Optimising product quality and process control for powdered dairy products

Dairy Processing: Improving Quality

Volumn , Issue , 2003, Pages 333-365

  Verdurmen, R E M ^a   de Jong, P ^a  

^a NIZO FOOD RESEARCH   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84857759340     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781855737075.2.333     Document Type: Chapter

References (55)

1. ADMI (1971) ‘Standards for grades of dry milk including methods of analysis’. Bulletin 916 Chicago: American Dry Milk Institute (Revised)
2. P J ALDERLIESTE, J J FRANSEN and A J V VAN BOXTEL (1984) ‘Control of moisture content of milk powder’. Voedingsmiddelentechnologie 17(6), 21-23
3. T L M ALVES, A C DA COSTA, A W DA SILVA-HENRIQUES and E L LIMA (1998) ‘Adaptive optimal control of fed-batch alcoholic fermentation’. Appl, Biochem. Biotechnol 70-72 463-478
4. D BELUHAN and S BELUHAN (2000) ‘Hybrid modeling approach to on-line estimation of yeast biomass concentration in industrial bioreactor’. Biotechnol. Lett 22 631-635
5. M BENNE, B GRONDIN-PEREZ, J P CHABRIAT and P HERVE (2001) ‘Artificial neural networks for modelling and predictive control of an industrial evaporation process’. J. Food Eng 46 227-234
6. S BOUMAN, D B LUND, F M DRIESSEN and D G SCHMIDT (1982) ‘Growth of thermoresistant streptococci and deposition of milk constituents on plates of heat exchangers during long operating times’. J. Food Prot 45 806-812
7. S BOUMAN, WAALEWIJNR P DE JONG and H J L J VAN LINDEN (1993) ‘Design of falling-film evaporators in the dairy industry’. J. Soc. Dairy Techn 46 100-106
8. Brands C (2002), ‘Kinetic modelling of the Maillard reaction between proteins and sugar’, Ph.D. thesis, Wageningen University, The Netherlands
9. Buma T J (1971), ‘Free fat and physical structure of spray-dried whole milk’, Ph.D. thesis, Wageningen University, The Netherlands
10. X D CHEN (1994) ‘Towards a comprehensive model-based control of milk drying processes’. Drying Technology 12 1105-1130
11. F CORRIEU, I C TRELEA and B PERRET (2001) ‘On-line estimation and prediction of density and ethanol evolution in the brewery’. Technical Quarterly of Masters Brewers’ Association of the Americas 37 173-181
12. P DE JONG (1996) Modelling and Optimization of Thermal Processes in the Dairy Industry The Netherlands: Montfoort
13. P DE JONG and H J L J VAN LINDEN (1998) ‘Polymerisation model for prediction of heat-induced protein denaturation and viscosity changes in milk’. J. Agric. Food Chem 46 2136-2142
14. P DE JONG and R E M VERDURMEN (2001) Mechanisation and Automation in Dairy Technology. A Y TAMIME, B A LAW,(Eds) ‘Concentrated and dried dairy products’ Sheffield: Sheffield Academic Press 95-118
15. P DE JONG, S BOUMAN and H J L J VAN LINDEN (1992) ‘Fouling of heat treatment equipment in relation to the denaturation of β-lactoglobulin’. J. Soc. Dairy Techn 45 3-8
16. De Jong P, van der Horst H C and Waalewijn R (1999), ‘Reduction of protein and mineral fouling’, in Wilson D I, Fryer P J and Hasting A P M (eds), Fouling and Cleaning in Food Processing '98, EUR 18804, Cambridge, 39–46
17. P DE JONG, M C TE GIFFEL and E A KIEZEBRINK (2002) ‘Prediction of the adherence, growth and release of microorganisms in production chains’. Int. J. Food Microbiol 74 13-25
18. P DE JONG, M C TE GIFFEL, H STRAATSMA and M M M VISSERS (2002) ‘Reduction of fouling and contamination by predictive kinetic models’. Int. Dairy J 12 285-292
19. De Jong P, Smit F, Vissers M M M, Straatsma J, Verschueren M and Van der Wiel J (2002c), ‘A new process control system based on predictive kinetic models for food quality and operating costs’, in Proc. 2nd Int. Conf. on Simulation in Food and Bio Industries, SCS Europe, 45–49
20. V DELEMARRE (1994) ‘New control strategy of spray dryers reduces operation costs’. Voedingsmiddelentechnologie 17(3), 20-21
21. J DE VILDER, R MARTENS and M NAUDTS (1979) ‘The influence of the dry matter content, the homogenization and the heating of concentrate on physical characteristics of whole milk powder’. Milchwissenschaft 34(2), 78-84
22. Edecad (2001), Efficient DEsign and Control of Agglomeration in spray Drying machines, EC Fifth Framework Programme within the research programme ‘Competitive and Sustainable Growth’ co-ordinated by NIZO Food Research (www.edecad.com)
23. European Parliament and Council (2000), ‘Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres’, Off. J. Eur. Comm., 28 January
24. I FILKOVÁ and A S MUJUMDAR (1995) Handbook of Industrial Drying. A S MUJUMDAR (Eds) ‘Industrial spray drying systems’ Second edition New York: Marcel Dekker 263-307. Volume 1
25. T A HALEY and S J MULVANEY (2000) ‘On-line system identification and control design of an extrusion cooking process’. Food Control 11 121-129
26. IDF (1979), ‘Determination of the dispersability and wettability of instant dried milk, standard 87’, Brussels, International Dairy Federation
27. IDF (1986), ‘Recommendations for fire prevention in spray drying of milk powder, IDF Document B 128’, Brussels, International Dairy Federation
28. IDF (1988), ‘Dried milk and dried milk products: determination of the insolubility index, standard 129A’, Brussels, International Dairy Federation
29. IDF (1995), ‘Determination of white flecks number, provisional standard 174’, Brussels, International Dairy Federation
30. J KELLY, P M KELLY and D HARRINGTON (2002) ‘Influence of processing variables on the physicochemical properties of spray dried fat-based milk powders’. Lait 82(4), 401-412
31. T KURZ, M FELLNER and BECKER A DELGADO (2002) ‘Observation and control of the beer fermentation using cognitive methods’. J. Inst. Brewing 107 241-252
32. T P LABUZA (1971) ‘Kinetics of lipid oxidation in foods’. CRC Crit. Rev. Food Technol 2(3), 355-405
33. K MASTERS (1991) Spray Drying Handbook New York: Longman Scientific & Technical
34. S MCCLUSKEY, J F CONOLLY, R DEVERY, B O'BRIEN, J KELLY, D HARRINGTON and C STANTON (1997) ‘Lipid and cholesterol oxidation in whole milk powder during processing and storage’. J. Food Sci 62(2), 331-337
35. T NANTAWAN (2002) ‘Hybrid neural modeling’. Int. J. of Food Properties 5 49-61
36. K N PALMER (1990) Principles of Powder Technology. M J RHODES (Eds) ‘Explosion and fire hazards of powders’ John Wiley & Sons
37. J R PÉREZ-CORREA and F FARÍAS (1995) ‘Modelling and control of a spray dryer: a simulation study’. Food Control 6 219-227
38. J PÍSECKÝ (1997) Handbook of Milk Powder Manufacture Copenhagen: Niro A/S
39. Rase -Explosive Atmosphere: Risk Assessment of Unit Operations and Equipment (2000), ‘Report: Methodology for the Risk Assessment of Unit Operations and Equipment for Use in Potentially Explosive Atmospheres’, EU project SMT4-CT97-2169
40. J SCHAAFSMA and J J HAREN STRAATSMA (1997) ‘Process control in the food/dairy industry’. Voedingsmiddelentechnologie 30(14/15), 11-13
41. A W SILVA-HENRIQUES, A C DA COSTA, T L M ALVES and E L LIMA (1999) ‘A hybrid neural model of ethanol production by Zymomonas mobilis’. Appl. Biochem. Biotechnol 77-79 277-291
42. O SKOV (1986) Modern Dairy Technology. Volume 1. Advances in Milk Processing. R K ROBINSON (Eds) ‘Protection against fire and explosion in spray dryers’ Second edition London: Chapman & Hall
43. F SMIT, P DE JONG, J STRAATSMA and M VERSCHUEREN (2001) ‘Premia enables knowledge management. 1. Background and system application’. Voedingsmiddelen-technologie 34(22), 23-26
44. T H M SNOEREN, A J DAMMAN and H J KLOK (1983) ‘De viscositeit van volle melk concentraat en de invloed ervan op de poedereigenschappen’. Zuivelzicht 75 847-849
45. H L STAPPER (1979) ‘Control of an evaporator and spray dryer using feedback and ratio feedforward controller’. N.Z. J. Dairy Sci. Technol 14 241-257
46. A E STEENBERGEN, G VAN HOUWELINGEN and J STRAATSMA (1991) ‘System for early detection of fire in a spray dryer’. J. Soc. Diary Techn 44(3), 76-79
47. J STRAATSMA, G VAN HOUWELINGEN, A P MEULMAN and A E STEENBERGEN (1991) ‘DrySPEC2: a computer model of a two-stage dryer’. J. Soc. Dairy Techn 44 107-111
48. J STRAATSMA, G VAN HOUWELINGEN, A E STEENBERGEN and P DE JONG (1999) ‘Spray drying of food products: 1. Simulation model’. J. Food Engineering 42 67-72
49. J STRAATSMA, G VAN HOUWELINGEN, A E STEENBERGEN and P DE JONG (1999) ‘Spray drying of food products: 2. Prediction of insolubility index’. J. Food Eng 42 73-77
50. I C TRELEA, G ALVAREZ and G TRYSTRAM (1998) ‘Nonlinear predictive optimal control of a batch refrigeration process’. J. Food Process Eng 21 1-32
51. P J J M VAN MIL and J A JANS (1991) ‘Storage stability of whole milk powder: effects of process and storage conditions on product properties’. Neth. Milk Dairy J 45(3), 145-167
52. R E M VERDURMEN, H STRAATSMA, VERSCHUERENM J J VAN HAREN, E SMIT, G BARGEMAN and P DE JONG (2002) ‘Modelling spray drying processes for dairy products’. Lait 82(4), 453-463
53. M VISSERS, P DE JONG and J DE WOLFF (2002) ‘New evaporator design results in 70% reduction of energy consumption’. Voedingsmiddelentechnologie 2002(6), 20-22
54. P WALSTRA, T J GEURTS, A NOOMEN, A JELLEMA and M A J S VAN BOEKEL (1999) Dairy Technology New York: Marcel Dekker
55. B XIA and D-W SUN (2002) ‘Application of computational fluid dynamics (CFD) in the food industry: a review’. Computers and Electronics in Agriculture 34 5-24