Jute sandwich composite panels for building applications

Journal of Biobased Materials and Bioenergy

Volumn 4, Issue 4, 2010, Pages 397-407

  Singh, B ^a   Gupta, M ^a   Tarannum, Hina ^a  

^a CSIR CENTRAL BUILDING RESEARCH INSTITUTE   (India)

Author keywords

Door shutters; Hybrid resin foam; Jute fibers; Panels; Sandwich composites

Indexed keywords

ADSORBED SPECIES; CALCIUM CARBONATE FILLERS; CELL ORIENTATION; CELL WALLS; COMPOSITE PANELS; CORE MATERIAL; FIRE PROPAGATION; FIRE RETARDANT; FLEXURAL STRENGTH; HYBRID NETWORK; HYBRID RESIN FOAM; INTERCELLULAR SPACES; JUTE FABRICS; JUTE FIBRE; JUTE-COMPOSITES; MELTING PEAK; NATURAL DECAY; NON-WOVEN; OPERATIONAL LOADS; OPTIMIZED LEVEL; PANELS; PHYSICOMECHANICAL PROPERTIES; SANDWICH COMPOSITE PANELS; SANDWICH COMPOSITES; SEM MORPHOLOGY; SUBTRACTION SPECTRA; UNSATURATED POLYESTER; WEIGHT LOSS; WOODEN DOOR;

BIOMECHANICS; BLOWING AGENTS; CALCIUM CARBONATE; COREMAKING; COUPLING AGENTS; DIMENSIONAL STABILITY; DOORS; FOAMS; LAMINATES; MECHANICAL PROPERTIES; MORPHOLOGY; RESINS; TENSILE STRENGTH;

JUTE FIBERS;

CALCIUM CARBONATE; COMPOSITES; COUPLING AGENTS; FIBERS; FUNGI; JUTE; LAMINATES; MECHANICAL PROPERTIES; SANDWICH STRUCTURES; STRUCTURAL DESIGN; SYNTHETIC POLYMERS; TENSILE STRENGTH;

EID: 79955459522     PISSN: 15566560     EISSN: 15566579     Source Type: Journal    
DOI: 10.1166/jbmb.2010.1110     Document Type: Article

References (39)

1. A. G. Winfield, Plast. Rub. Intl. 4, 23 (1979).
2. M. A. Semsarzadeh, A. R. Lotfali, and H. Mirzadeh, Polym. Compos. 5, 141 (1984).
3. P. K. Pal and S. R. Ranganathan, Pop. Plast. 31, 22 (1986).
4. H. Belmares, A. Barrera, E. Castillo, V. E. Verheugen, M. Monjaras, G. A. Patfoort, and M. E. N. Bucquoye, Ind. Eng. Chem. Prod. Res. Dev. 20, 555 (1981).
5. A. R. Sanadi, S. V. Parsad, and P. K. Rohatgi, J. Mater. Sci. 21, 4299 (1986).
6. S. D. Varma, M. Varma, and I. K. Varma, Tex. Res. J. 54, 827 (1984).
7. E. T. N. Bisanda, J. Mater. Proc. Technol. 38, 369 (1993).
8. M. J. A. Van den Oever and M. H. B. Snijder, J. Appl. Polym. Sci. 110, 1009 (2008).
9. K. S. Ahmad and S. Vijayarangan, J. Appl. Polym. Sci. 104, 2650 (2007).
10. K. G. Satyanarayana, K. Sukumaran, P. S. Mukharjee, C. Pavitharan, and S. G. K. Pillai, Cem. Concr. Compos. 12, 117 (1990).
11. I. O. Salyer and A. M. Usmani, Ind. Eng. Chem. Prod. Res. Dev. 21, 17 (1982).
12. P. Zoderecki and P. Foldin, J. Appl. Polym. Sci. 30, 3971 (1985).
13. M. A. Khan and S. K. Bhattacharia, J. Reinf. Plast. Compos. 26, 617 (2007).
14. D. Ray and B. K. Sarkar, J. Appl. Polym. Sci. 94, 123 (2004).
15. M. A. Khan and M. Hassan, J. Appl. Polym. Sci. 100, 4142 (2006).
16. A. A. Kan and B. Abedin, J. Reinf. Plast. Compos. 25, 575 (2006).
17. I. K. Verma, S. R. Anathakrishnan, and S. Krishnamarthy, Composites 20, 383 (1989).
18. J. Gasssan and A. K. Bledzki, Compos. Sci. Technol. 59, 1303 (1999).
19. A. K. Mohanty, M. A. Khan, and G. Hinrichsen, Compos. Sci. Technol. 30. 1115 (2000).
20. P. J. Roe and M. P. Ansell, J. Mater. Sci. 20, 4015 (1985).
21. A. K. Mohanty and M. Mishra, Polym.-Plast. Technol. Eng. 34, 729 (1995).
22. A. K. Saha, S. Das, D. Bhatta, and B. C. Mitra, J. Appl. Polym. Sci. 71, 1505 (1999).
23. S. I. Mavani, N. M. Mehta, and P. H. Parsania, J. Appl. Polym. Sci. 106, 1228 (2007).
24. B. N. Dash, A. K. Rana, H. K. Mishra, S. K. Nayak, S. C. Mishra, and S. S. Tripathy, Polym. Compos. 20, 62 (1999).
25. E. Sinha and S. K. Rout, J. Mater. Sci. 43, 2590 (2008).
26. M. Gupta, A. Randhawa, and B. Singh. Jute composites: Properties and end use in buildings, Proceedings of Intl Sem. on Waste to Wealth, New Delhi, November (2009).
27. R. N. Mukherjee, S. K. Sanyal, and S. K. Pal, J. Appl. Poly. Sci. 28, 3029 (1983).
28. B. C. Mitra, R. K. Basak, and M. Sarkar, J. Appl. Sci. 67, 1093 (1998).
29. R. A. Clark and M. P. Ansell, J. Mater. Sci. 21, 269 (1986).
30. B. Singh and M. Gupta, Book of Natural Fibres, Biopolymers and Biocomposites, edited by A. K. Mohanty, M. Misra, and L. T. Drzal, CRC Press, Taylor & Francis Group, Boca Raton (2005), pp. 261-290.
31. B. Singh and M. Gupta, J. Polym. Environ. 13, 2, 127 (2005).
32. B. Singh, M. Gupta, and A. Verma, Compos. Sci. Technol. 60, 581 (2000).
33. D. P. Goyal, Technical evaluation of acceptability of ligno-cellulosic panel products for buildings, Proceedings of the National Conference on Standardization and Quality Upgradation of Lignocellulosic Panel Products, New Delhi, December (1992).
34. IS: 11239, Indian Standard Methods of test for rigid cellular thermal insulation materials (Indian Standard Institutions, New Delhi, 110002) (1985).
35. IS: 4020, Indian Standard: Door Shutters-Methods of tests (Indian Standard Institutions, New Delhi, 110002) (1998).
36. M. Gupta, A. Verma, and B. Singh, Current Science 74, 526 (1998).
37. J. F. Jin, Y. L. Chen, D. N. Wang, C. P. Hu, S. Zhu, L. Vanoverloop, and D. Randall, J. Appi. Polym. Sci. 84, 598 (2002).
38. Report No. O (G)/0002 on Development of composites and moulded products fro jute and allied fibres, CBRI (2005).
39. L. Valette and C. P. Hsu, Polymer 40, 2059 (1999).