Investigation of fire behavior of rigid polyurethane foams containing fly ash and intumescent flame retardant by using a cone calorimeter

Journal of Applied Polymer Science

Volumn 124, Issue 4, 2012, Pages 3372-3382

  Usta, Nazim ^a  

^a PAMUKKALE UNIVERSITY   (Turkey)

Author keywords

calorimetry; fillers; flame retardance; intumescence; polyurethanes

Indexed keywords

AMMONIUM POLYPHOSPHATES; CONE CALORIMETER; FIRE BEHAVIOR; FIRE CONDITION; FLAME-RETARDANCE; INTUMESCENCE; INTUMESCENT FLAME RETARDANT; RESEARCH AND DEVELOPMENT; RIGID POLYURETHANE FOAMS;

AMMONIUM COMPOUNDS; BEHAVIORAL RESEARCH; CALORIMETRY; FILLERS; FIRE RESISTANCE; FIRES; FLY ASH; POLYURETHANES; RIGID FOAMED PLASTICS; THERMOGRAVIMETRIC ANALYSIS;

FLAME RETARDANTS;

EID: 84856711556     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.35352     Document Type: Article

References (81)

1. Brzozowski, B. K.,;, Pietruszka, N.,;, Gajewski, J.,;, Stankiewicz, R., Polimery (Warsaw) 1998, 43, 252.
2. Tang, Z.,;, Maroto-Valer, M. M.,;, Andresen, J. M.,;, Miller, J. W.,;, Listemann, M. L.,;, McDaniel, P. L.,;, Morita, D. K.,;, Furlan, W. R., Polymer 2002, 43, 6471.
3. Pielichowski, K.,;, Kulesza, K.,;, Pearce, E. M., J Polym Eng 2002, 22, 195.
4. Czuprynski, B.,;, Paciorek-Sadowska, J.,;, Liszkowska, J., Polimery (Warsaw) 2002, 47, 727.
5. Czuprynski, B.,;, Liszkowska, J.,;, Paciorek-Sadowska, J., Polimery (Warsaw) 2004, 49, 187.
6. Wang, J. Q.,;, Chow, W. K., J Appl Polym Sci 2005, 97, 366.
7. Modesti, M.,;, Zanella, L.,;, Lorenzetti, A.,;, Bertani, R.,;, Gleria, M., Polym Degrad Stab 2005, 87, 287.
8. Kulesza, K.,;, Pielichowski, K.,;, German, K., J Anal Appl Pyrolysis 2006, 76, 243.
9. Singh, B.,;, Gupta, M.,;, Tarannum, H., J Biobased Mater Bioenergy 2010, 4, 397.
10. Paciorek-Sadowska, J,;, Czuprynski, B.,;, Liszkowska, J.,;, Jaskolowski, W., Polimery (Warsaw) 2010, 55, 99.
11. Levchik, S. V.,;, Weil, E. D., Polym Int 2004, 53, 1585.
12. Weil, E. D.,;, Levchik, S. V., J Fire Sci 2004, 22, 183.
13. Lu, S. Y.,;, Hamerton, I., Prog Polym Sci 2002, 27, 1661.
14. Singh, H.,;, Jain, A. K., J Appl Polym Sci 2009, 111, 1115.
15. Tashev, E.,;, Zabski, L.,;, Shenkov, S.,;, Borissov, G., Eur Polym Mater 1992, 28, 689.
16. Modesti, M.,;, Simioni, F., Cell Polym 1994, 13, 277.
17. Prociak, A.,;, Pielichowski, J.,;, Modesti, M.,;, Simioni, F., Cell Polym 1997, 16, 284.
18. Prociak, A.,;, Pielichowski, J.,;, Modesti, M.,;, Simioni, F.,;, Checchin, M., Polimery (Warsaw) 2001, 46, 692.
19. Singh, H.,;, Jain, A. K.,;, Sharma, T. P., J Appl Polym Sci 2008, 109, 2718.
20. Thirumal, M.,;, Khastgir, D.,;, Singha, N. K.,;, Manjunath, B. S.,;, Naik, Y. P., J Macromol Sci Part A-Pure Appl Chem 2009, 46, 704.
21. Zatorski, W.,;, Brzozowski, Z. K.,;, Kolbrecki, A., Polym Degrad Stab 2008, 93, 2071.
22. Bastin, B.,;, Paleja, R.,;, Lefebvre, J., J Cell Plast 2003, 39, 323.
23. Thirumal, M.,;, Singha, N. K.,;, Khastgir, D.,;, Manjunath, B. S.,;, Naik, Y. P., J Appl Polym Sci 2010, 116, 2260.
24. Lv, P.,;, Wang, Z.,;, Hu, K.,;, Fan, W., Polym Degrad Stab 2005, 90, 523.
25. Zhang, J.,;, Wang, X.,;, Zhang, F.,;, Horrocks, A. R., Polym Test 2004, 23, 225.
26. Bahattab, M. A.,;, Mosnacek, J.,;, Basfar, A. A.,;, Shukri T. M., Polym Bull 2010, 64, 569.
27. Liu, S. M.,;, Huang, J. Y.,;, Jiang, Z. J.,;, Zhang, C.,;, Zhao, J. Q.,;, Chen, J., J Appl Polym Sci 2010, 117, 3370.
28. Bian, X. C.,;, Tang, J. H.,;, Li, Z. M., J Appl Polym Sci 2008, 109, 1935.
29. Modesti, M.,;, Lorenzetti, A., Polym Degrad Stab 2002, 78, 341.
30. Wang, J. C.,;, Chen, Y. H., J Fire Sci 2005, 23, 55.
31. Ni, J. X.,;, Song, L.,;, Hu, Y. A.,;, Zhang, P.,;, Xing, W. Y., Polym Adv Technol 2009, 20, 999.
32. Ni, J. X.,;, Tai, Q. L.,;, Lu, H. D.,;, Hu, Y. A.,;, Song, L., Polym Adv Technol 2010, 21, 392.
33. Barikani, M.,;, Askari, F.,;, Barmar, M., Cell Polym 2010, 29, 343.
34. Meng, X. Y.,;, Ye, L.,;, Zhang, X. G.,;, Tang, P. M.,;, Tang, J. H.,;, Ji, X.,;, Li, Z. M., J Appl Polym Sci 2009, 114, 853.
35. Shi, L.,;, Li, Z. M.,;, Xie, B. H.,;, Wang, J. H.,;, Tian, C. R.,;, Yang, M. B., Polym Int 2006, 55, 862.
36. Bian, X. C.,;, Tang, J. H.,;, Li, Z. M.,;, Lu, Z. Y.,;, Lu, A., J Appl Polym Sci 2007, 104, 3347.
37. Thirumal, M.,;, Singha, N. K.,;, Khastgir, D.,;, Manjunath, B. S.,;, Naik, Y. P., J Appl Polym Sci 2008, 110, 2586.
38. Ye, L.,;, Meng, X. Y.,;, Ji, X.,;, Li, Z. M.,;, Tang, J. H., Polym Degrad Stab 2009, 94, 971.
39. Modesti, M.,;, Lorenzetti, A.,;, Simioni, F.,;, Camino, G., Polym Degrad Stab 2002, 77, 195.
40. Shi, L.,;, Li, Z. M.,;, Yang, M. B.,;, Yin, B.,;, Zhou, Q. M.,;, Tian, C. R.,;, Wang, J. H., Polym Plast Technol Eng 2005, 44, 1323.
41. Thirumal, M.,;, Khastgir, D.,;, Nando, G. B.,;, Naik, Y. P.,;, Singha, N. K., Polym Degrad Stab 2010, 95, 1138.
42. Chaipanich, A.,;, Nochaiya, T.,;, Wongkeo, W.,;, Torkittikul, P., Mater Sci Eng A 2010, 527, 1063.
43. Soyama, M.,;, Inoue, K.,;, Iji, M., Polym Adv Technol 2007, 18, 386.
44. Vilches, L. F.,;, Fernandez-Pereira, C.,;, Olivares del Valle, J.,;, Rodríguez-Pinero, M. A.,;, Vale, J., J Chem Technol Biotechnol 2002, 77, 361.
45. Vilches, L. F.,;, Fernández-Pereira, C.,;, Olivares del Valle, J.,;, Vale, J., Chem Eng J 2003, 95, 155.
46. Gu, J.,;, Wu, G.,;, Zhang, Q., Mater Sci Eng A 2007, 452-453, 614.
47. Rama, S. R.,;, Rai, S. K., J Compos Mater 2009, 43, 3231.
48. Deepthi, M. V.,;, Sharma, M.,;, Sailaja, R. R. N.,;, Anantha, P.,;, Sampathkumaran, P.,;, Seetharamu, S., Mater Des 2010, 31, 2051.
49. Wu, G.,;, Gu, J.,;, Zhao, X., J Appl Polym Sci 2007, 105, 1118.
50. Guru, M.,;, Sahin, M.,;, Tekeli, S.,;, Tokgoz, H., High Temp Mater Process 2009, 28, 3, 191.
51. Guru, M.,;, Aruntas, Y.,;, Tuzun, F. N.,;, Bilici, I., Fire Mater 2009, 33, 413.
52. Mishra, S.,;, Sonawane, S. H.,;, Badgujar, N.,;, Gurav, K.,;, Patil, D., J Appl Polym Sci 2005, 96, 6.
53. Mishra, S.,;, Shimpi, N. G., Polym Plast Technol Eng 2008, 47, 72.
54. Shimpi, N. G.,;, Mishra, S., J Nanopart Res 2010, 2, 2093.
55. Mishra, S.,;, Patil, U. D.,;, Shimpi, N. G., Polym Plast Technol Eng 2009, 48, 1078.
56. Tarakcilar, A. R., J Appl Polym Sci 2011, 120, 2095.
57. UL 94 Standard, Test for flammability of plastic materials for parts in devices and appliances. Northbrook, IL: Underwriters Laboratories Inc., 1996.
58. Wu, K.,;, Wang, Z.,;, Hu, Y., Polym Adv Technol 2008, 19, 1118.
59. Beyer, G., J Fire Sci 2007, 25, 65.
60. Morgan, A. B.,;, Bundy, M., Fire Mater 2007, 31, 257.
61. Chung, Y.,;, Kim Y.,;, Kim S,. J Ind Eng Chem 2009, 15, 888.
62. BASF The Chem Company. Technical data sheet for Elastofoam I 4501/109 and Iso PMDI 92040 2005.
63. Demir, H.,;, Arkis, E.,;, Balkose, D.,;, Ulku, S., Polym Degrad Stab 2005, 89, 478.
64. ASTM E 1354. Standard Test Method for Heat and Visible Smoke Release Rates for Materials Using an Oxygen Consumption Calorimeter, ASTM International, West Conshohocken, PA, U.S.A. 2004.
65. ISO 5660. Reaction-to-fire tests e heat release, smoke production and mass loss rate. Geneva, Switzerland: ISO; 2002.
66. Bourbigot, S.,;, Samyn, F.,;, Turf, T.,;, Duquesne, S., Polym Degrad Stab 2010, 95, 320.
67. Gallina, G.,;, Bravin, E.,;, Badalucco, C.,;, Audisio, G.,;, Armanini, M.,;, De Chirico, A.,;, Provasoli, F., Fire Mater 1998, 22, 15.
68. He, S.,;, Hu, Y.,;, Song, L.,;, Tang, Y., J Fire Sci 2007, 25, 109.
69. Wang, L.,;, Wu, X.,;, Wu, C.,;, Yu, J.,;, Wang, G.,;, Jiang P,. J Appl Polym Sci 2011, 121, 68.
70. ASTM D3576-04, Standard Test Method for Cell Size of Rigid Cellular Plastics. ASTM International, West Conshohocken, PA, U.S.A., 2004.
71. Duquesne, S.,;, Le Bras, M.,;, Bourbigot, S.,;, Delobel, R.,;, Poutch, F.,;, Camino, G.,;, Eling, B.,;, Lindsay, C.,;, Roels, T., J Fire Sci 2000, 18, 456.
72. Duquesne, S.,;, Le Bras, M.,;, Bourbigot, S.,;, Delobel, R.,;, Camino, G.,;, Eling, B.,;, Lindsay, C.,;, Roels, T.,;, Vezin, H., J Appl Polym Sci 2001, 82, 3262.
73. Schartel, B.,;, Hull, T. R., Fire Mater 2007, 31, 327.
74. König, A.,;, Fehrenbacher, U.,;, Kroke, E.,;, Hirth, T., J Fire Sci 2009, 27, 187.
75. Checchin, M.,;, Cecchini, C.,;, Cellarosi, B.,;, Sam, F.O., Polym Degrad Stab 1999, 64, 573.
76. Valencia, L. B.,;, Rogaume, T.,;, Guillaume, E.,;, Rein, G.,;, Torero, J. L., Fire Saf J 2009, 44, 933.
77. Price, D.,;, Liu, Y.,;, Hull, T. R.,;, Milnes, G. J.,;, Kandola, B. K.,;, Horrocks, A. R., Polym Int 2000, 49, 1153.
78. Levchik, S. V., In Flame Retardant Polymer Nanocomposites, Morgan, A.B., Wilkie, C. A., Eds.; Wiley: New Jersey, 2007; Chapter 1.
79. Kang, J. W.,;, Kim, J. M.,;, Kim, M. S.,;, Kim, Y. H.,;, Kim, W. N., Macromol Res 2009, 17, 856.
80. Modesti, M.,;, Lorenzetti, A.,;, Besco, S., Polym Eng Sci 2007, 47, 1351.
81. Kim, S. H.,;, Lee, M. C.,;, Kim, H. D.,;, Park, H. C.,;, Jeong, H. M.,;, Yoon, K. S.,;, Kim, B. K., J Appl Polym Sci 2010, 117, 1992.