Friction induced wear of rapid prototyping generated materials: A review

Advances in Tribology

Volumn , Issue , 2011, Pages

  Tsouknidas, A ^a  

^a ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 80755169449     PISSN: 16875915     EISSN: 16875923     Source Type: Journal    
DOI: 10.1155/2011/746270     Document Type: Review

References (48)

1. J. P. Kruth, G. Levy, F. Klocke, and T. H. C. Childs, "Consolidation phenomena in laser and powder-bed based layered manufacturing", CIRP Annals-Manufacturing Technology, vol. 56, no. 2, pp. 730-759, 2007. (Pubitemid 350122466)
2. A. Tsouknidas, S. Maropoulos, S. Savvakis, and N. Michailidis, "FEM assisted evaluation of PMMA and Ti6Al4V as materials for cranioplasty resulting mechanical behaviour and the neurocranial protection", Bio-Medical Materials and Engineering. In press.
3. M. C. Galetz, T. Uth, M. A. Wimmer, P. Adam, and U. Glatzel, "Determination of the temperature rise within UHMWPE tibial components during tribological loading", Acta Biomaterialia, vol. 6, no. 2, pp. 552-562, 2010.
4. G. Bergmann, F. Graichen, A. Rohlmann, N. Verdonschot, and G. H. van Lenthe, "Frictional heating of total hip implants, part 1: measurements in patients", Journal of Biomechanics, vol. 34, no. 4, pp. 421-428, 2001. (Pubitemid 32215466)
5. G. Bergmann, F. Graichen, A. Rohlmann, N. Verdonschot, and G. H. van Lenthe, "Frictional heating of total hip implants. Part 2: finite element study", Journal of Biomechanics, vol. 34, no. 4, pp. 429-435, 2001. (Pubitemid 32215467)
6. S. He, S. Cho, and R. Singh, "Prediction of dynamic friction forces in spur gears using alternate sliding friction formulations", Journal of Sound and Vibration, vol. 309, no. 3-5, pp. 843-851, 2008. (Pubitemid 350052126)
7. T. Cousseau, B. Graça, A. Campos, and J. Seabra, "Friction torque in grease lubricated thrust ball bearings", Tribology International, vol. 44, no. 5, pp. 523-531, 2011.
8. X. Q. Yu, S. He, and R. L. Cai, "Frictional characteristics of mechanical seals with a laser-textured seal face", Journal of Materials Processing Technology, vol. 129, no. 1-3, pp. 463-466, 2002.
9. C. M. Cheah, C. K. Chua, C. W. Lee, C. Feng, and K. Totong, "Rapid prototyping and tooling techniques: a review of applications for rapid investment casting", International Journal of Advanced Manufacturing Technology, vol. 25, no. 3-4, pp. 308-320, 2005. (Pubitemid 40238352)
10. G. N. Levy, R. Schindel, and J. P. Kruth, "Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives", CIRP Annals-Manufacturing Technology, vol. 52, no. 2, pp. 589-609, 2003.
11. S. M. Peltola, F. P. W. Melchels, D. W. Grijpma, and M. Kellomäki, "A review of rapid prototyping techniques for tissue engineering purposes", Annals of Medicine, vol. 40, no. 4, pp. 268-280, 2008. (Pubitemid 351563939)
12. J. Winder and R. Bibb, "Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery", Journal of Oral and Maxillofacial Surgery, vol. 63, no. 7, pp. 1006-1015, 2005. (Pubitemid 40897757)
13. E. Sachlos and J. T. Czernuszka, "Making tissue engineering scaffolds work. Review on the application ofsolid freeform fabrication technology to the production of tissue engineering scaffolds", European Cells and Materials, vol. 5, pp. 29-40, 2003. (Pubitemid 38957399)
14. J. M. Williams, A. Adewunmi, R. M. Schek et al., "Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering", Biomaterials, vol. 26, no. 23, pp. 4817-4827, 2005. (Pubitemid 40347312)
15. S. Kumar and J. P. Kruth, "Wear performance of SLS/SLM materials", Advanced Engineering Materials, vol. 10, no. 8, pp. 1-4, 2008.
16. A. Rosochowski and A. Matuszak, "Rapid tooling: the state of the art", Journal of Materials Processing Technology, vol. 106, no. 1-3, pp. 191-198, 2000. (Pubitemid 32027664)
17. J. P. Li, J. R. de Wijn, C. A. van Blitterswijk, and K. de Groot, "The effect of scaffold architecture on properties of direct 3D fiber deposition of porous Ti6Al4V for orthopedic implants", Journal of Biomedical Materials Research-Part A, vol. 92, no. 1, pp. 33-42, 2010.
18. A. Equbal, A. K. Sood, V. Toppo, R. K. Ohdar, and S. S. Mahapatra, "Prediction and analysis of sliding wear performance of fused deposition modelling-processed ABS plastic parts", Proceedings of the Institution of Mechanical Engineers Part J, vol. 224, no. 12, pp. 1261-1271, 2010.
19. A. Tsouknidas, D. Kountouras, S. Maropoulos, N. Kiratzis, and N. Michalilidis, "Tribological, mechanical and physical characterization of hydroxyapatite/polycarpolactone biocomposites", Journal of the Balkan Tribological Association. In press.
20. S. Kumar, J. P. Kurth, J. van Humbeeck, and A. Voet, "A study of degeneration of laser sintered moulds using wear tests", Rapid Prototyping Journal, vol. 15, no. 2, pp. 104-110, 2009.
21. R. C. Bill, "Review of factors that influence fretting wear", in Materials Evaluation Under Fretting Conditions, ASTM STP 780, S. R. Brown, Ed., pp. 165-181, ASTM, Philadelphia, Pa, USA, 1982.
22. R. B. Waterhouse, "Fretting fatigue", International Journal of Fatigue, vol. 37, no. 2, pp. 77-97, 1992.
23. M. Niinomi, "Mechanical biocompatibilities of titanium alloys for biomedical applications", Journal of the Mechanical Behavior of Biomedical Materials, vol. 1, no. 1, pp. 30-42, 2008. (Pubitemid 47557535)
24. P. Schaaff, "The role of fretting damage in total hip arthroplasty with modular design hip joints-evaluation of retrieval studies and experimental simulation methods", Journal of Applied Biomaterials & Biomechanics, vol. 2, no. 3, pp. 121-135, 2004.
25. Y. Berthier, L. Vincent, and M. Godet, "Fretting fatigue and fretting wear", Tribology International, vol. 22, no. 4, pp. 235-242, 1989.
26. S. Fouvry, P. Kapsa, and L. Vincent, "Fretting-wear and fretting-fatigue: relation through a mapping concept", in Fretting Fatigue: Current Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran, and C. B. Elliott, Eds., pp. 49-64, ASTM, West Conshohocken, Pa, USA, 2000. (Pubitemid 30549137)
27. V. Chandrasekaran, W. L. Sauer, A. M. Taylor, and D. W. Hoeppner, "Evaluation of the fretting corrosion behavior of the proximal pad taper of a modular hip design", Wear, vol. 231, no. 1, pp. 54-64, 1999. (Pubitemid 29417310)
28. M. Varenberg, G. Halperin, and I. Etsion, "Different aspects of the role of wear debris in fretting wear", Wear, vol. 252, no. 11-12, pp. 902-910, 2002. (Pubitemid 34805915)
29. E. Rabinowicz, Compatibility Criteria for Sliding Metals in Friction and Lubrication in Metal Processing, ASME, New York, NY, USA, 1996.
30. F. P. Bowden and D. Tabor, "The influence of surface finish on the friction and deformation of surfaces in properties of metallic surfaces", Journal Institute of Metals, pp. 197-212, 1953.
31. ASTM G99-04: Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International.
32. T. C. Ovaert and H. S. Cheng, "Counterface topographical effects on the wear of polyetheretherketone and a polyetheretherketone-carbon fiber composite", Wear, vol. 150, no. 1-2, pp. 275-287, 1991.
33. D. Dowson, S. Taheri, and N. C. Wallbridge, "The role of counterface imperfections in the wear of polyethylene", Wear, vol. 119, no. 3, pp. 277-293, 1987.
34. P. H. Chong, H. C. Man, and T. M. Yue, "Microstructure and wear properties of laser surface-cladded Mo-WC MMC on AA6061 aluminum alloy", Surface and Coatings Technology, vol. 145, no. 1-3, pp. 51-59, 2001. (Pubitemid 32943951)
35. K. Murali, A. N. Chatterjee, P. Saha et al., "Direct selective laser sintering of iron-graphite powder mixture", Journal of Materials Processing Technology, vol. 136, no. 1-3, pp. 179-185, 2003.
36. C. S. Ramesh and C. K. Srinivas, "Friction and wear behavior of laser-sintered iron-silicon carbide composites", Journal of Materials Processing Technology, vol. 209, no. 14, pp. 5429-5436, 2009.
37. C. S. Ramesh, S. K. Seshadri, and K. J. L. Iyer, "A survey of aspects of wear of metals", Indian Journal of Technology, vol. 29, no. 4, pp. 179-185, 1991.
38. N. Saka and D. P. Karalekas, "Friction and wear of particle reinforced metal ceramic composites", in Proceedings of the Conference on Wear of Materials, pp. 784-793, ASME, New York, NY, USA, 1985. (Pubitemid 15497512)
39. A. Simchi, F. Petzoldt, and H. Pohl, "Direct metal laser sintering: material considerations and mechanisms of particle bonding", International Journal of Powder Metallurgy, vol. 37, no. 2, pp. 49-61, 2001. (Pubitemid 32400592)
40. A. Simchi and H. Pohl, "Effects of laser sintering processing parameters on the microstructure and densification of iron powder", Materials Science and Engineering A, vol. 359, no. 1-2, pp. 119-128, 2003. (Pubitemid 37065385)
41. B. H. Lee, J. Abdullah, and Z. A. Khan, "Optimization of rapid prototyping parameters for production of flexible ABS object", Journal of Materials Processing Technology, vol. 169, no. 1, pp. 54-61, 2005. (Pubitemid 41406156)
42. A. K. Sood, R. K. Ohdar, and S. S. Mahapatra, "Parametric appraisal of fused deposition modelling process using the grey Taguchi method", Proceedings of the Institution of Mechanical Engineers Part J, vol. 224, no. B1, pp. 135-145, 2010.
43. Q. Sun, G. M. Rizvi, C. T. Bellehumeur, and P. Gu, "Effect of processing conditions on the bonding quality of FDM polymer filaments", Rapid Prototyping Journal, vol. 14, no. 2, pp. 72-80, 2008. (Pubitemid 351430505)
44. A. K. Sood, R. K. Ohdar, and S. S. Mahapatra, "Parametric appraisal of mechanical property of fused deposition modelling processed parts", Materials and Design, vol. 31, no. 1, pp. 287-295, 2010.
45. K. Friedrich, Z. Zhang, and P. Klein, "Wear of polymer composites", Wear Material Mechanisms and Practice, pp. 269-287, 2005.
46. G. Wröbel and M. Szymiczek, "Influence of temperature on friction coefficient of low density polyethylene", Journal of Achievements in Materials and Manufacturing Engineering, vol. 28, no. 1, pp. 31-34, 2008.
47. D. Shakhvorostov, K. Pöhlmann, and M. Scherge, "An energetic approach to friction, wear and temperature", Wear, vol. 257, no. 1-2, pp. 124-130, 2004. (Pubitemid 38729783)
48. T. Nakahara, S. Momozono, and A. O. Rui, "Effect of surface temperature rise on friction characteristics for sliding speed under unlubricated condition", Proceedings of the Institution of Mechanical Engineers Part J, vol. 224, no. 3, pp. 271-278, 2010.