Friction coefficient and wear mode transition in micro-scale abrasion tests

Tribology International

Volumn 44, Issue 12, 2011, Pages 1878-1889

  Cozza, R C ^a   Tanaka, D K ^b   Souza, R M ^b  

^a CENTRO UNIVERSITÁRIO DA FEI   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Abrasion; Ball cratering; Friction coefficient; Wear

Indexed keywords

ABRASIVE SLURRIES; BALL-CRATERING; DISTILLED WATER; FRICTION COEFFICIENT; FRICTION COEFFICIENTS; MICRO-SCALE ABRASION TEST; NORMAL FORCES; SILICON CARBIDE PARTICLES; TANGENTIAL FORCE; WEAR MODES; WEAR TEST;

ABRASION; FRICTION; GEOMORPHOLOGY; OPTICAL MICROSCOPY; SILICON CARBIDE; TOOL STEEL;

TRIBOLOGY;

EID: 80055072530     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2011.08.006     Document Type: Article

References (77)

1. Cozza RC, Souza RM, Tanaka DK. Wear mode transition during the micro-scale abrasion of WCCo P20 and M2 tool steel. In: Proceedings of the XVIII international congress of mechanical engineering. Ouro Preto, MG, Brazil; 2005.
2. Cozza RC. Wear coefficient and wear mode transition study in micro-abrasive wear testing. M.Sc. dissertation. São Paulo - SP, Brazil: Polytechnic School of the University of São Paulo; 2006. 217 p [in Portuguese].
3. da Silva WM. Effect of pressing pressure and iron powder size on the micro-abrasion of steam-oxidized sintered iron. M.Sc. dissertation. Uberlândia - MG, Brazil: Federal University of Uberlândia; 2003. 98 p [in Portuguese].
4. W.M. da Silva, R. Binder, and J.D.B. de Mello Abrasive wear of steam-treated sintered iron Wear 258 2005 166 177 (Pubitemid 39648744)
5. R.C. Cozza, J.D.B. de Mello, D.K. Tanaka, and R.M. Souza Relationship between test severity and wear mode transition in micro-abrasive wear tests Wear 263 2007 111 116 (Pubitemid 47487389)
6. R.C. Cozza, D.K. Tanaka, and R.M. Souza Micro-abrasive wear of DC and pulsed DC titanium nitride thin films with different levels of film residual stresses Surface and Coatings Technology 201 2006 4242 4246 (Pubitemid 44783107)
7. Cozza RC, Souza RM, Tanaka DK. Ball wear influence at the caps formation in the micro-abrasive wear testing by rotative fix ball. In: Proceedings of the IV national congress of mechanical engineering. Recife - PE, Brazil; 2006 [in Portuguese].
8. Zeferino RRF, Cozza RC, Souza RM, Tanaka DK. Effect of the contact pressure on the wear mode transition in micro-abrasive wear tests of WCCo P20. In: Proceedings of the IXX international congress of mechanical engineering. Brasília - DF, Brazil; 2007.
9. Cozza RC, de Souza LFM, Zeferino RRF, das Neves MDM, Souza RM, Tanaka DK. A study about results reprodutibility and abrasive particles fragmentation in micro-abrasive wear testing by rotating ball. In: Proceedings of the V national congress of mechanical engineering. Salvador - BA, Brazil; 2008 [in Portuguese].
10. D.A. Kelly, and I.M. Hutchings A new method for measurement of particle abrasivity Wear 250 2001 76 80 (Pubitemid 33053058)
11. K.L. Rutherford, and I.M. Hutchings Theory and application of a micro-scale abrasive wear test Journal of Testing and Evaluation - JTEVA 25 2 1997 250 260 (Pubitemid 127486101)
12. Hutchings IM. Tribology - friction and wear of engineering materials. 7th ed. London, UK: Edward Arnold, a division of Hodder Headline PLC; 1992.
13. I.M. Hutchings Mechanisms of wear in powder technology: a review Powder Technology 76 1993 3 13
14. R.I. Trezona, D.N. Allsopp, and I.M. Hutchings Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test Wear 225229 1999 205 214 (Pubitemid 30112868)
15. K. Adachi, and I.M. Hutchings Wear-mode mapping for the micro-scale abrasion test Wear 255 2003 23 29 (Pubitemid 36967423)
16. K. Adachi, and I.M. Hutchings Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness Wear 258 2005 318 321 (Pubitemid 39648751)
17. K. Bose, and R.J.K Wood Optimum tests conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings Wear 258 2005 322 332 (Pubitemid 39648752)
18. Y.J. Mergler, and Veld H. Huis in 't Micro-abrasive wear of semi-crystalline polymers Tribological Research and Design for Engineering Systems 2003 165 173
19. J.C.A. Batista, A. Matthews, and C. Godoy Micro-abrasive wear of PVD duplex and single-layered coatings Surface and Coatings Technology 142144 2001 1137 1143 (Pubitemid 32939679)
20. J.C.A. Batista, C. Godoy, and A. Matthews Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti,Al)N, TiN and CrN coatings Tribology International 35 2002 363 372 (Pubitemid 34710151)
21. J.C.A. Batista, M.C. Joseph, C. Godoy, and A. Matthews Micro-abrasion wear testing of PVD TiN coatings on untreated and plasma nitrided AISI H13 steel Wear 249 2002 971 979 (Pubitemid 33053051)
22. Baptista AM, Ferreira J, Pinto N. Micro-abrasive wear testing by rotating ball. In: Proceedings of seventh Portuguese conference of tribology. Porto, Portugal; 2000 [in Portuguese].
23. J.O. Bello, and R.J.K. Wood Micro-abrasion of filled and unfilled polyamide 11 coatings Wear 258 2005 294 302 (Pubitemid 39648748)
24. K.L. Rutherford, and I.M. Hutchings A micro-abrasive wear test, with particular application to coated systems Surface and Coatings Technology 79 1996 231 239 (Pubitemid 126396901)
25. A. Ramalho Micro-scale abrasive wear of coated surfaces-prediction models Surface and Coatings Technology 197 2005 358 366 (Pubitemid 40706609)
26. P.H. Shipway, and C.J.B. Hodge Microabrasion of glass - the critical role of ridge formation Wear 237 2000 90 97 (Pubitemid 30218301)
27. M.G. Gee, A. Gant, I.M. Hutchings, R. Bethke, K. Schiffman, and K. Van Acker Progress towards standardisation of ball cratering Wear 255 2003 1 13 (Pubitemid 36967422)
28. J.O. Bello, and R.J.K. Wood Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application Wear 255 2003 1157 1167 (Pubitemid 37002341)
29. I.M. Hutchings Abrasive and erosive wear tests for thin coatings: a unified approach Tribology International 31 13 1998 5 15 (Pubitemid 34867182)
30. Y. Kusano, K. Van Acker, and I.M. Hutchings Methods of data analysis for the micro-scale abrasion test on coated substrates Surface and Coatings Technology 183 2004 312 327 (Pubitemid 38653034)
31. D.N. Allsopp, and I.M. Hutchings Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures Wear 251 2001 1308 1314 (Pubitemid 33071583)
32. P.H. Shipway, and L. Howell Microscale abrasioncorrosion behaviour of WCCo hardmetals and HVOF sprayed coatings Wear 258 2005 303 312 (Pubitemid 39648749)
33. H. Chen, C. Xu, Q. Zhou, I.M. Hutchings, P.H. Shipway, and J. Liu Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WCCo coatings Wear 258 2005 333 338 (Pubitemid 39648753)
34. K.L. Rutherford, and I.M. Hutchings Micro-scale abrasive wear testing of PVD coatings on curved substrates Tribology Letters 2 1996 1 11 (Pubitemid 126818804)
35. J.A. Williams Wear modelling: analytical, computational and mapping: a continuum mechanics approach Wear 225229 1999 1 17 (Pubitemid 30112846)
36. T. Hisakado, T. Tanaka, and H. Suda Effect of abrasive particle size on fraction of debris removed from plowing volume in abrasive wear Wear 236 1999 24 33 (Pubitemid 30087151)
37. L. Fang, J. Xing, W. Liu, Q. Xue, G. Wu, and X. Zhang Computer simulation of two-body abrasion process Wear 251 2001 1356 1360 (Pubitemid 33066683)
38. P.H. Shipway A mechanical model for particle motion in the micro-scale abrasion wear test Wear 257 2004 984 991 (Pubitemid 39375608)
39. M.A. Masen, M.B. de Rooij, and D.J. Schipper Micro-contact based modelling of abrasive wear Wear 258 2005 339 348 (Pubitemid 39637600)
40. P.E. Sinnett-Jones, J.A. Wharton, and R.J.K. Wood Micro-abrasion- corrosion of a CoCrMo alloy in simulated artificial hip joint environments Wear 259 2005 898 904
41. V.K. Gorana, V.K. Jain, and G.K. Lal Forces prediction during material deformation in abrasive flow machining Wear 260 2006 128 139 (Pubitemid 41336558)
42. M. Barge, J. Rech, H. Hamdi, and J.M. Bergheau Experimental study of abrasive process Wear 264 2008 382 388
43. J.A. Williams, and A.M. Hyncica Abrasive wear in lubricated contacts Journal of Physics D: Applied Physics 25 1992 A81 A90
44. K. Kato Abrasive wear of metals Tribology International 30 5 1997 333 338 (Pubitemid 127424135)
45. R.I. Trezona, and I.M. Hutchings Three-body abrasive wear testing of soft materials Wear 233235 1999 209 221 (Pubitemid 30087019)
46. M.G. Gee, and M.J. Wicks Ball crater testing for the measurement of the unlubricated sliding wear of wear-resistant coatings Surface and Coatings Technology 133134 2000 376 382
47. D.N. Allsopp, R.I. Trezona, and I.M. Hutchings The effects of ball surface condition in the micro-scale abrasive wear test Tribology Letters 5 1998 259 264 (Pubitemid 128690234)
48. G.W. Stachowiak Particle angularity and its relationship to abrasive and erosive wear Wear 241 2000 214 219
49. G.B. Stachowiak, and G.W. Stachowiak Wear mechanisms in ball-cratering tests with large abrasive particles Wear 256 2004 600 607 (Pubitemid 38371007)
50. A.P. Mercer, and I.M. Hutchings The influence of atmospheric humidity on the abrasive wear of metals Wear 103 1985 205 215
51. A.P. Mercer, and I.M. Hutchings The influence of atmospheric composition on the abrasive wear of titanium and Ti-6Al-4V Wear 124 1988 165 176 (Pubitemid 18621888)
52. A.P. Mercer, and I.M. Hutchings The deterioration of bonded abrasive papers during the wear of metals Wear 132 1989 77 97
53. K. Kato Micro-mechanisms of wear - wear modes Wear 153 1992 277 295
54. Y. Xie, and J.A. Williams The prediction of friction and wear when a soft surface slides against a harder rough surface Wear 196 1996 21 34
55. K. Kato Wear in relation to friction - a review Wear 241 2000 151 157
56. A. Neville, and V. Kollia-Rafailidi A comparison of boundary wear film formation on steel and a thermal sprayed Co/Cr/Mo coating under sliding conditions Wear 252 2002 227 239 (Pubitemid 34220340)
57. L. Wang, R.J.K. Wood, T.J. Harvey, S. Morris, H.E.G. Powrie, and I. Care Wear performance of oil lubricated silicon nitride sliding against various bearing steels Wear 255 2003 657 668 (Pubitemid 36967462)
58. 2 addition Wear 262 2007 617 623 (Pubitemid 46123429)
59. Y. Yan, A. Neville, and D. Dowson Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments Wear 263 2007 1105 1111 (Pubitemid 47284312)
60. D. Jianxin, L. Jianhua, Z. Jinlong, S. Wenlong, and N. Ming Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes Wear 264 2008 298 307 (Pubitemid 350151498)
61. X/TiN composite films Tribology International 37 2004 721 725
62. I. Iliu Wear and micropitting of steel ball sliding against TiN coated steel plate in dry and lubricated conditions Tribology International 39 2006 607 615
63. L. Ceschini, G. Palombarini, G. Sambogna, D. Firrao, G. Scavino, and G. Ubertalli Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests Tribology International 39 2006 748 755
64. da Silva CH. Degradation of UHMWPE and POM due to the tribologic action against stainless steel and alumina. Ph.D. thesis. São Paulo - SP, Brazil: Polytechnic School of the University of São Paulo; 2003, 294 p [in Portuguese].
65. Y. Kusano, and I.M. Hutchings Sources of variability in the free-ball micro-scale abrasion test Wear 258 2005 313 317 (Pubitemid 39648750)
66. Gee MG. National physical laboratory. UK. Private communication; 2003.
67. M.G. Gee, A.J. Gant, I.M. Hutchings, Y. Kusano, K. Schiffman, and K. Van Acker Results from an interlaboratory exercise to validate the micro-scale abrasion test Wear 259 2005 27 35 (Pubitemid 41052860)
68. P.H. Shipway, and J.J. Hogg Dependence of microscale abrasion mechanisms of WCCo hardmetals on abrasive type Wear 259 2005 44 51 (Pubitemid 41052862)
69. M.T. Mathew, M.M. Stack, B. Matijevic, L.A. Rocha, and E. Ariza Micro-abrasion resistance of thermochemically treated steels in aqueous solutions: mechanisms, maps, materials selection Tribology International 41 2008 141 149 (Pubitemid 47513307)
70. V.A. Izhevskyi, L.A. Genova, J.C. Bressiani, and A.H.A. Bressiani Liquid phase sintered SiC ceramics from starting materials of different grade Cerâmica 50 2004 261 267
71. Standard DIN 804. Edition: March/1977.
72. G.E.P. Box, J.S. Hunter, and W.G. Hunter Statistics for experimenters - design, innovation, and discovery 2nd ed. 2005 John Wiley & Sons, Inc. Hoboken - New Jersey, USA
73. S. Vieira Analysis of variance - ANOVA 1st ed. 2006 Editora Atlas S.A. São Paulo - SP, Brazil [in Portuguese]
74. P.S. Guimarães Adjust of experimental curves 1st ed. 2001 Editora UFSM Santa Maria - RS, Brazil [in Portuguese]
75. N. Axén, I.M. Hutchings, and S. Jacobson A model for the friction of multiphase materials in abrasion Tribology International 29 6 1996 467 475 (Pubitemid 126397610)
76. A.N.J. Stevenson, and I.M. Hutchings Development of the dry sand/rubber wheel abrasion test Wear 195 1996 232 240
77. N.B. Dube, and I.M. Hutchings Influence of particle fracture in the high-stress and low-stress abrasive wear of steel Wear 233235 1999 246 256 (Pubitemid 30087023)