A mechanical model for surface layer formation on self-lubricating ceramic composites

Wear

Volumn 268, Issue 9-10, 2010, Pages 1072-1079

  Song, Jiupeng ^a   Valefi, Mahdiar ^a   de Rooij, Matthijn ^a   Schipper, Dirk J ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Ceramics; Composites; Material transfer; Modeling; Self lubricating

Indexed keywords

CERAMIC COMPOSITE MATERIALS; CERAMIC COMPOSITES; COMPOSITE DISKS; COMPOSITES MATERIAL; CONTACT CONDITIONS; CONTACT SURFACE; DRY SLIDING; FRICTION FORCE; HAMILTONS; INCLUSION MATERIAL; LOADING CONDITION; MACROSCOPIC DEFORMATIONS; MATERIAL PARAMETER; MATERIAL TRANSFERS; MECHANICAL MODEL; MULTI-SLIDING; NORMAL LOADS; SECOND PHASE; SECOND PHASE MATERIALS; SELF-LUBRICATING; SUBSURFACE STRESS; SURFACE LAYERS; TRANSFERRED LAYER; TRIBOLOGICAL TESTS; YIELD STRENGTH;

CERAMIC MATERIALS; COMPOSITE MICROMECHANICS; INCLUSIONS; LUBRICATION; MATERIALS HANDLING EQUIPMENT; POWDER METALLURGY; SELF LUBRICATING COMPOSITES;

SURFACES;

EID: 77649235828     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2010.01.012     Document Type: Article

References (34)

1. Liu H., and Xue Q. The tribological properties of TZP-graphite self-lubricating ceramics. Wear 198 (1996) 143-149
2. 2 composites. Wear 256 (2004) 182-189
3. Sang K., Lü Z., and Jin Z. A study of the SiC-L composite ceramics for self-lubrication. Wear 253 (2002) 1188-1193
4. Fournier P., Reynaud P., Platon F., and Absi J. Tribological behaviour of carbon-fibre-reinforced SiC matrix composites. Proc. Instn. Mech. Eng. Part J: J. Eng. Tribol. 214 (2000) 291-306
5. 4-based self-lubricating materials. Tribol. Trans. 43 (2000) 603-610
6. Tucci A., and Esposito L. Second phases and material transfer in alumina ceramics sliding systems. Wear 245 (2000) 76-83
7. 2 additions when sliding against steel. Int. J. Refract. Met. Hard Mater. 25 (2007) 189-197
8. Pasaribu H.R., Sloetjes J.W., and Schipper D.J. Friction reduction by adding copper oxide into alumina and zirconia ceramics. Wear 255 (2003) 699-707
9. Pasaribu H.R., Reuver K.M., Schipper D.J., Ran S., Wiratha K.W., Winnubst A.J.A., and Blank D.H.A. Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide. Int. J. Refract. Met. Hard Mater. 23 (2005) 386-390
10. Higgs III C.F., and Wornyoh E.Y.A. An in situ mechanism for self-replenishing powder transfer films: experiments and modeling. Wear 264 (2008) 131-138
11. Gangopadhyay A., Jahanmir S., and Peterson M.B. Self-lubricating ceramic matrix composites. In: Jahanmir S. (Ed). Friction and Wear of Ceramics (1994), Marcel Dekker, New York 163-197
12. Blau P.J., Dumont B., Braski D.N., Jenkins T., Zanoria E.S., and Long M.C. Reciprocating friction and wear behavior of a ceramic-matrix graphite composite for possible use in diesel engine valve guides. Wear 225-229 (1999) 1338-1349
13. Alexeyev N., and Jahanmir S. Mechanics of friction in self-lubricating composite materials. I. Mechanics of second-phase deformation and motion. Wear 166 (1993) 41-48
14. Bushe N.A., Goryacheva I.G., and Makahovskaya Y.Y. Effects of aluminum-alloy composition on self-lubrication of the frictional surfaces. Wear 254 (2003) 1276-1280
15. Johnson K.L. Contact Mechanics (1987), Cambridge University Press, Cambridge
16. Yan W., O'Dowd N.P., and Busso E.P. Numerical study of sliding wear track caused by a loaded pin on a rotating disc. J. Mech. Phys. Solids 50 (2002) 449-470
17. Bouaziz O., and Buessler P. Iso-work increment assumption for heterogeneous material behavior modelling. Adv. Eng. Mater. 79 (2004) 79-83
18. Wilkinson D.S., Pompe W., and Oeschner M. Modeling the mechanical behaviour of heterogeneous multi-phase materials. Prog. Mater. Sci. 46 (2001) 379-405
19. Ju J.W., and Chen T.M. Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities. Acta Mech. 103 (1994) 103-121
20. Ju J.W., and Chen T.M. Effective elastic two-phase composites containing randomly dispersed spherical inhomogeneities. Acta Mech. 103 (1994) 123-144
21. Mercier S., Jacques N., and Molinari A. Validation of an interaction law for the Eshelby inclusion problem in elasto-viscoplasticity. Int. J. Solids Struct. 42 (2005) 1923-1941
22. Hamilton G.M. Explicit equations for the stress beneath a sliding spherical contact. Proc. Instn. Mech. Eng. Part C: J. Mech. Eng. Sci. 197 (1983) 53-59
23. Hashin Z. The inelastic inclusion problem. Int. J. Eng. Sci. 7 (1969) 11-36
24. Lur'e A.I. Three-Dimensional Problems of Elasticity (1955), Nauka, Moscow
25. Wang J.C. Young's modulus of porous materials. Part 1. Theoretical derivation of modulus-porosity correlation. J. Mater. Sci. 19 (1984) 801-808
26. Arnold M., Boccaccini A.R., and Ondracek G. Prediction of the Poisson's ratio of porous materials. J. Mater. Sci. 31 (1996) 1643-1646
27. German R.M. Sintering Theory and Practice (1997), John Wiley & Sons, New York
28. Munro R.G. Elastic moduli data for polycrystalline ceramics. NISTIR 6853 (2002)
29. Cost J.R., Janowski K.R., and Rossi R.C. Elastic properties of isotropic graphite. Philos. Mag. 17 (1968) 851-854
30. Luo X., and Chung D.D.L. Graphite-graphite electrical contact under dynamic mechanical loading. Carbon 39 (2001) 615-628
31. Bowden F.P., and Tabor D. Friction and Lubrication if Solids. Part I (1950), Clarendon Press
32. Ran S., Winnubst L., Blank D.H.A., Pasaribu H.R., Sloetjes J.W., and Schipper D.J. Effect of microstructure on the tribological and mechanical properties off CuO-doped 3Y-TZP ceramics. J. Am. Ceram. Soc. 90 (2007) 2747-2752
33. Chang L., and Gao Y. A simple numerical method for contact analysis of rough surfaces. J. Tribol. 121 (1999) 425-432
34. Ren N., and Lee S.C. Contact simulation of three-dimensional rough surfaces using moving grid method. J. Tribol. 115 (1993) 597-601