Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti-49Al alloy

Materials and Design

Volumn 34, Issue , 2012, Pages 552-558

  Fan, Jianglei ^a   Li, Xinzhong ^a   Su, Yanqing ^a   Guo, Jingjie ^a   Fu, Hengzhi ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

Author keywords

A. Intermetallics; C. Casting; E. Microhardness

Indexed keywords

BRIDGMAN; CONSTANT TEMPERATURE; DENDRITIC SPACINGS; DIRECTIONAL SOLIDIFICATION FURNACE; DIRECTIONALLY SOLIDIFIED; INTERLAMELLAR SPACING; MICROSTRUCTURE PARAMETERS; TIAL-BASED ALLOYS;

GROWTH RATE; INTERMETALLICS; MICROHARDNESS; TITANIUM ALLOYS; TITANIUM COMPOUNDS;

VANADIUM;

EID: 81855207821     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.05.007     Document Type: Article

References (36)

1. Wu X. Review of alloy and process development of TiAl alloys. Intermetallics 2006, 14:1114-1122.
2. Clemens H., Kestler H. Processing and applications of intermetallic γ-TiAl-based alloys. Adv Eng Mater 2000, 2:551-570.
3. Dimiduk D.M. Gamma titanium aluminide alloys-an assessment within the competition of aerospace structural materials. Mater Sci Eng A 1999, 263:281-288.
4. Kim Y.W. Ordered intermetallic alloys, Part III: gamma titanium aluminide. J Met 1994, 46:30-39.
5. 3Al lamellar microstructure in TiAl-Si alloys. Acta Mater 1996, 44:2523-2535.
6. Johnson D.R., Inui H., Muto S., Omiya Y., Yamanaka T. Microstructural development during directional solidification of α-seed TiAl alloys. Acta Mater 2006, 54:1077-1085.
7. 2 lamellar microstructures. Intermetallics 1999, 7:779-784.
8. Yamaguchi M., Johnson D.R., Lee H.N., Inui H. Directional solidification of TiAl-based alloys. Intermetallics 2000, 8:511-517.
9. Luo W., Shen J., Min Z., Fu H. Lamellar orientation control of TiAl alloys under high temperature gradient with Ti-43Al-3Si seed. J Cryst Growth 2009, 310:5441-5446.
10. Kim S.E., Lee Y.T., Oh M.H., Inui H., Yamaguchi M. Directional solidification of TiAl-Si alloys using a polycrystalline seed. Intermetallics 2000, 8:399-405.
11. Lapin J., Ondrúš L., Nazmy M. Directional solidification of intermetallic Ti-46Al-2W-0.5Si alloy in alumina molds. Intermetallics 2002, 10:1019-1031.
12. Jung I.S., Jang H.S., Oh M.H., Lee J.H., Wee D.M. Microstructure control of TiAl alloys containing β stabilizers by directional solidification. Mater Sci Eng A 2002, 329-331:13-18.
13. Johnson D.R., Chihara K., Inui H., Yamaguchi M. Microstructural control of TiAl-Mo-B alloys by directional solidification. Acta Mater 1998, 46:6529-6540.
14. Böyük U., Maraşli{dotless} N. Dependency of eutectic spacings and microhardness on the temperature gradient for directionally solidification Sn-Ag-Cu. Mater Chem Phys 2010, 119:442-448.
15. Kaya H., Gündüz M., Çadi{dotless}rli{dotless} E., Maraşli{dotless} N. Dependency of microindentation hardness on solidification processing parameters and cellular spacing in the directionally solidified Al based alloys. J Alloys Compd 2009, 478:281-286.
16. Gündüz M., Kaya H., Çadi{dotless}rli{dotless} E., Özmen A. Interflake spacings and undercoolings in Al-Si irregular eutectic alloy. Mater Sci Eng A 2004, 369:215-229.
17. Kaya H., Çadi{dotless}rli{dotless} E., Gündüz M., Ülgen A. Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy. J Mater Eng Perform 2003, 12:544-551.
18. Çadi{dotless}rli{dotless} E., Kaya H., Gündüz M. Effect of growth rates and temperature gradients on the lamellar spacing and undercooling in the directionally solidified Pb-Cd eutectic alloy. Mater Res Bull 2003, 38:1457-1476.
19. Çadi{dotless}rli{dotless} E., Gündüz M. The dependence of lamellar spacing on the growth rate and temperature gradient in the lead-tin eutectic alloy. J Mater Process Technol 2000, 97:74-81.
20. Kaya H., Çadi{dotless}rli{dotless} E., Ülgen A. Investigation of the effect of composition on microhardness and determination of thermo-physical properties in Zn-Cu alloys. Mater Des 2011, 32:900-906.
21. Hu X.W., Li S.M., Liu L., Fu H.Z. Research on lamellar structure and microhardness in directionally solidified ternary Sn-40.5Pb-2.6Sb eutectic alloy. J Alloys Compd 2010, 493:116-121.
22. Böyük U., Maraşli{dotless} N. The microstructure parameters and microhardness of directionally solidified Sn-Ag-Cu eutectic alloy. J Alloys Compd 2009, 485:264-269.
23. Fan J., Li X., Su Y., Guo J., Fu H. Dependency of microhardness on solidification processing parameters and microstructure characteristics in the directionally solidified Ti-46Al-0.5W-0.5Si alloy. J Alloys Compd 2010, 504:60-64.
24. Fan J., Li X., Su Y., Guo J., Fu H. The microstructure parameters and microhardness of directionally solidified Ti-43Al-3Si alloy. J Alloys Compd 2010, 506:593-599.
25. 3 particles on mechanical properties of directionally solidified intermetallic Ti-46Al-2W-0.5Si alloy. Mater Sci Eng A 2003, 360:85-95.
26. Dimiduk D.M., Hazzledine P.M., Parthasarathy T.A., Seshagiri S., Mendiratta M.G. The role of grain size and selected microstructural parameters in strengthening fully lamellar TiAl alloys. Metall Mater Trans A 1998, 29:37-47.
27. Christodoulou P., Garbiak M., Piekarski B. Materials microhardness "finger prints" Mater Sci Eng A 2007, 457:350-367.
28. Kaya H., Çadi{dotless}rli{dotless} E., Gündüz M. Directional cellular growth of Al-2wt% Li bulk samples. Appl Phys A 2009, 94:155-165.
29. Berkdemir A., Gündüz M. Effect of growth rate and Mg content on dendritic tip characteristics of Al-Cu-Mg ternary alloys. Appl Phys A 2009, 96:873-886.
30. Böyük U., Maraşli{dotless} N., Kaya H., Çadi{dotless}rli{dotless} E., Keşlioĝlu K. Directional solidification of Al-Cu-Ag alloy. Appl Phys A 2009, 95:923-932.
31. Jung I.S., Kim M.C., Lee J.H., Oh M.H., Wee D.M. High temperature phase equilibria near Ti-50at% Al composition in Ti-Al system studied by directional solidification. Intermetallics 1999, 7:1247-1253.
32. Hunt J.D. Solidification and casting of metals 1979, The Metals of Society, London, p. 3-9.
33. Kurz W., Fisher D.J. Dendritic growth at the limit of stability: tip radius and spacing. Acta Mater 1981, 29:11-20.
34. Trivedi R. Interdendritic spacing: Part II. a comparison of theory and experiment. Metall Mater Trans A 1984, 15:977-982.
35. Hunt J.D., Lu S.Z. Numerical modeling of cellular/dendritic array growth: spacing and structure predictions. Metall Mater Trans A 1996, 27:611-623.
36. Bouchard D., Kirkaldy J.S. Prediction of dendrite arm spacings in unsteady- and steady-state heat flow of unidirectionally solidified binary alloys. Metall Mater Trans B 1997, 28:633-651.