Morphology and properties of thermoplastic sugar beet pulp and poly(butylene adipate-co-terepthalate) blends

Industrial and Engineering Chemistry Research

Volumn 50, Issue 24, 2011, Pages 13859-13865

  Liu, Bo ^a   Bhaladhare, Sachin ^a   Zhan, Peng ^a   Jiang, Long ^a   Zhang, Jinwen ^a   Liu, Linshu ^b   Hotchkiss, Arland T ^b  

^a Washington State University   (United States)

^b EASTERN REGIONAL RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIISOCYANATES; MOISTURE RESISTANCE; PHASE MORPHOLOGY; PRESENCE OF WATER; RHEOLOGICAL PROPERTY; SINGLE PROCESS; SUGAR BEET PULP;

BUTENES; COMPOUNDING (CHEMICAL); DISPERSIONS; EXTRUSION; GLYCEROL; METHANE; MORPHOLOGY; POLYMER BLENDS; REINFORCED PLASTICS; RHEOLOGY; SUGAR BEETS; SUGARS; WATER ABSORPTION;

MECHANICAL PROPERTIES;

EID: 83655172615     PISSN: 08885885     EISSN: 15205045     Source Type: Journal    
DOI: 10.1021/ie2017948     Document Type: Article

References (28)

1. Hotchkiss, A.; Fishman, M.; Liu, L. S. The role of sugar beet pulp polysaccharides in the sustainability of the sugar beet industry. In Eggleston, G., Ed.; ACS Symposium Series Volume 1058; American Chemical Society: Washington, DC, 2010; Chapter 17, p 283.
2. Fishman, M. L.; Chau, H. K.; Coffin, D. R.; Cooke, P. H.; Qi, P.; Yadav, M. P.; Hotchkiss, A. T. Physico-chemical characterization of a cellulosic fraction from sugar beet pulp Cellulose 2011, 18, 787
3. Vaccari, G.; Nicolucci, C.; Mantovani, G.; Monegato, A. Process for manufacturing paper from sugar-beet pulp and paper thus obtained. EP Patent 0,644,293, 1998.
4. Buchholt, H. C.; Christensen, T. M. I. E.; Fallesen, B.; Ralet, M. C.; Thibault, J. F. Preparation and properties of enzymatically and chemically modified sugar beet pectins Carbohydr. Polym. 2004, 58, 149
5. Kuuva, T.; Lantto, R.; Reinikainen, T.; Buchert, J.; Autio, K. Rheological properties of laccase-induced sugar beet pectin gels Food Hydrocoll. 2003, 17, 679
6. Norsker, M.; Jensen, M.; Adler-Nissen, J. Enzymatic gelation of sugar beet pectin in food products Food Hydrocoll. 2000, 14, 237
7. Fishman, M. L.; Chau, H. K.; Cooke, P. H.; Yadav, M. P.; Hotchkiss, A. T. Physico-chemical characterization of alkaline soluble polysaccharides from sugar beet pulp Food Hydrocoll. 2009, 23, 1554
8. Dufresne, A.; Cavaillé, J. Y.; Vignon, M. R. Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils J. Appl. Polym. Sci. 1997, 64, 1185
9. Leitner, J.; Hinterstoisser, B.; Wastyn, M.; Keckes, J.; Gindl, W. Sugar beet cellulose nanofibril-reinforced composites Cellulose 2007, 14, 419
10. Samir, M. A. S. A.; Alloin, F.; Paillet, M.; Dufresne, A. Tangling effect in fibrillated cellulose reinforced nanocomposites Macromolecules 2004, 37, 4313
11. Rouilly, A.; Jorda, J.; Rigal, L. Thermo-mechanical processing of sugar beet pulp. I. Twin-screw extrusion process Carbohydr. Polym. 2006, 66, 81
12. Rouilly, A.; Geneau-Sbarta, C.; Rigal, L. Thermo-mechanical processing of sugar beet pulp. III. Study of extruded films improvement with various plasticizers and cross-linkers Bioresour. Technol. 2009, 100, 3076
13. Liu, B.; Zhang, J.; Liu, L.; Hotchkiss, A. T. Preparation and properties of water and glycerol-plasticized sugar beet pulp plastics J. Polym. Environ. 2011, 19, 559
14. Chen, F.; Liu, L. S.; Cooke, P. H.; Hicks, K. B.; Zhang, J. Performance enhancement of poly (lactic acid) and sugar beet pulp composites by improving interfacial adhesion and penetration Ind. Eng. Chem. Res. 2008, 47, 8667
15. Liu, L. S.; Fishman, M. L.; Hicks, K. B.; Liu, C. K. Biodegradable composites from sugar beet pulp and poly (lactic acid) J. Agric. Food Chem. 2005, 53, 9017
16. Liu, L.; Finkenstadt, V.; Liu, C. K.; Coffin, D.; Willett, J.; Fishman, M.; Hicks, K. Green Composites from Sugar Beet Pulp and Poly (lactic acid): Structural and Mechanical Characterization J. Biobased Mater.Bioenergy 2007, 1, 323
17. Finkenstadt, V.; Liu, C. K.; Cooke, P.; Liu, L.; Willett, J. Mechanical property characterization of plasticized sugar beet pulp and poly (lactic acid) green composites using acoustic emission and confocal microscopy J. Polym. Environ. 2008, 16, 19
18. Chen, F.; Zhang, J. Effects of plasticization and shear stress on phase structure development and properties of soy protein blends ACS Appl. Mater. Interfaces 2010, 2, 3324
19. Chen, F.; Zhang, J. A new approach for morphology control of poly (butylene adipate-co-terephthalate) and soy protein blends Polymer 2009, 50, 3770
20. Chen, F.; Zhang, J. In-situ poly (butylene adipate-co-terephthalate)/soy protein concentrate composites: Effects of compatibilization and composition on properties Polymer 2010, 51, 1812
21. Liu, B.; Jiang, L.; Liu, H.; Zhang, J. Synergetic effect of dual compatibilizers on in situ formed poly (lactic acid)/soy protein composites Ind. Eng. Chem. Res. 2010, 6399
22. Reddy, M.; Mohanty, A. K.; Misra, M. Thermoplastics from Soy Protein: A Review on Processing, Blends and Composites J. Biobased Mater. Bioenergy 2010, 4, 298
23. Liu, B.; Jiang, L.; Liu, H.; Sun, L.; Zhang, J. Different effects of water and glycerol on morphology and properties of poly (lactic acid)/soy protein concentrate blends Macromol. Mater. Eng. 2010, 295, 123
24. Zhang, J.; Jiang, L.; Zhu, L.; Jane, J.; Mungara, P. Morphology and properties of soy protein and polylactide blends Biomacromolecules 2006, 7, 1551
25. Jiang, L.; Liu, B.; Zhang, J. Novel High Strength Thermoplastic Starch Reinforced by in situ Poly (lactic acid) Fibrillation Macromol. Mater. Eng. 2009, 294, 301
26. Sundararaj, U.; Macosko, C.; Rolando, R.; Chan, H. Morphology development in polymer blends Polym. Eng. Sci. 1992, 32, 1814
27. Utracki, L.; Shi, Z. Development of polymer blend morphology during compounding in a twin screw extruder. Part I: Droplet dispersion and coalescence - a review Polym. Eng. Sci. 1992, 32, 1824
28. Sundararaj, U.; Macosko, C. Drop breakup and coalescence in polymer blends: The effects of concentration and compatibilization Macromolecules 1995, 28, 2647