardwaj, N.K., Duong, T.D., Nguyen, K.L. (2004) Pulp charge determination by different methods: effect of beating/refining. Colloids Surf. A. 236:39-44.
4. Bhardwaj, N.K., Hoang, V., Nguyen, K.L. (2007) A comparative study of the effect of refining on physical and electrokinetics properties of various cellulosic fibres. Bioresour. Technol. 98:1647-1654.
5. Bobacka, V., Näsman, J., Kreutzman, N., Eklund, D. (1999) Adsorption of cationic starch onto peroxide-bleached TMP fibres - influence of interfering wood substances. Pap. Puu 81:59-62.
6. Carrasco, F., Mutjé, P., Pèlach, M.A. (1996) Refining of bleached cellulosic pulps: characterization by application of the colloidal titration technique. Wood Sci. Technol. 30:227-236.
7. Dang, Z., Elder, T., Ragauskas, A.J. (2006) Influence of kraft pulping on carboxylate content of softwood kraft pulps. Ind. Eng. Chem. Res. 45:4509-4516.
8. Dang, Z., Elder, T., Ragauskas, A.J. (2007) Alkaline peroxide treatment of ECF bleached softwood kraft pulps Part 1. Characterizing the effect of alkaline peroxide treatment on carboxyl groups of fibers. Holzforschung 61:445-450.
9. Eriksson, M., Pettersson, G., Wågberg, L., Eriksson, M. (2005) Application of polymeric multilayers of starch onto wood fibres to enhance strength properties of paper. Nord. Pulp Pap. Res. J. 20:270-276.
10. Fardim, P., Duran, N. (2003) Modification of fibre surfaces during pulping and refining as analysed by SEM, XPS and ToF-SIMS. Colloids Surf. A 223:263-276.
11. Fernandes Diniz, J.M.B., Gil, M.H., Castro, J.A.A.M. (2004) Hornification - its origin and interpretation in wood pulps. Wood Sci. Technol. 37:489-494.
12. Gaiolas, C., Costa, A.P., Silva, M.S., Belgacem, M.N. (2004) Adsorption of cationic starch on typical furnishes used in the Portuguese paper industry. Appita J. 57:112-115.
13. Gaiolas, C., Mendes, P., Silva, M.S., Costa, A.P., Belgacem,M.N. (2005) The role of cationic starch in carbonate-filled papers. Appita J. 58:282-287.
14. Gardlund, L., Wågberg, L., Gernandt, R. (2003) Polyelectrolyte complexes for surface modification of wood fibres: II. Influence of complexes on wet and dry strength of paper. Colloids Surf. A 218:137-149.
15. Hietanen, S., Ebeling, K. (1990) Fundamental aspects of the refining process. Pap. Puu 72:158-170.
16. Hiltunen, E., Laine, J.E., Paulapuro, H. (1999) Effect of fiber charge on refining of softwood kraft pulp. In: Proceedings of the PTS Symposium (Papierfaserstoff-Technik/Pulp Technology), München, Germany. pp. 19E, 19/1-19/10.
17. Hubbe, M.A. (2007) Mini-encyclopedia of papermaking wet-end chemistry. http://www4.ncsu.edu/~hubbe/STCH.htm.
18. Isogai, A., Kitaoka, C., Onabe, F. (1997) Effects of carboxyl groups in pulp on retention of alkylketene dimer. J. Pulp Pap. Sci. 23:215-219.
19. Jordan, B.D., Page, D.H. (1979) Application of image analysis to pulp fiber characterization. In: Proceedings of the International Paper Physics Conference, Harrison Hot Springs, BC. CPPA, Montreal. pp. 105-114.
20. Kato, K.L., Cameron, R.E. (1999) A review of the relationship between thermally-accelerated ageing of paper and hornification. Cellulose 6:23-40.
21. Katz, S., Beatson, R.P., Scallan, A.M. (1984) The determination of strong and weak acidic groups in sulfite pulps. Sven. Papperstidn. 6:R48-R53.
22. Khalandovskii, I.N., Laptev, L.N., Trukhtenkova, N.E. (1971) Beating of hardwood pulp at high consistency. Bumazhnaia Promyshlennost 6:5-7.
23. Kitaoka, T., Isogai, A., Onabe, F. (1999) Chemical modification of pulp fibers by TEMPO-mediated oxidation. Nord. Pulp Pap. Res. J. 14:279-284.
24. Krupin, V.I. (2005) Interaction of cationic starch with paper stock. Tselliuloza Bumaga Karton/Pulp Paper Board 4:62-96.
25. Laine, J., Lindström, T., Nordmark, G.G., Risinger, G. (2000) Studies on topochemical modification of cellulosic fibres. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibres. Nord. Pulp Pap. Res. J. 15: 520-526.
26. Laine, J., Lindstrom, T., Bremberg, C., Glad-Nordmark, G. (2003a) Studies on topochemical modification of cellulosic fibres. Part 5. Comparison of the effects of surface and bulk chemical modification and beating of pulp on paper properties. Nord. Pulp Pap. Res. J. 18:325-332.
27. Laine, J., Lindström, T., Bremberg, C., Glad-Nordmark, G. (2003b) Studies on topochemical modification of cellulosic fibres. Part 4. Toposelectivity of carboxymethylation and its effects on the swelling of fibres. Nord. Pulp Pap. Res. J. 18: 316-324.
28. Le Roux, J., Daneault, C., Chabot, B. (2005) Chemical modification of TMP pulp to improve filler retention. In: Proceedings of the 59th Appita Annual Conference and Exhibition, incorporating the 13th ISWFPC International Symposium on Wood, Fibre and Pulping Chemistry, Auckland, New Zealand. pp. 227-231.
29. Li, H., Du, Y., Xu, Y., Zhan, H., Kennedy, J.F. (2004) Interactions of cationized chitosan with components in a chemical pulp suspension. Carbohydr. Polym. 58:205-214.
30. Lindström, T., Carlsson, G. (1982) The effect of carboxyl groups and their ionic form during drying on the hornification of cellulose fibers. Sven. Papperstidn. 85:R146-R151.
31. Liu, X.D., Nishi, N., Tokura, S., Sakairi, N. (2001) Chitosan coated cotton fiber: Preparation and physical properties. Carbohydr. Polym. 44:233-238.
32. Lloyd, J.A., Horne, C.W. (1993) The determination of fibre charge and acidic groups of radiata pine pulps. Nord. Pulp Pap. Res. J. 1:61-67.
33. Maloney, T.C., Paulapuro, H. (2000) The effect of drying conditions on the swelling and bonding properties of bleached kraft hardwood pulp. In: Proceedings of the 54th Appita Annual Conference Proceedings. pp. 41-46.
34. Maximova, N., Laine, J., Stenius, P., Maximova, N. (2005) Adsorption of lignin-cationic starch complexes on cellulose fibres and their effect on sheet properties. Pap. Puu 87: 176-182.
35. Miller, P.R. (1989) Fiber and sheet properties resulting from refining stock concentration variation. Appita J. 42:125-130.
36. Nanko, H. (2003) Bond strength enhancement mechanisms of cationic starch and cationic polyacrylamide. In: Proceedings of the International Paper Physics Conference, Victoria, BC, Canada. TAPPI Press. pp. 127-136.
37. Paavilainen, L. (1994) Bonding potential of softwood sulfate wkraftx pulp fibers. Pap. Puu 76:162-173.
38. Page, D.H., Barbe, M.C., Seth, R.S., Jordan, B.D. (1983) Mechanism of curl creation, removal and retention in pulp fibers. In: Proceedings of the TAPPI International Mechanical Pulping Conference, Washington, DC. pp. 271-275.
39. Page, D.H. (1989) Beating of chemical pulps - action and the effects. In: Transactions of the 9th Fundamental Research Symposium, Cambridge. pp. 1-38.
40. Robertsen, L., Joutsimo, O. (2005) The effect of mechanical treatment on kraft pulps produced from different softwood raw materials. Pap. Puu 87:111-115.
41. Sanders, N.D., Schaefer, J.H. (1995) Comparing papermaking wet-end charge-measuring techniques in kraft and groundwood systems. Tappi J. 78:142-150.
42. Schmidt, J.A., Kimura, F., Gray, D.G. (1995) IR and UV spectroscopic study of borohydride-reduced mechanical pulp during monochromatic and wide-band irradiation. In: Proceedings of the 8th International Symposium on Wood and Pulping Chemistry, Helsinki, Finland. pp. 443-450.
43. Seo, Y.B., Choi, C., Jeon, Y. (2003) Effect of mechanical pretreatment on fibre properties. Appita J. 56:371-375.
44. Sjoberg, J.C., Hoglund, H. (2005) Refining systems for sack paper pulp: Part I. HC refining under pressurised conditions and subsequent LC refining. Nord. Pulp Pap. Res. J. 20:320-328.
45. Stanciu, C. (2005) Use of cationic starch to produce 100% secondary fibre-based fluting. Papiripar 49:102-106.
46. Tappi standard (1992) T205. om-88, Forming handsheets for physical tests of pulp.
47. Tappi standard (1992) T227. om-92, Freeness of pulp.
48. Tappi standard (1992) T248. cm-85, Laboratory beating of pulp (PFI mill method).
49. Tappi standard (1992) T403. om-91, Bursting strength of paper.
50. Tappi standard (1992) T494. om-88, Tensile breaking properties of paper and paperboard (using constant rate of elongation apparatus).
51. Wågberg, L., Odberg, L., Glad-Nordmark, G. (1989) Charge determination of porous substrates by polyelectrolyte adsorption. Nord. Pulp Pap. Res. J. 2:71-76.
52. Wang, X., Maloney, T.C., Paulapuro, H. (2003) Internal fibrillation in never-dried and once-dried chemical pulps. Appita J. 56:455-459.
53. Wang, X., Maloney, T.C., Paulapuro, H. (2006) Improving the properties of never-dried chemical pulp by pressing before refining. Nord. Pulp Pap. Res. J. 21:135-139.
54. Yan, Z., Liu, Q., Deng, Y., Ragauskas, A. (2005) Improvement of paper strength with starch modified clay. J. Appl. Polym. Sci. 97:44-50.
55. Zhou, Q., Baumann, M.J., Brumer, H., Teeri, T.T. (2006) The influence of surface chemical composition on the adsorption of xyloglucan to chemical and mechanical pulps. Carbohydr. Polym. 63:449-458.