Carbon nanofiber reinforced aluminum matrix composite fabricated by combined process of spark plasma sintering and hot extrusion

Journal of Nanoscience and Nanotechnology

Volumn 11, Issue 5, 2011, Pages 4119-4126

  Kwon, Hansang ^a   Kurita, Hiroki ^b   Leparoux, Marc ^a   Kawasaki, Akira ^b  

^a SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^b TOHOKU UNIVERSITY   (Japan)

Author keywords

Carbon nanofiber (CNF); Hot extrusion; Mechanical properties; Metal matrix composites; Spark plasma sintering (SPS)

Indexed keywords

AL POWDER; BULK MATERIALS; COMBINED PROCESS; COMPLEX MATRICES; ENGINEERING REINFORCEMENT; HOT EXTRUSION; HOT EXTRUSION PROCESS; MATRIX; MATRIX MATERIALS; METAL MATRIX COMPOSITES; MICRO-STRUCTURAL; REINFORCED ALUMINUM; SCANNING ELECTRONS; SPARK PLASMA SINTERING (SPS); WELL-DISPERSED;

CARBIDES; CARBON NANOFIBERS; EXTRUSION DIES; GRAIN BOUNDARIES; MATERIALS HANDLING EQUIPMENT; MECHANICAL PROPERTIES; METALLIC MATRIX COMPOSITES; RUBBER; SPARK PLASMA SINTERING; TRANSMISSION ELECTRON MICROSCOPY;

ALUMINUM;

EID: 84856893229     PISSN: 15334880     EISSN: None     Source Type: Journal    
DOI: 10.1166/jnn.2011.3866     Document Type: Conference Paper

References (52)

1. Y. Tang, L. Liu, W. Li, B. Shen, and W. Hu, Appl. Surf. Sci. 255, 4393(2009).
2. S. J. Park and M. S. Cho, Carbon 38, 1053(2000).
3. T. Suzuki, Comp. Sci. Technol. 56, 147(1996).
4. F. F. Komarov and A. M. Mironov, Phys. Chem. Solid State 5, 411(2004).
5. M. F. Yu, O. Laurie, M. J. Dyer, K. Moloni, T. F. Kelly, and R. S. Ruoff, Science 287, 637(2000).
6. P. Kim, L. Shi, A. Majumdar, and P. L. McEuen, Phys. Rev. Lett. 87, 2155021(2001).
7. G. D. Zhan, J. D. Kunts, J. Wan, and A. K. Mukherjee, Nat. Mater. 2, 28(2003).
8. K. Balani, S. R. Bakshi, Y. Chen, T. Laha, and A. Agarwal, J. Nanosci. Nanotechnol. 7, 3553(2007).
9. T. Kuzumaki, K. Miyazawa, H. Ichinose, and K. Ito, J. Mater. Res. 9, 2445(1998).
10. C. F. Deng, D. Z. Wang, X. X. Zhang, and A. B. Li, Mater. Sci. Eng., A 444, 138(2007).
11. S. R. Bakshi, V. Singh, K. Balani, D. G. McCartney, S. Seal, and A. Agarwa, Surf. Coat. Technol. 202, 5162(2008).
12. T. Laha and A. Agarwal, Mater. Sci. Eng., A 480, 323(2008).
13. T. Laha, S. Kuchibhatla, S. Seal, W. Li, and A. Agarwal, Acta Mater. 55, 1059(2007).
14. T. Laha, A. Agarwal, T. McKechnie, and S. Seal, Mater. Sci. Eng., A 381, 249(2004).
15. R. George, K. T. Kashyap, R. Rahul, and S. Yamadagni, Scr. Mater. 53, 1159(2005).
16. A. M. K. Esawi and M. Borady, Compos. Sci. Technol. 68, 486(2008).
17. A. Esawi, K. Morsi, A. Sayed, A. Gawad, and P. Borah, Mater. Sci. Eng., A 508, 167(2009).
18. K. Morsi, A. El Desouky, B. Johnson, A. Mar, and S. Lanka, Scr. Mater. 61, 395(2009).
19. K. Morsi, A. M. K. Esawi, S. Lanka, A. Sayed, and M. Taher, Composites A 41, 322(2010).
20. J. P. Salvetat-Delmotte and A. Rubio, Carbon 40, 1729(2002).
21. C. L. Xu, B. Q. Wei, R. Z. Ma, J. Liang, X. K. Ma, and D. H. Wu, Carbon 37, 855(1993).
22. A. M. K. Esawi and K. Morsi, Composites A 38, 646(2007).
23. J. Hilding, E. A. Grulke, Z. G. Zhang, and F. Lockwood, J. Dispers. Sci. Technol. 1, 1(2003).
24. L. Wang, H. Choi, J. M. Myoung, and W. Lee, Carbon 47, 3427(2009).
25. http://en. wikipedia.org/wiki/Carbon-nanofiber
26. M. Endo, Y. A. Kim, T. Hayashi, K. Nishimura, T. Matusita, K. Miyashima, and M. S. Dresselhaus, Carbon 39, 1287(2001).
27. M. Endo, K. Takeuchi, K. Kobori, K. Takahashi, H. W. Kroto, and A. Sarkar, Carbon 33, 873(1995).
28. M. Endo, Y. A. Kim, T. Takeda, S. H. Hong, T. Matsushita, T. Hayashi, and M. S. Dresselhaus, Carbon 39, 2003(2001).
29. H. Kwon, M. Estili, K. Takagi, T. Miyazaki, and A. Kawasaki, Carbon 47, 570(2009).
30. H. Kwon and A. Kawasaki, J. Nanosci. Nanotechnol. 9, 6542(2009).
31. H. Kwon, D. Park, J. F. Silvain, and A. Kawasaki, Comp. Sci. Technol. 70, 546(2010).
32. T. Noguchi, A. Magario, S. Fukazawa, S. Shimizu, J. Beppu, and M. Seki, Mater. Trans. 45, 602(2004).
33. Q. Zhao and H. D. Wagner, Phil. Trans. R. Soc. A 362, 2407(2004).
34. M. S. Dresslhaus, G. D. Dresselhaus, R. Saito, and A. Jorio, Physics Reports 409, 47(2005).
35. M. Omori, Mater. Sci. Eng., A 287, 183(2000).
36. G. Xie, O. Ohashi, T. Yoshioka, M. Song, K. Mitsuishi, H. Yasuda, K. Furuya, and T. Noda, Mater. Trans. 42, 1846(2001).
37. G. Xie, O. Ohashi, K. Chiba, N. Yamaguchi, M. Song, K. Furuya, and T. Noda, Mater. Sci. Eng., A 359, 384(2003).
38. M. Kubota, J. Alloys Compd. 434, 294(2007).
39. M. Zadra, F. Casari, L. Girardini, and A. Molinari, Powder Metall. 50, 40(2007).
40. F. Montheillet and J. J. Jonas, Recrystallization, Dynamic, Encyclopedia of Applied Physics, VCH Publishers, Inc. (1996), Vol. 16, pp. 205-225.
41. S. Serajzadeh, Modelling Simul. Mater. Sci. Eng. 12, 1185(2004).
42. R. Kaibyshev, K. Shipilova, F. Musin, and Y. Motohashi, Mater. Sci. Eng., A 396, 341(2005).
43. A. Kelly and W. R. Tyson, J. Mech. Phys. Solids 13, 329(1965).
44. http://www.sdk.co.jp/html/english/index.html
45. K. T. Kim, S. I. Cha, and S. H. Hong, Mater. Sci. Eng., A 430, 27(2006).
46. H. L. Cox, Br. J. Appl. Phys. 3, 72(1952).
47. O. Lourie and H. D. Wagner, Comp. Sci. Technol. 59, 975(1999).
48. T. Nagae and S. T. Yokota, and M. Toyama, Industrial Technology Center 89, 89(2001).
49. P. W. Ruch, O. Beffort, S. Kleiner, L. Weber, and P. J. Uggowitzer, Comp. Sci. Technol. 66, 2677(2006).
50. L. Ci, Z. Ryu, N. Y. Jin-Phillipp, and M. Rühle, Acta Mater. 54, 5367(2006).
51. M. Lancin and C. Marhic, J. Eur. Ceram. Soc. 20, 1493(2000).
52. W. S. Jung and H. U. Joo, J. Alloys Compd. 465, 265(2008).