Formulation of an aqueous titania suspension and its patterning with ink-jet printing technology

Journal of the American Ceramic Society

Volumn 95, Issue 2, 2012, Pages 487-493

  Kuscer, Danjela ^a,b   Stavber, Gaj ^a,c   Trefalt, Gregor ^a,b   Kosec, Marija ^a,b  

^a JO EF STEFAN INSTITUTE   (Slovenia)

^b Centre of Excellence NAMASTE   (Slovenia)

^c Lek Research and Development C20   (Slovenia)

Author keywords

[No Author keywords available]

Indexed keywords

BALL MILLING PROCESS; CRITICAL ISSUES; ENVIRONMENTALLY BENIGN; FLUID PROPERTY; INK-JET; METAL-OXIDE; NANO-SIZED PARTICLES; NANOSTRUCTURED PARTICLES; NONIONIC; NOZZLE DIAMETER; PIEZOELECTRIC INK JETS; POSITIONING ACCURACY; TIO; TITANIA; WATER BASED; Z VALUE;

BALL MILLING; FLUIDS; GLYCEROL; INK JET PRINTERS; MILLING (MACHINING); PIEZOELECTRICITY; PRINTING PRESSES; SUBSTRATES; SURFACE TENSION; SUSPENSIONS (FLUIDS); TITANIUM DIOXIDE;

INK JET PRINTING;

EID: 84856528510     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2011.04876.x     Document Type: Article

References (50)

1. M. A. M. Leenen, V. Arning, H. Thiem, J. Steiger, and, R. Anselmann, " Printable Electronics: Flexibility for the Future," Phys. Status Solidi A, 206, 588-97 (2009).
2. Z. Fan, J. C. Ho, T. Takahashi, R. Yerushalmi, K. Takei, A. C. Ford, Y. Cheuh, and, A. Javey, " Toward Development of Printable Nanowire Electronics and Sensors," Adv. Mater., 21, 3730-43 (2009).
3. M. Singh, H. M. Haverinen, P. Dhagat, and, G. E. Jabbour, " Inkjet Printing-Process and its Applications," Adv. Mater., 22, 673-85 (2010).
4. P. Calvert, " Inkjet Printing for Materials and Devices," Chem. Mater., 13, 3299-305 (2001). (Pubitemid 32999277)
5. E. Tekin, P. J. Smith, and, U. S. Schubert, " Inkjet Printing as a Deposition and Patterning Tool for Polymers and Inorganic Particles," Soft Matter, 4, 703-13 (2008). (Pubitemid 351434075)
6. S. Magdassi, The Chemistry of Inkjet Inks, World Scientific Publishing Co., Singapore, 2010.
7. A. Pique, and, D. B. Chrisey, Direct Write Technologies for Rapid Protoyping Applications: Sensors, Electronics, and Integrated Power Sources, Academic Press, San Diego, USA, 2002.
8. B. Derby, and, N. Reis, " Ink-jet Printing of Highly Loaded Particulate Suspensions," MRS Bull., 28, 815-8 (2003).
9. J. E. Smay, J. Cesarano III, and, J. A. Lewis, " Colloidal Inks for Direct Assembly of 3-D Periodic Structures," Langmuir, 18, 5429-37 (2002). (Pubitemid 35383446)
10. M. Lejeune, T. Chartier, C. Dossou-Yovo, and, R. Noguera, " Ink-jet Printing of Ceramic Micro-Pillar Arrays," J. Eur. Ceram. Soc., 29 [ 5 ] 905-11 (2009).
11. J. E. Fromm, " Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets," IBM J. Res. Dev., 28, 322-33 (1984). (Pubitemid 14602745)
12. R. Noguera, M. Lejeune, and, T. Chartier, " 3D Fine Scale Ceramic Components Formed by ink-jet Prototyping Process," J. Eur. Ceram. Soc., 25 [ 12 ] 2055-9 (2005). (Pubitemid 40829590)
13. D. Jang, D. Kim, and, J. Moon, " Influence of Fluid Physical Properties on Ink-Jet Printability," Langmuir, 25, 2629-35 (2009).
14. T. Anastas, and, J. C. Warner, Green Chemistry: Theory and Practice. Oxford University Press, New York, 1998.
15. 3Powders Through Peroxide Intermediates in Water," Green Chem., 13, 1303-10 (2011).
16. J. A. Dahl, B. L. S. Maddux, and, J. E. Hutchison, " Toward Greener Nanosynthesis," Chem. Rev., 107, 2228-69 (2007). (Pubitemid 47029093)
17. J. M. Patete, X. Peng, C. Koenigsmann, Y. Xu, B. Karn, and, S. S. Wong, " Viable Methodologies for the Synthesis of High-Quality Nanostructures," Green Chem., 13, 482 (2011).
18. A. O'Neil, and, J. J. Watkins, " Green Chemistry in the Microelectronics Industry," Green Chem., 6, 363-8 (2004). (Pubitemid 39420829)
19. M. Poliakoff, J. M. Fizpatrick, T. R. Farren, and, P. T. Anastas, " Green Chemistry: Science and Politics of Change," Science, 297, 807-10 (2002). (Pubitemid 34839624)
20. X. Zhao, J. R. G. Evans, and, M. J. Edirisinghe, " Direct ink-jet Printing of Vertical Walls," J. Am. Ceram. Soc., 85 [ 8 ] 2113-5 (2002).
21. K. A. M. Seerden, N. Reis, J. R. G. Evans, P. S. Grant, J. W. Halloran, and, B. Derby, " Ink-jet Printing of wax-Based Alumina Suspensions," J. Am. Ceram. Soc., 84 [ 11 ] 2514-20 (2001). (Pubitemid 33670247)
22. T. Wang, and, B. Derby, " Ink-jet Printing and Sintering of PZT," J. Am. Ceram. Soc., 88 [ 8 ] 2053-8 (2005). (Pubitemid 41557822)
23. M. A. Sukeshini, R. Cummins, T. L. Reitz, and, R. M. Miller, " Ink-jet Printing: A Versatile Method for Multilayer Solid Oxide Fuel Cells Fabrication," J. Am. Ceram. Soc., 92 [ 12 ] 2913-9 (2009).
24. R. I. Tomov, M. Krauz, J. Jewulski, S. C. Hopkins, J. R. Kluczowski, D. M. Glowacka, and, B. A. Glowacki, " Direct Ceramic Inkjet Printing of Yttria-Stabilized Zirconia Electrolyte Layers for Anode-Supported Solid Oxide Fuel Cells," J. Power Sources, 195, 7160-7 (2010).
25. K. Woo, D. Kim, J. S. Kim, S. Lim, and, J. Moon, " Ink-jet Printing of Cu-Ag Based Highly Conductive Tracks on a Transparent Substrate," Langmuir, 25, 429-33 (2009).
26. 3Thick Films via Direct Inkjet Printing," J. Electroceram., 16, 537-40 (2006).
27. D. H. Lee, and, B. Derby, " Preparation of PZT Suspensions for Direct Ink Jet Printing," J. Eur. Ceram. Soc., 24, 1069-72 (2004). (Pubitemid 38143686)
28. M. Mott, and, J. R. G. Evans, " Solid Freeforming of Siolicon Carbide by Inkjet Printing Using a Polymeric Precursor," J. Am. Ceram. Soc., 84 [ 2 ] 307-13 (2001). (Pubitemid 32253093)
29. S. Danu, and, D. Marsongko, " UV-Curing of Titanium Disoxide Pigmented Epoxy Acrylate Coating on Ceramic Ties," J. Ceram. Soc. Jpn., 116 [ 8 ] 896-903 (2008).
30. J. W. Halloran, V. Tomeckova, S. Gentry, S. Das, P. Cilino, D. Yuan, R. Guo, A. Rudraraju, P. Shao, T. Wu, T. R. Alabi, W. Baker, D. Legdzina, D. Wolski, W. R. Zimbeck, and, D. Long, " Photopolymerization of Powder Suspensions for Shaping Ceramics," J. Eur. Ceram. Soc., 31, 2613-9 (2011).
31. F. Bauer, R. Flyunt, K. Czihal, H. Ernst, S. Naumov, and, M. R. Buchmeister, " UV Curing of Nanoparticle Reinforced Acrylates," Nuclear Instr. Methods Phys. Res. B, 265, 87-91 (2007). (Pubitemid 350102652)
32. A. M. J. van den Berg, A. W. M. de Laat, P. J. Smith, J. Perelaer, and, U. S. Schubert, " Geometric Control of Inkjet Printed Features Using a Gelating Polymer," J. Mater. Chem., 17, 677-83 (2007).
33. W. Voit, W. Zapka, L. Belova, and, K. V. Rao, " Application of Inkjet Technology for the Deposition of Magnetic Nanoparticles to Form Micron-Scale Structures," Proc. Sci. Meas. Technol., 150, 252-6 (2003).
34. B. Cappi, E. Ozkol, J. Ebert, and, R. Telle, " Direct Inkjet Printing of Si3N4: Characterization of ink, Green Bodies and Microstructure," J. Eur. Ceram. Soc., 28, 2625-8 (2008).
35. 3Dielectric Films by Direct ink-jet Printing," Ceram. Int., 30, 1885-7 (2004).
36. 2Suspension Preparation and Novel Application of ink-jet Printing Technique for Ceramics Patterning," J. Mater. Sci. Lett., 2, 141-4 (1998).
37. D. Astruc, F. Lu, and, J. R. Aranzaes, " Nanoparticles as Recyclable Catalysts: The Frontier Between Homogeneous and Heterogeneous Catalysis," Angew. Chem., 44 [ 48 ] 7852-72 (2005). (Pubitemid 41818885)
38. T. L. Greaves, and, C. J. Drummond, " Ionic Liquids as Amphiphile Self-Assembly Media," Chem. Soc. Rev., 37, 1709-26 (2008).
39. 2Powders for the Abatement of the Bacteria (E. Coli) Undersolar Simulated Light: Influence on the Isoelectric Point," Appl. Catal. B, Environ., 63, 76-84 (2006). (Pubitemid 43247430)
40. 2Nanoparticle Dispersions," Chem. Eng. Sci., 66, 3482-90 (2011).
41. A. Michelmore, W. Gong, P. Jenkins, and, J. Ralston, " The Interaction of Linear Polyphosphates with Titanium Dioxyde Surfaces," Phys. Chem. Chem. Phys., 2, 2985-92 (2000).
42. K. Suttiponparnit, J. Jiang, M. Sahu, S. Suvachittanont, T. Charinpanitkul, and, P. Biswas, " Role of Surface Area, Primary Particle Size, and Crystal Phase on Titanium Dioxide Nanoparticle Dispersion Properties," Nanoscale Res. Lett., 6 [ 27 ] 1-8 (2011).
43. 4," J. Mol. Catal. A: Chemical, 319, 46-51 (2010).
44. T. Chartier, S. Souchard, J. F. Baumard, and, H. Vesteghem, " Degradation of Dispersant During Milling," J. Eur. Ceram. Soc., 16 [ 12 ] 1283-91 (1996). (Pubitemid 126402535)
45. D. Houivet, J. El Fallah, and, J. M. Haussonne, " Dispersion and Grinding of Oxide Powders into an Aqueous Slurry," J. Am. Ceram. Soc., 85 [ 2 ] 321-8 (2002).
46. Y. S. Lee, Self-Assembly and Nanotechnology: A Force Balance Approach. John Wiley & Sons, New Jersey, 2008.
47. K. R. Lange, (ed.), Surfactants: A Practical Handbook, Carl Hanser Pub., Munich, 1999.
48. R. D. Deegan, O. Bakajin, T. F. Dupont, G. Huber, S. R. Nagel, and, T. A. Witten, " Capillary Flowasthe Cause of Ring Stains From Dried Liquid Drops," Nature, 389, 827-9 (1997). (Pubitemid 27462971)
49. M. Pagliaro, and, M. Rossi, The Future of Glycerol. The Royal Society of Chemistry, Cambridge, UK, 2010.
50. R. Carr, R. E. Townsend, and, W. L. Badger, " Vapor Pressures of Glycerol-Water and Glycerol-Water-Sodium Chloride Systems," Ind. Eng. Chem., 17 [ 6 ] 643-6 (1925).