Three-dimensional strain mapping using in situ X-ray synchrotron microtomography

Journal of Strain Analysis for Engineering Design

Volumn 46, Issue 7, 2011, Pages 549-561

  Toda, H ^a   Maire, E ^b   Aoki, Y ^c   Kobayashi, M ^a  

^a TOYOHASHI UNIVERSITY OF TECHNOLOGY   (Japan)

^b UNIVERSITÉ DE LYON   (France)

^c KEIO UNIVERSITY   (Japan)

Author keywords

3D; Computed tomography; Digital volume correlation; Local strain mapping; Microstructural tracking

Indexed keywords

3D; COMPUTED TOMOGRAPHY; LOCAL STRAINS; MICRO-STRUCTURAL; VOLUME CORRELATIONS;

COMPUTERIZED TOMOGRAPHY; MAPPING; STRAIN MEASUREMENT; SYNCHROTRON RADIATION; SYNCHROTRONS; TOMOGRAPHY; X RAYS;

THREE DIMENSIONAL;

EID: 81455134440     PISSN: 03093247     EISSN: 20413130     Source Type: Journal    
DOI: 10.1177/0309324711408975     Document Type: Article

References (50)

1. Martin, T. A., Christie, G. R., and Bhatta-charyya, D. Composite sheet forming, 1997, pp. 217-245 (Elsevier, Amsterdam).
2. Narendran, N., Shukla, A., and Letcher, S. Determination of fracture parameters using embedded fibre-optic sensors. Engng Fract. Mech., 1991, 38, 491-498.
3. Mummery, P. M. and Derby, B. Damage assessment in particle-reinforced metal matrix composites using X-ray microtomography. J. Mater. Sci., 1994, 29, 5615-5624.
4. Humphreys, F. J. The thermomechanical processing of Al-SiC particulate composites. In Proceedings of the Electron Microscopy and Analysis Group and Royal Microscopical Society Conference 89, London, September 1990, pp. 465-468 (IOP, Bristol, UK).
5. p using X-ray synchrotron phase contrast microtomography. Acta Mater., 1999, 47, 1613-1625.
6. Toda, H., Sinclair, I., Buffière, J. Y., Maire, E., Connolley, T., Joyce, M., Khor, K. H., and Greg-son, P. Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray micro-tomography. Phil. Mag. A, 2003, 83, 2429-2448.
7. Toda, H., Sinclair, I., Buffière, J. Y., Maire, E., Khor, K. H., Gregson, P., and Kobayashi, T. A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomogra-phy. Acta Mater., 2004, 52, 1305-1317.
8. Nielsen, S. F., Poulsen, H. F., Beckmann, F., Thorning, C., and Wert, J. A. Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography. Acta Mater., 2003, 51, 2407-2415.
9. Kobayashi, M., Toda, H., Kawai, Y., Ohgaki, T., Uesugi, K., Wilkinson, D. S., Kobayashi, T., Aoki, Y., and Nakazawa, M. High-density three-dimensional mapping of internal strain by tracking microstructural features. Acta Mater., 2008, 56, 2167-2181.
10. Bay, B., Smith, T., Fyhrie, D., and Saad, M. Digital volume correlation: three-dimensional strain mapping using X-ray tomography. Exp. Mech., 1999, 39, 218-227.
11. Roux, S., Hild, F., Viot, P., and Bernard, D. Three dimensional image correlation from X-ray computed tomography of solid foam. Compos. Part A: Appl. Sci. Mf., 2008, 39, 1253-1265.
12. Hild, F. and Roux, S. Digital image correlation, from displacement measurement to identification of elastic properties-a review. Strain, 2006, 42, 69-80.
13. Bay, B. Methods and applications of digital volume correlation. J. Strain Anal., 2008, 43, 745-760.
14. Zhang, H., Toda, H., Qu, P. C., Sakaguchi, Y., Kobayashi, M., Uesugi, K., and Suzuki, Y. Three-dimensional fatigue crack growth behaviour in an aluminium alloy investigated with in situ high-resolution synchrotron X-ray microtomography. Acta Mater., 2009, 57, 3287-3300.
15. Qu, P. C., Toda, H., Zhang, H., Sakaguchi, Y., Qian, L., Kobayashi, M., and Uesugi, K. Local crack driving force analysis of a fatigue crack by a microstructural tracking method. Scr. Mater., 2009, 61, 489-492.
16. Uesugi, K., Suzuki, Y., Yagi, N., Tsuchiyama, A., and Nakano, T. Characterization of the sputtered-sliced zone plate for high energy X-rays. Nucl. Instrum. Methods, 2001, 467-468, 853-856.
17. Kobayashi, M., Toda, H., Uesugi, K., Ohgaki, T., Kobayashi, T., Takayama, Y., and Ahn, B.-G. Preferential penetration path of gallium into grain boundary in practical aluminium alloy. Phil. Mag., 2006, 86(28), 4351-4366. (Pubitemid 44458312)
18. Leclere, D., Kobayashi, M., Toda, H., Uesugi, K., Suzuki, Y., Aoki, Y., and Nakazawa, M. Acta Mater., to be submitted.
19. Toda, H., Uesugi, K., Takeuchi, A., Minami, K., Kobayashi, M., and Kobayashi, T. Three-dimensional observation of nanoscopic precipitates in an aluminium alloy by microtomography with Fresnel zone plate optics. Appl Phys Lett., 2006, 89, 143112.
20. Suzuki, Y., Toda, H., and Schroer, C. Tomography using magnifying optics. In Advanced tomographic methods in materials research and engineering (Ed. J. Banhart), 2008, pp. 181-210 (Oxford University, Press, Oxford, UK).
21. Mokso, R., Cloetens, P., Maire, E., Ludwig, W., and Buffière, J.-Y. Nanoscale zoom tomography with hard X rays using Kirkpatrick-Baez optics. Appl. Phys. Lett., 2007, 90, 144104.
22. Requena, G., Cloetens, P., Altendorfer, W., Poletti, C., Tolnai, D., Warchomicka, F., and Degischer, P. Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics. Scr. Mater., 2009, 61(7), 760-763.
23. Toda, H., Yamamoto, S., Kobayashi, M., and Uesugi, K. Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography. Acta Mater., 2008, 56, 6027-6039.
24. Toda, H., Ohgaki, T., Uesugi, K., Kobayashi, M., Kuroda, N., Kobayashi, T., Niinomi, M., Akahori, T., Makii, K., and Aruga, Y. Quantitative assessment of microstructure and its effects on compression behaviour of aluminium foams via high-resolution synchrotron X-ray tomography. Metall. Mater. Trans. A., Phys. Metal. Mater. Sci., 2006, 37(4), 1211-1220.
25. Toda, H., Hidaka, T., Kobayashi, M., Uesugi, K., Takeuchi, A., and Horikawa, K. Growth behaviour of hydrogen micropores in aluminium alloys during high-temperature exposure. Acta Mater., 2009, 57, 2277-2290.
26. Buffiere, J.-Y., Maire, E., Adrien, J., Masse, J.-P., and Boller, E. In situ experiments with X-ray tomography: an attractive tool for experimental mechanics. Exp. Mech., 2010, 50(3), 289-305.
27. Qian, L., Toda, H., Uesugi, K., Kobayashi, M., and Kobayashi, T. Direct observation and image-based simulation of three-dimensional tortuous crack evolution inside opaque materials. Phys. Rev. Lett., 2008, 100, 115505.
28. Toda, H., Nishimura, T., Uesugi, K., Suzuki, Y., and Kobayashi, M. Influence of high-temperature solution treatments on mechanical properties of an Al-Si-Cu aluminium alloy. Acta Mater., 2010, 58, 2014-2025.
29. Toda, H., Minami, K., Koyama, K., Ichitani, K., Kobayashi, M., Uesugi, K., and Suzuki, Y. Healing behaviour of pre-existing hydrogen micropores in aluminium alloys during plastic deformation. Acta Mater., 2009, 57, 4391-4403.
30. Lourenco, L. Recent advances in LSV, PIV and PTV. In Flow visualization and image analysis, (Ed. F. T. M. Nieuwstadt) 1993, pp. 81-89 (Kluwer, The Netherlands).
31. Lorensen, W. E. and Cline, H. E. Marching cubes: a high resolution 3D surface construction algorithm. Comput. Graph., 1987, 21, 163-169.
32. Kobayashi, M., Toda, H., Kawai, Y., Nakazawa, M., Aoki, Y., Uesugi, K., and Suzuki, Y. Three-dimensional plastic strain mapping technique for X-ray micro-tomography. In Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, September 2010, 1330-1335.
33. Nakazawa, M., Kobayashi, M., Toda, H., and Aoki, Y. Proposal of a method to analyze 3D deformation/fracture characteristics inside materials based on a stratified matching approach. Mach. Vis. Appl., 2010, 21(5), 687-694.
34. Okamoto, K., Hassan, Y. A., and Schmidt, W. D. New tracking algorithm for particle image veloci-metry. Exp. Fluids, 1995, 19(5), 324-347.
35. Rosenfeld, A., Hummel, R. A., and Zucker, S. W. Scene labelling by relaxation operation. IEEE Trans. Syst. Man Cybern., 1976, 6, 420-433.
36. Barber, C. B., Dobkin, D. P., and Huhdanpaa, H. T. The Quickhull algorithm for convex hulls. ACM Trans. Math. Softw., 1996, 22, 469-483. (Pubitemid 126417394)
37. Weckenmann, A. and Krämer, P. Assessment of measurement uncertainty caused in the preparation of measurements using computed tomography. In Proceedings of the 19th IMEKO World Congress on Fundamental and applied metrology, Portugal, 2009, pp. 1888-1892.
38. Toda, H., Yamaguchi, T., Nakawaza, M., Aoki, Y., Uesugi, K., Suzuki, Y., and Kobayashi, M. Four-dimensional annihilation behaviours of micro pores during surface cold working. Mater. Trans., 2010, 51(7), 1288-1295.
39. Kobayashi, M., Toda, H., Uesugi, K., and Suzuki, Y. Acta Mater., to be submitted.
40. Ludwig, W. and Bellet, D. Penetration of liquid gallium into the grain boundaries of aluminium: a synchrotron radiation microtomographic investigation. Mater. Sci. Engng A, Struct. Mater., Prop. Microstruct. Process., 2000, 281(1-2), 198-203. (Pubitemid 30561106)
41. King, A., Johnson, G., Engelberg, D., Ludwig, W., and Marrow, J. Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal. Science, 2008, 321, 382-385. (Pubitemid 352029969)
42. Fu, X., Poulsen, H. F., Schmidt, S., Nielsen, S. F., Lauridsen, E. M., and Jensen, D. Non-destructive mapping of grains in three dimensions. Scr. Mater., 2003, 49(11), 1093-1096.
43. Toda, H., Kobayashi, M., Suzuki, Y., Takeuchi, A., and Uesugi, K. 3D/4D materials science: Its current states and prospects. J. Jpn. Soc. Non-Destruct. Inspect., 2009, 58(10), 433-438 (in Japanese).
44. Toda, H., Takata, M., Ohgaki, T., Kobayashi, M., Kobayashi, T., Uesugi, K., Makii, K., and Aruga, Y. 3-D image-based mechanical simulation of aluminium foams: effects of internal microstructure. Adv. Engng. Mater., 2006, 8(6), 459-467. (Pubitemid 44063411)
45. Hild, F., Maire, E., Roux, S., and Witz, J. F. Three dimensional analysis of a compression test on stone wool. Acta Mater., 2009, 57, 3310-3320.
46. Hall, S. A., Bornert, M., Desrues, J., Pannier, Y., Lenoir, N., Viggiani, G., and Besuelle, P. Discrete and continuum analysis of localised deformation in sand using X-ray mCT and volumetric digital image correlation. Géotechnique, 60(5), 315-322.
47. Bornert, M., Chaix, J. M., Doumalin, P., Dupré, J. C., Fournel, T. D., Jeulin, M. E., Moreaud, M., and Moulinec, H. Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'ana-lyse des matériaux et des structures. Instrum. Mes. Métrol., 2004, 88, 43-88 (in French).
48. Lenoir, N., Bornert, M., Desrues, M., Besuelle, P., and Viggiani, G. Volumetric digital image correlation applied to X-ray microtomography images from triaxial compression tests on argillaceous rock. Strain, 2007, 43, 193-205. (Pubitemid 47103015)
49. Terzi, S., Salvo, L., Suery, M., Limodin, N., Adrien, J., Maire, E., Pannier, Y., Bornert, M., Bernard, D., Felberbaum, M., Rappaz, M., and Boller, M. E. In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys. Scr. Mater., 2009, 61(5), 449-452.
50. Limodin, N., Réthoré, J., Buffière, J.-Y., Gra-vouil, A., Hild, F., and Stéphane, R. Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images. Acta Mater., 2009, 57(14), 4090-4101.