High-temperature tribological and self-lubricating behavior of copper oxide-doped Y-TZP composite sliding against alumina

Journal of the American Ceramic Society

Volumn 94, Issue 12, 2011, Pages 4426-4434

  Valefi, Mahdiar ^a   De Rooij, Matthijn ^a   Schipper, Dirk J ^a   Winnubst, Louis ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

A-COEFFICIENT; COUNTER-FACE MATERIALS; FRICTION AND WEAR; HIGH TEMPERATURE; HIGH TEMPERATURE CONDITION; HIGHER TEMPERATURES; OPERATIONAL CONDITIONS; SELF-LUBRICATING; SELF-LUBRICATING BEHAVIOR; TETRAGONAL ZIRCONIA POLYCRYSTAL; TRIBOLOGICAL BEHAVIORS; WEAR MECHANISMS; WEAR RATES; Y-TZP COMPOSITES;

ALUMINA; COPPER; FRICTION; INTERFACES (MATERIALS); LUBRICATING OILS; SCANNING ELECTRON MICROSCOPY; TRIBOLOGY; WEAR OF MATERIALS; X RAY PHOTOELECTRON SPECTROSCOPY;

ZIRCONIA;

EID: 82955248026     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2011.04899.x     Document Type: Article

References (43)

1. R. H. J. Hannink, M. J. Murray, and, H. G. Scott, " Friction and Wear of Partially Stabilized Zirconia: Basic Science and Practical Applications," Wear, 100, 355-66 (1984). (Pubitemid 15488643)
2. G. W. Stachowiak, and, G. B. Stachowiak, " Unlubricated Friction and Wear Behavior of Toughened Zirconia Ceramics," Wear, 132, 151-71 (1989).
3. W. Bundschuh, and, K.-H. Zum Gahr, " Effect of Temperature on Friction and Oscillating Sliding Wear of Dense and Porous 3Y-TZP Zirconia Ceramics," Tribol. Int., 27, 97-103 (1994).
4. A. Gangopadhyay, S. Jahanmir, and, M. B. Peterson, " Self-Lubricating Ceramic Matrix Composites "; pp. 163-99 in Friction and Wear of Ceramics, Edited by, S. Jahanimr,. Marcel Dekker, Inc., New York, 1994.
5. T. E. Fischer, M. P. Anderson, and, S. Jahanmir, " Influence of Fracture Toughness on the Wear Resistance of Yttria-Doped Zirconium Oxide," J. Am. Ceram. Soc., 72 [2] 252-7 (1989).
6. M. Woydt, J. Kadoori, K.-H. Habig, and, H. Hausner, " Unlubricated Sliding Behavior of Various Zirconia-Based Ceramic," J. Eur. Ceram. Soc., 7, 135-45 (1991). (Pubitemid 21650124)
7. H. Liang, T. E. Fischer, M. Nauer, and, C. Carry, " Effect of Grain Boundary Impurities on the Mechanical and Tribological Properties of Zirconia Surfaces," J. Am. Ceram. Soc., 76 [2] 325-9 (1993).
8. S. W. Lee, S. M. Hsu, and, M. C. Shen, " Ceramic Wear Maps: Zirconia," J. Am. Ceram. Soc., 76 [8] 1937-47 (1993).
9. W. M. Rainforth, " The Wear Behavior of Oxide Ceramics-A Review," J. Mater. Sci., 39, 6705-21 (2004). (Pubitemid 40000051)
10. R. Khanna, and, B. Basu, " Sliding Wear Properties of Self-Mated Yttria-Stabilized Tetragonal Zirconia Ceramics in Cryogenic Environment," J. Am. Ceram. Soc., 90 [8] 2525-34 (2007). (Pubitemid 47220891)
11. H. G. Scott, " Friction and Wear of Zirconia at Very low Sliding Speed "; pp. 8-12 in Wear of Materials, Edited by, K. C. Lumeda,. American Society of Mechanical Engineer, New York, 1985. (Pubitemid 15497417)
12. S. Ran, L. Winnubst, D. H. A. Blank, H. R. Pasaribu, J. W. Sloetjes, and, D. J. Schipper, " Dry-Sliding Self-Lubricating Ceramics: CuO Doped 3Y-TZP," Wear, 267, 1696-701 (2009).
13. X. Qunji, and, L. Huiwen, " The Effect of Solid Lubricants on the Tribological Behavior of Zirconia at High Temperatures up to 600°C," J. Phys. D: Appl. Phys., 30, 1965-71 (1997).
14. 3) Matrix Composites Doped With Different Solid Lubricants From Room Temperature to 800 °C," Wear, 267, 1353-60 (2009).
15. J. Song, M. Valefi, M. de Rooij, and, D. J. Schipper, " A Mechanical Model for Surface Layer Formation on Self-Lubricating Ceramic Composites," Wear, 268, 1072-9 (2010).
16. H. E. Sliney, " Solid Lubricant Materials for High Temperatures-a Review," Tribol. Int., 15, 303-15 (1982). (Pubitemid 13462115)
17. J. S. Zabinski, J. H. Sanders, J. Nainaparampil, and, S. V. Prasad, " Lubrication Using a Microstructurally Engineered Oxide: Performance and Mechanisms," Tribol. Lett., 8, 103-16 (2000). (Pubitemid 32058141)
18. M. Goto, A. Kasahara, T. Oishi, Y. Konishi, and, M. Tosa, " Lubricative Coatings of Copper Oxide for Aerospace Applications," J. Appl. Phys., 94, 2110-4 (2003).
19. H. R. Pasaribu, J. W. Sloetjes, and, D. J. Schipper, " Friction Reduction by Adding Copper Oxide into Alumina and Zirconia Ceramics," Wear, 255, 699-707 (2003). (Pubitemid 36967464)
20. J. Song, M. Valefi, M. de Rooij, D. J. Schipper, and, L. Winnubst, " The Effect of an Alumina Counterface on Friction Reduction of CuO/3Y-TZP at Room Temperature," Wear, in press (2011), doi: 10.1016/j.wear.2011.08.016.
21. B. Prakash, and, J. Celis, " The Lubricity of Oxides Revised Based on a Polarisability Approach," Tribol. Lett., 27, 105-12 (2007). (Pubitemid 46870709)
22. S. Ran, L. Winnubst, D. H. A. Blank, H. R. Pasaribu, J. W. Sloetjes, and, D. J. Schipper, " Effect of Microstructure on the Tribological and Mechanical Properties of CuO-Doped 3Y-TZP Ceramics," J. Am. Ceram. Soc., 90 [9] 2747-52 (2007). (Pubitemid 47378531)
23. G. Anstis, P. Chantikul, B. Lawn, and, D. Marshall, " A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64 [9] 533-8 (1981).
24. 2 System by X-ray Diffraction," J. Am. Ceram. Soc., 67 [6] C119-21 (1984).
25. X. Dong, S. Jahanmir, and, S. M. Hsu, " Tribological Characteristics of α-Alumina at Elevated Temperatures," J. Am. Ceram. Soc., 74 [5] 1036-44 (1991).
26. X. Dong, and, S. Jahanmir, " Wear Transition Diagram for Silicon Nitride," Wear, 165, 169-80 (1993). (Pubitemid 23668518)
27. J. F. Moulder, W. F. Stickle, P. E. Sobol, and, K. D. Bomben, Handbook of X-ray Photoelectron Spectroscopy, Perkin-Elmer Corporation, Eden Prairie, MN, 1992.
28. 2O and CuO," Phys. Rev. B, 38, 11322-30 (1988).
29. F. Toschi, C. Melandri, P. Pinasco, E. Roncari, S. Guicciardi, and, G. de Portu, " Influence of Residual Stresses on the Wear Behavior of Alumina/Alumina-Zirconia Laminated Composites," J. Am. Ceram. Soc., 86 [9] 1547-53 (2003).
30. J. R. Seidensticker, and, M. J. Mayo, " Thermal Analysis of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Powder Doped with Copper Oxide," J. Am. Ceram. Soc., 79 [2] 401-6 (1996). (Pubitemid 126671286)
31. L. Lemaire, S. M. Scholz, P. Bowen, J. Dutta, H. Hofmeister, and, H. Hofmann, " Effect of CuO Additives on the Reversibility of Zirconia Crystalline Phase Transitions," J. Mater. Sci., 34, 2207-15 (1999).
32. L. Winnubst, S. Ran, E. A. Speets, and, D. H. A. Blank, " Analysis of Reactions During Sintering of CuO-Doped 3Y-TZP Nano-Powder Composites," J. Eur. Ceram. Soc., 29, 2549-57 (2009).
33. S. Ran, L. Winnubst, W. Wiratha, and, D. H. A. Blank, " Sintering Behavior of 0.8 mol%-CuO-Doped 3Y-TZP Ceramics," J. Am. Ceram. Soc., 89 [1] 151-5 (2006).
34. B. Basu, R. G. Vitchev, J. Vleugels, J. P. Celis, and, O. Van Der Biest, " Influence of Humidity on the Fretting Wear of Self-Mated Tetragonal Zirconia Ceramics," Acta Mater., 48 [10] 2461-71 (2000).
35. H. S. Kong, and, M. F. Ashby, " Friction-Heating Maps and Their Application," MRS Bull., 16, 41-8 (1991).
36. N. P. Bansal, and, D. Zhu, " Thermal Conductivity of Zirconia-Alumina Composites," Ceram. Int., 31, 911-6 (2005). (Pubitemid 40893999)
37. A. M. Limarga, and, D. R. Clarke, " The Grain Size and Temperature Dependence of the Thermal Conductivity of Polycrystalline, Tetragonal Yttria-Stabilized Zirconia," Appl. Phys. Lett., 98, 211906 (2011).
38. 3 and CuO Nanopowders," Microelectron. J., 40, 681-6 (2009).
39. O. O. Ajayi, A. Erdemir, R. H. Lee, and, F. A. Nichols, " Sliding Wear of Silicon Carbide-Titanium Boride Ceramic-Matrix Composite," J. Am. Ceram. Soc., 76 [2] 511-7 (1993).
40. 3 Pairs at High Temperature in air," Tribo. Lett., 4, 243-50 (1998). (Pubitemid 128691459)
41. H. E. Sliney, T. P. Jacobson, D. Deadmore, and, K. Miyoshi, " Tribology of Selected Ceramics at Temperatures to 900°C," Ceram. Eng. Soc. Proc., 7, 1039-51 (1986).
42. A. G. Atkins, and, D. Tabor, " Hardness and Deformation Properties of Solids at Very High Temperatures," Proc. R. Soc. London Ser. A, 292, 441-59 (1966).
43. G. Vagnard, and, J. Washburn, " Plastic Deformation of Cuprous Oxide," J. Am. Ceram. Soc., 5 [2] 88-94 (1968).