Edge-loading severity as a function of cup lip radius in metal-on-metal total hips-A finite element analysis

Journal of Orthopaedic Research

Volumn 30, Issue 2, 2012, Pages 169-177

  Elkins, Jacob M ^a,b   Kruger, Karen M ^a,b   Pedersen, Douglas R ^a,b   Callaghan, John J ^a,b,c   Brown, Thomas D ^a,b  

^a UNIVERSITY OF IOWA   (United States)

^b UNIVERSITY OF IOWA   (United States)

^c VETERANS AFFAIRS MEDICAL CENTER   (United States)

Author keywords

finite element; metal on metal; subluxation; total hip arthroplasty; wear

Indexed keywords

METAL; POLYETHYLENE;

ACETABULUM; ARTICLE; FEMUR HEAD; FINITE ELEMENT ANALYSIS; MECHANICAL STRESS; PRIORITY JOURNAL; RANGE OF MOTION; SUBLUXATION; TOTAL HIP PROSTHESIS; WEIGHT BEARING;

ARTHROPLASTY, REPLACEMENT, HIP; FINITE ELEMENT ANALYSIS; HIP JOINT; HUMANS; METALS; RANGE OF MOTION, ARTICULAR; STRESS, MECHANICAL;

EID: 83855162881     PISSN: 07360266     EISSN: 1554527X     Source Type: Journal    
DOI: 10.1002/jor.21524     Document Type: Article

References (36)

1. Bozic KJ, Kurtz S, Lau E, et al. 2009. The epidemiology of bearing surface usage in total hip arthroplasty in the United States. J Bone Joint Surg Am 91: 1614-1620.
2. Girard J, Bocquet D, Autissier G, et al. 2010. Metal-on-metal hip arthroplasty in patients thirty years of age or younger. J Bone Joint Surg Am 92: 2419-2426.
3. Zywiel MG, Sayeed SA, Johnson AJ, et al. 2011. Survival of hard-on-hard bearings in total hip arthroplasty: A systematic review. Clin Orthop Relat Res [Epub ahead of print].
4. Amstutz HC, Grigoris P,. 1996. Metal on metal bearings in hip arthroplasty. Clin Orthop Relat Res 329 (Suppl): S11-S34.
5. De Haan R, Pattyn C, Gill HS, et al. 2008. Correlation between inclination of the acetabular component and metal ion levels in metal-on-metal hip resurfacing replacement. J Bone Joint Surg Br 90: 1291-1297.
6. Griffin WL, Nanson CJ, Springer BD, et al. 2010. Reduced articular surface of one-piece cups: A cause of runaway wear and early failure. Clin Orthop Relat Res 468: 2328-2332.
7. Hosman AH, van der Mei HC, Bulstra SK, et al. 2010. Effects of metal-on-metal wear on the host immune system and infection in hip arthroplasty. Acta Orthop 81: 526-534.
8. Silva M, Heisel C, Schmalzried TP,. 2005. Metal-on-metal total hip replacement. Clin Orthop Relat Res 430: 53-61. (Pubitemid 40096132)
9. Pandit H, Glyn-Jones S, McLardy-Smith P, et al. 2008. Pseudotumours associated with metal-on-metal hip resurfacings. J Bone Joint Surg Br 90: 847-851. (Pubitemid 352009768)
10. Udofia IJ, Yew A, Jin ZM,. 2004. Contact mechanics analysis of metal-on-metal hip resurfacing prostheses. Proc Inst Mech Eng H 218: 293-305.
11. Lusty PJ, Watson A, Tuke MA, et al. 2007. Wear and acetabular component orientation in third generation alumina-on-alumina ceramic bearings: An analysis of 33 retrievals. J Bone Joint Surg Br 89: 1158-1164. (Pubitemid 350057952)
12. Brodner W, Grübl A, Jankovsky R, et al. 2004. Cup inclination and serum concentration of cobalt and chromium after metal-on-metal total hip arthroplasty. J Arthroplasty 19: 66-70. (Pubitemid 39575831)
13. Khan M, Kuiper JH, Richardson J,. 2008. The exercise-related rise in plasma cobalt levels after metal-on-metal hip resurfacing arthroplasty. J Bone Joint Surg Br 90: 1152-1157.
14. Williams S, Leslie I, Isaac G, et al. 2008. Tribology and wear of metal-on-metal hip prostheses: Influence of cup angle and head position. J Bone Joint Surg Am 90 (Supp3): 111-117.
15. Langton D, Jameson S, Joyce T, et al. 2010. Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear. J Bone Joint Surg Br 92: 38-46.
16. Bernstein M, Walsh A, Petit A, et al. Femoral head size does not affect ion values in metal-on-metal total hips. Clin Orthop Relat Res 469: 1642-1650.
17. Leslie I, Williams S, Brown C, et al. 2008. Effect of bearing size on the long-term wear, wear debris, and ion levels of large diameter metal-on-metal hip replacements? An in vitro study. J Biomed Mater Res, Part B 87B: 163-172.
18. Leslie IJ, Williams S, Isaac G, et al. 2009. High cup angle and microseparation increase the wear of hip surface replacements. Clin Orthop Relat Res 467: 2259-2265.
19. Al-Hajjar M, Leslie IJ, Tipper J, et al. 2010. Effect of cup inclination angle during microseparation and rim loading on the wear of Biolox Delta ceramic-on-ceramic total hip replacement. J Biomed Mater Res, Part B 95: 263-268.
20. Mak MM, Besong AA, Jin ZM, et al. 2002. Effect of microseparation on contact mechanics in ceramic-on-ceramic hip joint replacements. Proc Inst Mech Eng H 216: 403-408. (Pubitemid 35465814)
21. Mak M, Jin Z, Fisher J, et al. 2011. Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses. J Arthroplasty 26: 131-136.
22. Elkins JM, O'Brien MK, Stroud NJ, et al. 2011. Hard-on-hard total hip impingement causes extreme contact stress concentrations. Clin Orthop Relat Res 469: 454-463.
23. Elkins JM, Stroud NJ, Rudert MJ, et al. 2011. The capsule's contribution to total hip construct stability-A finite element analysis. J Orthop Res DOI: 10.1002/jor.21435.
24. Antoine J, Visa C, Sauvey C, et al. 2006. Approximate analytical model for Hertzian elliptical contact problems. J Tribol 128: 660-664. (Pubitemid 44323603)
25. Murray D,. 1993. The definition and measurement of acetabular orientation. J Bone Joint Surg Br 75: 228-232. (Pubitemid 23087178)
26. Brockett C, Williams S, Jin Z, et al. 2007. Friction of total hip replacements with different bearings and loading conditions. J Biomed Mater Res, Part B 81: 508-515. (Pubitemid 46685121)
27. Pedersen DR, Callaghan JJ, Brown TD,. 2005. Activity-dependence of the "safe zone" for impingement versus dislocation avoidance. Med Eng Phys 27: 323-328. (Pubitemid 40488773)
28. Nadzadi ME, Pedersen DR, Yack HJ, et al. 2003. Kinematics, kinetics, and finite element analysis of commonplace maneuvers at risk for total hip dislocation. J Biomech 36: 577-591. (Pubitemid 36207588)
29. Archard J,. 1953. Contact and rubbing of flat surfaces. J Appl Phys 24: 981-988.
30. ASTM F-799-95. 1995. Standard specification for cobalt-28 chromium-6 molybdenum alloy forgings for surgical implants. Am Soc Test Mater 13.01: 230-232.
31. Johansson HR, Johnson AJ, Zywiel MG, et al. Does acetabular inclination angle affect survivorship of alumina-ceramic articulations? Clin Orthop Relat Res 469: 1560-1566.
32. Walter WL, Insley GM, Walter WK, et al. 2004. Edge loading in third generation alumina ceramic-on-ceramic bearings: Stripe wear. J Arthroplasty 19: 402-413. (Pubitemid 38725921)
33. Scifert CF, Noble PC, Brown TD, et al. 2001. Experimental and computational simulation of total hip arthroplasty dislocation. Orthop Clin North Am 32: 553-567, vii. (Pubitemid 33136272)
34. Lewinnek GE, Lewis JL, Tarr R, et al. 1978. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am 60: 217-220. (Pubitemid 8311727)
35. Sariali E, Lazennec JY, Khiami F, et al. 2009. Mathematical evaluation of jumping distance in total hip arthroplasty: Influence of abduction angle, femoral head offset, and head diameter. Acta Orthop 80: 277-282.
36. Berry DJ, von Knoch M, Schleck CD, et al. 2005. Effect of femoral head diameter and operative approach on risk of dislocation after primary total hip arthroplasty. J Bone Joint Surg Am 87: 2456-2463. (Pubitemid 41546376)