Validation of a model for static and dynamic recrystallization in metals

International Journal of Plasticity

Volumn 32-33, Issue , 2012, Pages 17-35

  Brown, Arthur A ^a   Bammann, Douglas J ^b  

^a SANDIA NATIONAL LABORATORIES   (United States)

^b MISSISSIPPI STATE UNIVERSITY   (United States)

Author keywords

A. Dislocations; A. Microstructures; B. Constitutive behavior; B. Elastic viscoplastic material; Misorientation nominated

Indexed keywords

AVERAGE STRESS; COMPRESSION TESTS; CONSTITUTIVE BEHAVIORS; DISLOCATION DENSITIES; ELASTIC-VISCOPLASTIC MATERIAL; INTERNAL STATE VARIABLES; MATERIAL PARAMETER; MIS-ORIENTATION; MULTIPLE PEAK DYNAMIC RECRYSTALLIZATION; MULTIPLE-PEAK; PARAMETER SET; PHENOMENOLOGICAL PLASTICITY; RULE OF MIXTURE; SOFTENING BEHAVIOR; STATE VARIABLES; STATIC RECRYSTALLIZATION; SUBGRAIN BOUNDARIES;

BEHAVIORAL RESEARCH; COMPRESSION TESTING; DYNAMIC RECRYSTALLIZATION;

LOADING;

EID: 84857912023     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.12.006     Document Type: Article

References (57)

1. M.F. Ashby The deformation of plastically non-homogeneous materials Philos. Mag. 21 1970 399 424
2. M.J. Avrami Kinetics of phase change Chem. Phys. 7 1939 1103 1109
3. J.E. Bailey, and P.B. Hirsch The recrystallization process in some polycrystalline metals Proc. Roy. Soc. A267 1962 11 30
4. D.J. Bammann A model of crystal plasticity containing a natural length scale Mater. Sci. Eng. A309-310 2001 406 410 (Pubitemid 32541031)
5. Bammann, D.J., Chiesa, M.L., Johnson, G.C., 1995. A state variable model for temperature and strain rate dependent metals. In: Rajendran, A.M., Batra, R.C. (Eds.), Constitutive Laws: Experiments and Numerical Implementation. CIMNE, pp. 84-97
6. D.J. Bammann, M.L. Chiesa, and G.C. Johnson Modeling large deformation and failure in manufacturing processes T. Tatsumi, E. Watanabe, T. Kambe, Theoretical and Applied Mechanics 1996 ICTAM 359 376
7. E.P. Busso A continuum theory for dynamic recrystallization with microstructure-related length scales Int. J. Plant 14 1998 319 353 (Pubitemid 128458126)
8. J.W. Cahn, and W. Hagel Theory of the pearlite reaction Z.D. Zackay, H.I. Aaronson, Decomposition of Austenite by Diffusional Processes 1960 Interscience 131 196
9. J.C. Casey, and P.M. Naghdi A prescription for the identification of finite plastic strain Int. J. Eng. Sci. 30 10 1992 1257 1278
10. S.P. Chen, I. Todd, and S. van der Zwaag Modeling the kinetics of grain-boundary-nucleated recrystallization processes after cold deformation Metall. Mater. Trans. A 33 3 2002 529 537
11. M.L. Chiesa, A.A. Brown, B.R. Antoun, J.T. Ostien, R.A. Regueiro, D.J. Bammann, and N.Y. Yang Prediction of final material state in multi-stage forging processes AIP Conf. Proc. 712 2004 510 515 pt. 1
12. B.D. Coleman, and M.E. Gurtin Thermodynamics with internal state variables J. Chem. Phys. 47 1967 597 613
13. B.D. Coleman, and W. Noll The thermodynamics of elastic materials with heat conduction and viscosity Arch. Ration. Mech. Anal. 13 1963 167 178
14. R.D. Doherty Primary recrystallization R.W. Cahn, Encyclopedia of Materials: Science and Technology 2005 Elsevier 7847 7850
15. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett Current issues in recrystallization: a review Mater. Sci. Eng. A238 1997 219 274 (Pubitemid 127437245)
16. Y. Estrin, and H. Mecking A unified phenomenological description of work hardening and creep based on one-parameter models Acta Metall. 32 1 1984 57 70 (Pubitemid 14509217)
17. X.G. Fan, and H. Yang Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution Int. J. Plant 27 2011 1833 1852
18. N. Fox On the continuum theories of dislocations and plasticity Q. J. Mech. Appl. Math. 21 1968 67 75
19. H.J. Frost, and M.F. Ashby Deformation-Mechanism Maps 1982 Pergamon Press New York
20. T. Furu, R. Orsund, and E. Nes Subgrain growth in heavily deformed aluminium - experimental investigation and modelling treatment Acta Metall. Mater. 43 6 1995 2209 2232
21. G. Gottstein Physikalische Grundlagen der Metallkunde second ed. 2001 Springer Berlin/Heidelberg, Germany
22. F. Haessner Recrystallization of Metallic Materials second ed. 1978 Rieder-Verlag Stuttgart
23. E.A. Holm, M.A. Miodownik, and A.D. Rollett On abnormal subgrain growth and the origin of recrystallization nuclei Acta Mater. 51 2003 2701 2716
24. Y. Huang, and F.J. Humphreys Measurements of grain boundary mobility during recrystallization in a single-phase aluminium alloy Acta Mater. 47 1999 2259 2271
25. Y. Huang, and F.J. Humphreys Subgrain growth and low angle boundary mobility in aluminum crystals of orientation {1 1 0}〈0 0 1〉 Acta Mater. 48 2000 2017 2030
26. D.A. Hughes, and N. Hansen Microstructure and strength of nickel at large strains Acta Mater. 48 2000 2985 3004
27. D.A. Hughes, Q. Liu, C.C. Chrzan, and N. Hansen Scaling of microstructural parameters: misorientation of deformation-induced boundaries Acta Mater. 45 1 1997 105 112 (Pubitemid 127413961)
28. F.J. Humphreys, and M. Hatherly Recrystallization and Related Annealing Phenomena 1995 Pergamon Press Oxford
29. W.A. Johnson, and R.F. Mehl Reaction kinetics in processes of nucleation and growth Trans. Am. Inst. Min. Eng. 135 1939 416 430
30. U.F. Kocks, and H. Mecking A mechanism for static and dynamic recovery P. Haasen, V. Gerold, G. Kostorz, Strength of Metals and Alloys 1979 Pergamon Press Oxford 345 350
31. U.F. Kocks, A.S. Argon, and M.F. Ashby The thermodynamics and kinetics of slip Prog. Mater. Sci. 19 1975 1 291
32. S. Kok, A.J. Beaudoin, and D.A. Tortorelli On the development of stage IV hardening using a model based on the mechanical threshold Acta Mater. 50 2002 1653 1667 (Pubitemid 34254712)
33. A.E. Kolmogorov On the statistical theory of metal crystallization Izv. Akad. Nauk SSSR, Ser. Mat. 3 1937 355 359
34. E. Kröner Allgemeine kontinuumstheorie derivative versetzungen and eigenspannungen Arch. Ration. Mech. Anal. 4 1960 273 334
35. Lathrop, J.F., 1997. BFIT - a program to analyze and fit the BCJ model parameters to experimental data - tutorial and user's guide. Sandia National Laboratories report SAND97-8218.
36. H.M. Ledbetter, and E.R. Naimon Elastic properties of metals and alloys. II. Copper J. Phys. Chem. Ref. Data 3 1974 897 935
37. E.H. Lee Elastic-plastic deformation at finite strains ASME J. Appl. Mech. 36 1969 1 6
38. E.H. Lee, and D.T. Liu Finite-strain elastic-plastic theory with application to plane-wave analysis J. Appl. Phys. 38 1967 19 27
39. M.J. Luton, and C.M. Sellars Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation Acta Metall. 17 1969 1033 1043
40. J. Mandel Thermodynamics and plasticity J.J. Delgado, Foundations of Continuum Thermodynamics 1974 Macmillan New York 283 304
41. A. Manonukul, and F.P.E. Dunne A model for the initiation of dynamic recrystallization in two-phase materials Phil. Mag. 79 1999 113 132 (Pubitemid 129533713)
42. Marin, E.B., Bammann, D.J., Regueiro, R.A., Johnson, G.C., 2006. On the formulation, parameter identification and numerical integration of the EMMI model: plasticity and isotropic damage. Sandia National Laboratories report SAND2006-0200.
43. H.J. McQueen, and J.J. Jonas Recovery and recrystallization during high temperature deformation R.J. Arsenault, Plastic Deformation of Materials vol. 6 1975 Academic Press New York 393 493
44. M. Pietrzyk Through-process modeling of microstructure evolution in hot forming of steels J. Mater. Proc. Tech. 2002 53 62 (Pubitemid 34991918)
45. V.C. Prantil, J.T. Jenkins, and P.R. Dawson An analysis of texture and plastic spin for planar polycrystals J. Mech. Phys. Solids 41 1993 1357 1382
46. R.A. Regueiro, D.J. Bammann, E.B. Marin, and K. Garikipati A nonlocal phenomenological anisotropic finite deformation plasticity model accounting for dislocation defects J. Eng. Mater. Tech. 124 2002 380 387 (Pubitemid 40000930)
47. W. Roberts, and B. Ahlblom A nucleation criterion for dynamic recrystallization during hot working Acta Metall. 26 1978 801 813 (Pubitemid 8598717)
48. Rollett A.D. Holm E.A., 1996. Abnormal grain growth-the origin of recrystallization nuclei? In: McNelley, T.R. (Ed.), Rex-96. MRS, pp. 31-42.
49. C. Roucoules, M. Pietrzyk, and P.D. Hodgson Analysis of work hardening and recrystallization during hot working of steel using a statistically based internal variable model Mat. Sci. Eng. A339 2003 1 9 (Pubitemid 36178510)
50. T. Sakai, and J.J. Jonas Dynamic recrystallization: mechanical and microstructural considerations Acta Metall. 32 1984 189 209 (Pubitemid 14526295)
51. R. Sandstrom, and R. Lagneborg A model for hot working occurring by recrystallization Acta Metall. 23 1975 387 398
52. Speich G.R. Fisher R.M., 1966. Recrystallization in rapidly heated 3 1/4% silicon iron. In Margolin, H. (Ed.), Recrystallization, grain growth and textures. ASM, pp. 563-598.
53. Svyetlichnyy, D.S., 2007. A coupled model of flow stress and microstructure evolution. NUMIFORM'07, Mater. Proc. Design, pp. 1307-1312.
54. A.B. Tanner, and D.L. McDowell Deformation, temperature and strain rate sequence experiments on OFHC Cu Int. J. Plant 15 4 1999 375 399
55. A.B. Tanner, R.D. McGinty, and D.L. McDowell Modeling temperature and strain rate history effects in OFHC Cu Int. J. Plant 15 4 1999 575 603
56. G.I. Taylor The mechanism of plastic deformation of crystals. Part I. Theoretical Proc. R. Soc. London, Ser. A. A145 1934 362 387
57. P.J. Wray Onset of recrystallization during the tensile deformation of austenitic iron at intermediate strain rates Metall. Trans. A 6 6 1975 1197 1203