Occupational injury and accident research: A comprehensive review

Safety Science

Volumn 50, Issue 5, 2012, Pages 1355-1367

  Khanzode, Vivek V ^a   Maiti, J ^b   Ray, P K ^b  

^a KIT's College of Engineering   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Accident causation; Hazard identification; Injury intervention; Injury mechanism; Occupational accident; Occupational injury; Risk assessment

Indexed keywords

ACCIDENT CAUSATION; HAZARD IDENTIFICATION; INJURY INTERVENTION; INJURY MECHANISMS; OCCUPATIONAL ACCIDENT; OCCUPATIONAL INJURY;

ACCIDENTS; HAZARDOUS MATERIALS; OCCUPATIONAL DISEASES; OCCUPATIONAL RISKS; RISK ASSESSMENT;

RESEARCH;

ACCIDENT PREVENTION; ACCIDENT PRONENESS; BEHAVIORAL INTERVENTION; DEVIATION MODEL; ENERGY MODEL; ENFORCEMENT INTERVENTION; ENGINEERING INTERVENTION; ERGONOMICS; HUMAN; INDIVIDUAL RELATED FACTOR; INJURY SEVERITY MODEL; JOB RELATED FACTOR; MOTIVATION; NONBIOLOGICAL MODEL; OCCUPATIONAL ACCIDENT; OCCUPATIONAL HAZARD; ORGANIZATION RELATED FACTOR; PRIORITY JOURNAL; RESEARCH; REVIEW; RISK ASSESSMENT; RISK FACTOR; TAXONOMY;

EID: 84857236205     PISSN: 09257535     EISSN: 18791042     Source Type: Journal    
DOI: 10.1016/j.ssci.2011.12.015     Document Type: Review

References (237)

1. Aborg C., Fernstrom E., Ericson M. Work content and satisfaction before and after a reorganization of data entry work. Applied Ergonomics 1998, 29:473-480.
2. Andriessen J. Safe behavior and safety motivation. Journal of Occupational Accidents 1978, 1:363-376.
3. Appelbaum S. Socio-technical systems theory: an intervention strategy for organizational development. Management Decision 1997, 35:452-463.
4. Arunraj N., Maiti J. Risk-based maintenance: techniques and applications. Journal of Hazardous Materials 2007, 142:653-661.
5. Attwood D., Khan F., Veitch B. Occupational accident models: where we have been and where are we going?. Journal of Loss Prevention in the Process Industries 2006, 19:664-682.
6. Ayoub M. The problem of occupational safety. Industrial Engineering 1975, 7:16-23.
7. Ayoub M. Integrated safety management information system: Part I: design and architecture. Journal of Occupational Accidents 1979, 2:135-157.
8. Ayoub M. Simulation modeling and analysis in safety: Part I: planning and design. Journal of Occupational Accidents 1980, 3:3-20.
9. Bahr N. System Safety Engineering and Risk Assessment - A Practical Approach 1997, Taylor & Francis, Washington DC.
10. Bailer A., Reed L., Stayner L. Modeling fatal injury rates using Poisson regression: a case study of workers in agriculture, forestry, and fishing. Journal of Safety Research 1997, 28:177-186.
11. Bajpayee T., Rehak T., Mowrey G., Ingram D. Blasting injuries in surface mining with emphasis on flyrock and blast area security. Journal of Safety Research 2004, 35:47-57.
12. Bellamy L., Geyer T., Wilkinson J. Development of a functional model which integrates human factors, safety management systems and wider organizational issues. Safety Science 2008, 46:461-492.
13. Bennett J., Passmore D. Correlates of coalmine accidents and injuries: a literature review. Accident Analysis and Prevention 1984, 16:37-45.
14. Bennett J., Passmore D. Days lost from work due to injuries in US underground bituminous coal mines. Journal of Occupational Accidents 1984, 5:265-278.
15. Bennett J., Passmore D. Multinomial logit analysis of injury severity in US underground bituminous coal mines. Accident Analysis and Prevention 1985, 17:399-408.
16. Bhattacherjee A., Maiti J. A new look into quantitative analysis of mine safety studies. Transactions of the Society for Mining, Metallurgy, and Exploration, Inc. 2000, 308:83-90.
17. Bird F., Germain G. Practical Loss Control Leadership 1992, International Loss Control Institute Inc., Loganville, Georgia.
18. Bird F., Loftus R. Loss Control Management 1976, Institute Press, Loganville, Georgia.
19. Blank V., Laflamme L., Diderichsen F. The impact of major transformations of a produc-tion process on age-related accident risks: a study of an iron ore mine. Accident Analysis and Prevention 1996, 28:627-636.
20. Boyd A., Radson D. Statistical analysis of injury severity rates. IIE Transactions 1999, 31:207-216.
21. Brenner L. Accident investigations: multilinear events sequencing methods. Journal of Safety Research 1975, 1:67-73.
22. Brown K., Willis P., Prussia G. Predicting safe employee behavior in the steel industry: development and test of a sociotechnical model. Journal of Operations Management 2000, 18:445-465.
23. Butani S. Relative risk analysis of injuries in coal mining by age and experience at present company. Journal of Occupational Accidents 1988, 10:209-216.
24. Carayon P. Human factors of complex sociotechnical systems. Applied Ergonomics 2006, 37:525-535.
25. Carayon P., Smith M. Work organization and ergonomics. Applied Ergonomics 2000, 31:649-662.
26. Carder B., Ragan P. A survey-based system for safety measurement and improvement. Journal of Safety Research 2003, 34:157-165.
27. Castle P. Accidents, absence and withdrawal from the work situation. Human Relations 1956, 9:223-233.
28. Chang W. A statistical model to estimate the probability of slip and fall incidents. Safety Science 2004, 42:779-789.
29. Cherns A. The principles of sociotechnical design. Human Relations 1976, 29:783-792.
30. Cherns A. Principles of sociotechnical design revisited. Human Relations 1987, 40:153-162.
31. Cheyne A., Oliver A., Tomas J., Cox S. The architecture of employee attitudes to safety in the manufacturing sector. Personnel Review 2002, 31:649-670.
32. Chow C., Lee H., Lau J., Yu I. Transient risk factors for acute traumatic hand injuries: a case-crossover study in Hong Kong. Occupational Environmental Medicine 2007, 64:47-52.
33. Christmansson M., Friden J., Sollerman C. Task design, psycho-social work climate and up-per extremity pain disorders: effects of an organizational redesign on manual repetitive assembly jobs. Applied Ergonomics 1999, 30:463-472.
34. Chung M., Wu S., Herrin G. The use of mixed Weibull model in occupational injury analysis. Journal of Occupational Accidents 1986, 7:239-250.
35. Clegg C. Appropriate technology for manufacturing: some management issues. Applied Ergonomics 1988, 19:25-34.
36. Clegg C. Sociotechnical principles for system design. Applied Ergonomics 2000, 31:463-477.
37. Coleman P., Kerkering J. Measuring mining safety with injury statistics: lost workdays as indicators of risk. Journal of Safety Research 2007, 38:523-533.
38. Colombini D., Occhipinti E. Preventing upper limb work-related musculoskeletal disorders (UL-WMSD): new approaches in job (re)design and current trends in standardization. Applied Ergonomics 2006, 37:441-450.
39. CPS Guidelines for Hazard Evaluation Procedures 1992, Center for Chemical Process Safety, American Institute of Chemical Engineers, New York.
40. Cuny X., Lejeune M. Occupational risks and the value and modelling of a measurement of severity. Safety Science 1999, 31:213-229.
41. Cuny X., Lejeune M. Statistical modelling and risk assessment. Safety Science 2003, 41:29-51.
42. David G., Woods V., Li G., Buckle P. The development of the Quick Exposure Check (QEC) for assessing exposure to risk factors for work-related musculoskeletal disorders. Applied Ergonomics 2008, 39:57-69.
43. Davids A., Mahoney J. Personality dynamics and accident proneness in an industrial setting. Journal of Applied Psychology 1957, 41:303-305.
44. Davies J., Kemp G., Frostick S., McElwaine C.D.J. Manual handling injuries and long term disability. Safety Science 2003, 41:611-625.
45. Davis D., Coiley P. Accident proneness in motor-vehicle drivers. Ergonomics 1959, 2:239-246.
46. Dawson D. Heavy drinking and the risk of occupational injury. Accident Analysis and Prevention 1994, 26:655-665.
47. Deming W. Out of the Crisis 1986, MIT Center for Advanced Engineering Study, Cambridge.
48. Duzgun M.A., Einstein H. Assessment and management of roof fall risks in underground coal mines. Safety Science 2004, 42:23-41.
49. Emery F. Systems Thinking 1969, Penguin, London.
50. Eysenck I. The personality of drivers and pedestrians. Accident Research: Methods and Approaches 1964, Harper and ROW, New York. W. Haddon, E. Suchman, D. Klein (Eds.).
51. Farmer, E., Chambers, E., 1929. A study of personal qualities in accident proneness and proficiency. Tech. Rep., Industrial Health Research Board, His Majesty's Stationery Office, London.
52. Ferguson J., McNally M., Booth R. Individual characteristics as predictors of accidental injuries in naval personnel. Accident Analysis and Prevention 1984, 16:55-62.
53. Ferguson J., McNally M., Booth R. Accidental injuries among naval personnel by occupation, duty status, and pay-grade. Accident Analysis and Prevention 1985, 17:79-86.
54. Ferguson S., Marras W., Burr D. Workplace design guidelines for asymptotic vs. low-back-injured workers. Applied Ergonomics 2005, 36:85-95.
55. Ferry T. Modern Accident Investigation and Analysis 1988, Wiley, New York.
56. Fine B. Introversion-extroversion and motor vehicle driver behavior. Perceptual and Motor Skills 1963, 16:95-100.
57. Fotta, B., Bockosh, G., 2000. The aging workforce: an emerging issue in the mining industry.
58. Franceschini F., Galetto M. A new approach for evaluation of risk priorities of failure modes in FMEA. International Journal of Production Research 2001, 39:2991-3002.
59. Frank A. Injuries related to shift work. American Journal of Preventive Medicine 2000, 18:33-36.
60. Freivalds A., Johnson A. Time series analysis of industrial accident data. Journal of Occupational Accidents 1990, 13:179-193.
61. Fullarton C., Stokes M. The utility of a workplace injury instrument in prediction of work place injury. Accident Analysis and Prevention 2007, 39:28-37.
62. Galli E. A sociological case study of occupational accidents in the Brazilian petrochemical industry. Accident Analysis and Prevention 1999, 31:297-304.
63. Genaidy A., Karwowski W., A-Rehim A. The work compatibility improvement framework: preliminary findings of a case study for defining and measuring the human-at-work system. Ergonomics 2007, 50:1771-1808.
64. Genaidy A., Rinder M., A-Rehim A. The work compatibility improvement framework: an assessment of the worker-work environment interaction in the manufacturing sector. Ergonomics 2008, 51:1195-1218.
65. Genaidy A., Salem S., Karwowski W., Paez O., Tuncle S. The work compatibility improvement framework: an integrated perspective of the human-at-work system. Ergonomics 2007, 50:3-25.
66. Genaidy A., Sequeira R., Rinder M., A-Rehim A. Determinants of business sustainability: an ergonomics perspective. Ergonomics 2009, 52:273-301.
67. Geneidy A. Physical ergonomics job design: an accident prevention approach to control upper extremity cumulative trauma disorders in manufacturing industry. Journal of Occupational Accidents 1990, 13:303-320.
68. Gillen M., Baltz D., Gassel M., Kirsch L., Vaccaro D. Perceived safety climate, job demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research 2002, 33:33-51.
69. Greenwood, M., Woods, H., 1919. The incidence of industrial accidents upon individuals with special reference to multiple accidents. Tech. rep., Industrial Fatigue Research Board, London.
70. Greenwood M., Yule G. An inquiry into the nature of frequency distributions representative of multiple happenings, with particular reference to the occurrence of multiple accidents or disease or repeated accidents. Journal of Royal Statistical Society 1920, 83:255.
71. Guastello D., Guastello S. The relationship between work group size and occupational accidents. Journal of Occupational Accidents 1987, 9:1-9.
72. Guilford J. Prediction of accidents in a standardized home environment. Journal of Applied Psychology 1973, 57:306-313.
73. Gun R. The role of regulations in the prevention of occupational injury. Safety Science 1993, 16:47-66.
74. Gun R., Ryan C. A case-control study of possible risk factors in the causation of occupational injury. Safety Science 1994, 18:1-13.
75. Haddon W. The changing approach to the epidemiology, prevention, and amelioration of trauma: the transition to approaches ethologically rather than descriptively based. American Journal of Public Health 1968, 58:1431-1438.
76. Haddon W. A logical framework for categorizing highway safety phenomenon and activity. Journal of Trauma 1972, 12:193-207.
77. Haddon W. The basic strategies for reducing damage from hazard of all kinds. Hazard Prevention 1980, 16:8-12.
78. Haddon W., Suchman E., Klein D. Accident Research: Methods and Approaches 1964, Harper & ROW, New York.
79. Hale A. Safety rules O. K.? Possibilities and limitations in behavioral safety strategies. Journal of Occupational Accidents 1990, 12:3-20.
80. Hale A., Hale M. Accidents in perspective. Occupational Psychology 1970, 44:115-122.
81. Hale, A., Hale, M., 1972. A review of the industrial accident research literature. Tech. rep., Her Majesty's Stationery Office, London.
82. Harms-Ringdahl L. Safety Analysis: Principles and Practice in Occupational Safety 1993, Elsevier Applied Science, London.
83. Hasan R., Bernard A., Ciccotelli J., Martin P. Integrating safety into the design process: elements and concepts relative to the working situation. Safety Science 2003, 41:155-179.
84. Haslam R., Hide S., Gibb A., Gyi D., Pavitt T., Atkinson S., Duff A. Contributing factors in construction accidents. Applied Ergonomics 2005, 36:401-415.
85. Heath E. Worker training and education in occupational safety and health- a report on practice in six industrialized western nations: part two of a four part series. Journal of Safety Research 1982, 13:73-87.
86. Heinrich H. Industrial Accident Prevention 1932, McGraw Hill, New York. first ed.
87. Heinrich H., Petersen D., Ross N. Industrial Accident Prevention 1980, McGraw-Hill, New York. fifth ed.
88. Hendrick H. Macroergonomics as a preventive strategy in occupational health: an organizational level approach. Human Factors in Organizational Design and Management II 1986, Elsevier Science. H. Hendrick, G. Bradley (Eds.).
89. Henley E., Kumamoto H. Reliability Engineering and Risk Assessment 1981, Prentice-Hall Inc, New Jersey.
90. Hess J., Hecker S., Weinstein M., Lunger M. A participatory ergonomics intervention to reduce risk factors for low-back disorders in concrete laborers. Applied Ergonomics 2004, 35:427-441.
91. Hill J., Trist E. A consideration of industrial accidents as a means of withdrawal from the work situation- a study of their relation to other absences in an iron and steel works. Human Relations 1953, 6:357-380.
92. Hobbs A., Williamson A. Unsafe acts and unsafe outcomes in aircraft maintenance. Ergonomics 2002, 45:866-882.
93. Hollnagel E. Barriers and Accident Prevention 2004, Ashgate Publishing Limited, Aldershot Hants.
94. Holmstrom E., Ahlborg B. Morning warming-up exercise: effects on musculoskeletal fitness in construction workers. Applied Ergonomics 2005, 36:513-519.
95. Hopkins A. What are we to make of safe behavior programs?. Safety Science 2006, 44:583-597.
96. Huang Y., Ho M., Smith G., Chen P. Safety climate and self-reported injury: assessing the mediating role of employee safety control. Accident Analysis and Prevention 2006, 38:425-433.
97. Hull B., Leigh J., Driscoll T., Mandryk J. Factors associated with occupational injury severity in the New South Wales underground coal mining industry. Safety Science 1996, 21:191-204.
98. ICECI, 2004. International Classification of External Causes of Injuries. ICECI Coordination and Maintenance Group, World Health Organization.
99. ILO, 1988. Major Hazard Control - A Practical Manual. International Labour Organization, Geneva.
100. Irwin J. The personal factor in accidents- a review article. Journal of Royal Statistical Society- A 1964, 127:438-451.
101. Jeong B. Comparisons of variables between fatal and nonfatal accidents in manufacturing industry. International Journal of Industrial Ergonomics 1999, 23:565-572.
102. Johnson W. MORT Safety Assurance Systems 1980, National Safety Council, New York.
103. Keating C., Fernandez A., Jacobs D., Kauffmann P. A methodology for analysis of complex sociotechnical processes. Business Process Management Journal 2001, 7:33-49.
104. Kee D., Karwowski W. LUBA: an assessment technique for postural loading on the upper body based on joint motion discomfort and maximum holding time. Applied Ergonomics 2001, 32:357-366.
105. Keehn J. Factor analysis of reported minor personal mishaps. Journal of Applied Psychology 1959, 43:311-314.
106. Kejriwal B. Safety in Mines: A Survey of Accidents, Their Causes and Prevention 2002, Lovely Prakashan, Dhanbad.
107. Kerr W. Accident proneness of factory departments. Journal of Applied Psychology 1950, 34:167-170.
108. Kerr W. Complementary theories of safety psychology. Journal of Social Psychology 1957, 45:3-9.
109. Keyserling W. Occupational injuries and work experience. Journal of Safety Research 1983, 14:37-42.
110. Khan F., Amyotte P., DiMattia D. HEPI: a new tool for human error probability calculation for offshore operation. Safety Science 2006, 44:313-334.
111. Khanzode V., Maiti J., Ray P. A methodology for evaluation and monitoring of recurring hazards in underground coal mines. Safety Science 2011, 49:1172-1179.
112. Khanzode V., Maiti J., Ray P., Tewari V. Injury severity assessment for underground coalmine workers. Applied Ergonomics 2010, 41:242-250.
113. Kirchner W. The fallacy of accident proneness. Personnel 1961, 38:34-37.
114. Kirwan B. A practical ergonomics methodology. Human Reliability Assessment 1990, Taylor and Francis, London. J. Wilson, E. Corlett (Eds.).
115. Kjellen U. An evaluation of safety information systems at six medium-sized and large firms. Journal of Occupational Accidents 1982, 3:273-288.
116. Kjellen U. The deviation concept in occupational accident control - I: definitions and classification. Accident Analysis and Prevention 1984, 16:289-306.
117. Kjellen U. The deviation concept in occupational accident control - II: data collection and assessment of significance. Accident Analysis and Prevention 1984, 16:307-323.
118. Kjellen U. The role of deviations in accident causation and control. Journal of Occupational Accidents 1984, 6:117-126.
119. Kjellen U. Simulating the use of a computerized injury and near accident information system in decision making. Journal of Occupational Accidents 1987, 9:87-105.
120. Kjellen U. Integrating analyses of the risk of occupational accidents into the design process - part II: method for prediction of the LTI-rate. Safety Science 1995, 19:3-18.
121. Kjellen U., Hovden J. Reducing risks by deviation control - a retrospection into a research strategy. Safety Science 1993, 16:417-438.
122. Kjellen U., Larsson T. Investigating accidents and reducing risks- a dynamic approach. Journal of Occupational Accidents 1981, 3:129-140.
123. Kjellen U., Sklet S. Integrating analyses of the risk of occupational accidents into the design process - part I: a review of types of acceptance criteria and risk analysis methods. Safety Science 1995, 18:215-227.
124. Kleiner B. Macroergonomics: analysis and design of work systems. Applied Ergonomics 2006, 37:81-89.
125. Kletz T. The need for friendly plants. Journal of Occupational Accidents 1990, 13:3-13.
126. Krause T., Seymour K., Sloat K. Long-term evaluation of a behavior-based method for improving safety performance: a meta-analysis of 73 interrupted time-series replications. Safety Science 1999, 32:1-18.
127. Kumamoto, H., Henley, E., 1996. Probabilistic Risk Assessment and Management for Engineers and Scientists, second ed. IEEE Press.
128. Kunce J. Vocational interests and accident proneness. Journal of Applied Psychology 1967, 51:223-225.
129. Kunce J. SVIB scores and accident proneness. Measurement and Evaluation in Guidance 1974, 7:118-121.
130. Laamme L., Menckel E. Aging and occupational accidents: a review of the literature of the last three decades. Safety Science 1995, 21:145-161.
131. Langley J. The need to discontinue the use of the term "accident" when referring to unintentional injury events. Accident Analysis and Prevention 1988, 20:1-8.
132. Laurence D. Safety rules and regulations on mine sites: the problem and a solution. Journal of Safety Research 2005, 36:39-50.
133. Leamon T. The organization of industrial ergonomics: a human-machine model. Applied Ergonomics 1980, 11:223-226.
134. Leamon T. Human-workplace model: an integrated approach to occupational injury and illness. International Journal of Industrial Ergonomics 1988, 2:211-219.
135. Lees F. Loss Prevention in the Process Industries 1980, Butterworth and Co Ltd, London.
136. Leigh J., Mulder H., Want G., Farnsworth N., Morgan G. Personal and environmental factors in coal mining accidents. Journal of Occupational Accidents 1990, 13:233-250.
137. Leplat J. Occupational accident research and systems approach. Journal of Occupational Accidents 1984, 6:77-89.
138. Leveson N. A new accident model for engineering safer systems. Safety Science 2004, 42:237-270.
139. Levin L., Oler J., Whiteside J. Injury incident rates in a paint company on rotating production shifts. Accident Analysis and Prevention 1985, 17:67-73.
140. Lindell M. Occupational safety and health inspection scores predict rates of workers' lost time injuries. Accident Analysis and Prevention 1997, 29:563-571.
141. Lozada-Larsen, S., Laughery, K., 1987. Do identical circumstances precede minor and major injuries? In: Rising to New Heights with Technology, vol. 1. Human Factors Society, New York, pp. 200-204.
142. Maiti J. Risk assessment and safety evaluation of mining system. Journal of Institution of Engineers (India) - Mining 2005, 85:33-41.
143. Maiti J. Development of worksystem safety capability index (WSCI). Safety Science 2010, 48:1369-1379.
144. Maiti J., Bhattacharjee A. A causal model for evaluation of mine safety. Transaction of the Institute of Mining and Metallurgy (Section A - Mining Technology) 2000, 109:A55-A59.
145. Maiti J., Bhattacherjee A. Evaluation of risk of occupational injuries among underground coal mine workers through multinomial logit analysis. Journal of Safety Research 1999, 30:93-101.
146. Maiti J., Bhattacherjee A., Bangdiwala S. Loglinear model for analysis of cross-tabulated coal mine injury data. Injury Control and Safety Promotion 2001, 8:229-236.
147. Maiti J., Chatterjee S., Bangdiwala S. Determinants of work injuries in mines: an application of structural equation modelling. Injury Control and Safety Promotion 2004, 11:29-37.
148. Maiti J., Khanzode V. Development of a relative risk model for roof and side fall fatal accidents in underground coal mines in India. Safety Science 2009, 47:1068-1076.
149. Maiti J., Khanzode V., Ray P. Severity analysis of Indian coal mine accidents- a retrospective study for 100 years. Safety Science 2009, 47:1033-1042.
150. Majchrzak A., Borys B. Generating testable socio-technical systems theory. Journal of Engineering Technology Management 2001, 18:219-240.
151. Mallick S., Mukherjee K. An empirical study for mines safety management through analysis on potential for accident reduction. Omega 1996, 24:539-550.
152. Mason, A., October 1973. How to determine your safety and health training needs. In: Proceedings of 28th Annual Federal Safety Conference. Chicago, Illinois.
153. McAtamney L., Corlett E. RULA: a survey method for the investigation of work-related upper limb disorders. Applied Ergonomics 1993, 24:91-99.
154. McKenna F. Accident proneness: a conceptual analysis. Accident Analysis and Prevention 1983, 15:65-71.
155. McLeod R., Stockwell T., Rooney R., Stevens M., Phillips M., Jelinek G. The influence of extrinsic and intrinsic risk factors on the probability of sustaining an injury. Accident Analysis and Prevention 2003, 35:71-80.
156. Menckel E. Safety engineers and accident prevention- an inventory of activities within one industrial sector in Sweden. Journal of Occupational Accidents 1990, 12:271-282.
157. Mitchell C., Cloeren M., Schwartz B. Application of an injury surveillance system to injuries at an industrial facility. Accident Analysis and Prevention 1993, 25:453-458.
158. Mol, T., 2003. Productive Safety Management. Butterworth Heinemann.
159. Morel G., Chauvin C. A socio-technical approach of risk management applied to collisions involving fishing vessels. Safety Science 2006, 44:599-619.
160. Mullen J. Investigating factors that influence individual safety behavior at work. Journal of Safety Research 2004, 35:275-285.
161. Nieuwhof G. Risk: a probabilistic concept. Reliability Engineering 1985, 10:183-188.
162. Oleske D., Brewer R., Doan P., Hahn J. An epidemiologic evaluation of the injury experience of a cohort of automative parts workers: a model for surveillance in small industries. Journal of Occupational Accidents 1989, 10:239-253.
163. OSHA, 2002. Small Business Handbook. OSHA-2209-02R.
164. O'Toole M. Successful safety committees: participation not legislation. Journal of Safety Research 1999, 30:39-65.
165. O'Toole M. The relationship between employees' perceptions of safety and organizational culture. Journal of Safety Research 2002, 33:231-243.
166. Papazoglou I., Ale B. A logical model for quantification of occupational risk. Reliability Engineering and System Safety 2007, 92:785-803.
167. Paul P., Maiti J. Development and test of a sociotechnical model for accident/injury occurrences in underground coalmines. The Journal of the South African Institute of Mining and Metallurgy 2005, 105:1-12.
168. Paul P., Maiti J. The role of behavioral factors on safety management in underground mines. Safety Science 2007, 45:449-471.
169. Paul P., Maiti J. The synergic role of sociotechnical and personal characteristics on work injuries in mines. Ergonomics 2008, 51:737-767.
170. Paul P., Maiti J., Dasgupta S., Forjuoh S. An epidemiological study of injury in mines: implications for safety promotion. Injury Control and Safety Promotion 2005, 12:157-165.
171. Perrow, C., 1984. Normal Accidents: Living with High-risk Technologies, second ed. Princeton University Press.
172. Petersen D. Techniques of Safety Management: A Systems Approach 1989, Aloray Goshen, New York. third ed.
173. Pines A., Halfon S., Prior R. Occupational accidents in the construction industry of Israel. Journal of Occupational Accidents 1987, 9:225-243.
174. Pohjola V. Fundamentals of safety conscious process design. Safety Science 2003, 41:181-218.
175. Powell P.I., Hale M., Martin J., Simon M. Accidents: A Shop OOR Study of Their Causes 1971, National Institute for Industrial Psychology, London.
176. Prussia G., Brown K., Willis G. Mental models of safety: do managers and employees see eye to eye?. Journal of Safety Research 2003, 34:143-156.
177. Purswell J., Rumar K. Occupational accident research: where we have been and where are we going?. Journal of Occupational Accidents 1984, 6:219-228.
178. Putz-Anderson V. Cumulative Trauma Disorders: A Manual for Musculoskeletal Diseases of the Upper Limbs 1988, Taylor and Francis, London.
179. Rao-Tummala V., Leung Y. A risk management model to assess safety and reliability risks. International Journal of Quality and Reliability Management 1996, 13:53-62.
180. Rasmussen J. Human errors: a taxonomy for describing human malfunction in industrial installations. Journal of Occupational Accidents 1982, 4:311-333.
181. Rasmussen J. Risk management in a dynamic society: a modeling problem. Safety Science 1997, 27:183-213.
182. Reason, J., 1990. Human Error. Cambridge University Press.
183. Reason J. Managing the Risks of Organizational Accidents 1997, Adershot, UK.
184. Reiman T., Oedewald P. Assessment of complex sociotechnical systems: theoretical issues concerning the use of organizational culture and organizational core task concepts. Safety Science 2007, 45:745-768.
185. Robertson L. Injury Epidemiology: Research and Control Strategies 1998, Oxford University Press, New York.
186. Robins S. Organization Theory: Structure, Design, and Applications 2000, Prentice Hall of India, New Delhi.
187. Robinson G. Accidents and sociotechnical systems: principles for design. Accident Analysis and Prevention 1982, 14:121-130.
188. Rundmo T. Associations between risk perception and safety. Safety Science 1996, 24:197-209.
189. Rundmo T., Hale A. Managers' attitudes towards safety and accident prevention. Safety Science 2003, 41:557-574.
190. Saari J. Accidents and progress of technology in Finnish industry. Journal of Occupational Accidents 1982, 4:133-144.
191. Salminen S. Have young workers more injuries than older ones? An international literature review. Journal of Safety Research 2004, 35:513-521.
192. Salminen S., Heiskanen M. Correlations between traffic, occupational, sports and home accidents. Accident Analysis and Prevention 1997, 29:33-36.
193. Salminen S., Saari J., Saarela K., Rasanen T. Fatal and non-fatal occupational accidents: identical versus differential causation. Safety Science 1992, 15:109-118.
194. Sari M., Duzgun H., Karpuz C., Selcuk A. Accident analysis of two Turkish underground coal mines. Safety Science 2004, 42:675-690.
195. Schulzinger M. A closer look at accident proneness. National Safety News 1954, 69:32-33.
196. Seo D. An explicative model of unsafe work behavior. Safety Science 2005, 43:187-211.
197. Shannon H., Manning D. Differences between lost-time and non-lost time industrial accidents. Journal of Occupational Accidents 1980, 2:265-272.
198. Shaw, L., Sichel, H., 1971. Accident proneness. International Series of Monographs in Experimental Psychology, vol. II. Pergamon Press, Oxford.
199. Sheu J., Hwang J., Wang J. Diagnosis and monetary quantification of occupational injuries by indices related to human capital loss: analysis of a steel company as an illustration. Accident Analysis and Prevention 2000, 32:435-443.
200. Singleton W. Accidents and progress of technology. Journal of Occupational Accidents 1982, 4:91-102.
201. Singleton W. Application of human error analysis to occupational accident research. Journal of Occupational Accidents 1984, 6:107-115.
202. Singleton W. Future trends in accident research in European countries. Journal of Occupational Accidents 1984, 6:3-12.
203. Siu O., Phillips D., Leung T. Safety climate and safety performance among construction workers in Hong Kong- the role of psychological strains as mediators. Accident Analysis and Prevention 2004, 36:359-366.
204. Smillie R., Ayoub M. Accident causation theories: a simulation approach. Journal of Occupational Accidents 1976, 1:47-68.
205. Smith G., Huang Y., Ho M., Chen P. The relationship between safety climate and injury rates across industries: the need to adjust for injury hazards. Accident Analysis and Prevention 2006, 38:556-562.
206. Smith M., Sainfort P. A balance theory of job design for stress reduction. International Journal of Industrial Ergonomics 1989, 4:67-79.
207. Soloman K., Alesch K. The index of harm: a measure for comparing occupational risk across industries. Journal of Occupational Accidents 1989, 11:19-35.
208. Sorock G., Lombardi D., Courtney T., Cotnam J., Mittleman M. Epidemiology of occupational acute traumatic hand injuries: a literature review. Safety Science 2001, 38:241-256.
209. Sorock G., Lombardi D., Hauser R., Eisen E., Herrick R., Mittleman M. A case-crossover study of transient risk factors for occupational acute hand injury. Occupational Environmental Medicine 2004, 61:305-311.
210. Storbakken, R., 2002. An Incident Investigation Procedure for Use in Industry. Master's thesis, The Graduate School, University of Wisconsin-Stout, Menomonie, WI.
211. Sulzer-Azaroff B. The modification of occupational safety behavior. Journal of Occupational Accidents 1987, 9:177-197.
212. Suokas J. The role of safety analysis in accident prevention. Accident Analysis and Prevention 1988, 20:67-85.
213. Suokas, J., Rouhiainen, V., 1984. Work Safety Analysis: Method Description and User's Guide. Technical Research Center of Finland, Espoo, Finland.
214. Surry, J., 1969. Industrial Accident Research: A Human Engineering Appraisal. Tech. rep., Labour Safety Council, Ministry of Labour, Government of Canada.
215. Susman G. Autonomy at Work: A Sociotechnical Analysis of Participative Management 1976, Praeger Publishers, New York.
216. Svedung I., Rasmussen J. Graphic representation of accident scenarios: mapping system structure and the causation factors. Safety Science 2002, 40:397-417.
217. Taylor J. A Background to Risk Analysis 1979, Electronics Department, RisØ National Laboratory, Denmark.
218. Tayyari F., Smith J. Occupational Ergonomics: Principles and Applications 1997, Kluwer Academic Publishers, Boston.
219. Tixier J., Dusserre G., Salvi O., Gaston D. Review of 62 risk analysis methodologies of industrial plants. Journal of Loss Prevention in the Process Industries 2002, 15:291-303.
220. Torma-Krajewski J., Steiner L., Lewis P., Gust P., Johnson K. Implementation of an ergonomic process at a US surface coal mine. International Journal of Industrial Ergonomics 2007, 37:157-167.
221. Trist E., Bamforth K. Some social and psychological consequences of the long-wall method of coal-getting. Human Relations 1951, 4:3-38.
222. Tuominen R., Saari J. A model for analysis of accidents and its application. Journal of Occupational Accidents 1982, 4:263-273.
223. Verhaegen P., Strubbe J., Vonck R., van den Abeele J. Absentism, accidents and risk taking. Journal of Occupational Accidents 1985, 7:177-186.
224. Verhaegen P., Vanhalst B., Derijcke H., Hoecke M.V. The value of some psychological theories on industrial accidents. Journal of Occupational Accidents 1976, 1:39-45.
225. Visser E., Pijl Y., Stolk R., Neeleman J., Rosmalen J. Accident proneness, does it exist? A review and meta-analysis. Accident Analysis and Prevention 2007, 39:556-564.
226. Warr P. In what circumstances does job performance vary with age?. European Work and Organizational Psychologist 1993, 3:237-249.
227. Webster Webster's Third New International Dictionary: Unabridged 2002, Merriam Webster Inc.
228. Wehmeier, S., McIntosh, C., Turnbull, J., Ashby, M., 2005. Oxford Advanced Learner's Dictionary of Current English, seventh ed. Oxford University Press.
229. Whitlock G., Clouse R., Spencer W. Predicting accident proneness. Personnel Psychology 1963, 16:35-44.
230. Whysall Z., Haslam C., Haslam R. A stage of change approach to reducing occupational ill health. Preventive Medicine 2006, 43:422-428.
231. Williams J., Scott-Geler E. Behavior-based intervention for occupational safety: critical impact of social comparison feedback. Journal of Safety Research 2000, 31:135-142.
232. Willquist P., Torner M. Identifying and analysing hazards in manufacturing industry- a review of selected methods and development of a framework for method applicability. International Journal of Industrial Ergonomics 2003, 32:165-180.
233. Woodcock K., Drury C., Smiley A., Ma J. Using simulated investigations for accident investigation studies. Applied Ergonomics 2005, 36:1-12.
234. Zohar D. Safety climate in industrial organizations: theoretical and applied implications. Journal of Applied Psychology 1980, 65:96-101.
235. Zohar D. Thirty years of safety climate research: reflections and future directions. Accident Analysis and Prevention 2010, 42:1517-1522.
236. Zurada J., Karwowski W., Marras W. A neural network-based system for classification of industrial jobs with respect to risk of low back disorders due to workplace design. Applied Ergonomics 1997, 28:49-58.
237. Zwerling C., Sprince N., Wallace R., Davis C., Whitten P., Heering S. Alcohol and occupational injuries among older workers. Accident Analysis and Prevention 1996, 28:371-376.