Modeling in-plane and out-of-plane displacement fields in pull-off tests on FRP strips

Engineering Structures

Volumn 33, Issue 12, 2011, Pages 3715-3725

  Martinelli, Enzo ^a   Czaderski, Christoph ^b   Motavalli, Masoud ^b  

^a UNIVERSITY OF SALERNO   (Italy)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

Author keywords

Bond; Concrete; Delamination; Fracture; FRP; Interface

Indexed keywords

2-D DISPLACEMENT; 3-D DISPLACEMENT; ADHESIVE INTERFACES; BERNOULLI; BOND; BOND BEHAVIOR; COMPUTATIONAL EFFORT; CONCRETE SUBSTRATES; CRACKING OF CONCRETE; DAMAGE MODEL; ELASTIC BEHAVIOR; EXPERIMENTAL OBSERVATION; EXPERIMENTAL TEST; FINITE ELEMENT; FRACTURE MODE; FRACTURE PROCESS; FRACTURING BEHAVIORS; FRP; FRP-CONCRETE INTERFACE; IN-PLANE; INDIRECT IDENTIFICATION; INTERFACE SLIP; LINEAR RANGE; MEASUREMENT SYSTEM; MECHANICAL BEHAVIOR; MECHANICAL PARAMETERS; MODE II; MODEL-BASED OPC; NONLINEAR BEHAVIOR; NUMERICAL MODELS; OUT-OF-PLANE DISPLACEMENT; PROPAGATION PROCESS; PULL-OFF; PULL-OFF TESTS; SCIENTIFIC LITERATURE; STRESS COMPONENT; THEORETICAL MODELS;

CONCRETE BLOCKS; CRACK PROPAGATION; CRACKS; DEBONDING; FRACTURE; GEOMETRICAL OPTICS; MECHANICAL ENGINEERING; MECHANICAL PROPERTIES; NORMAL DISTRIBUTION; OPTICAL CORRELATION; SHEAR STRESS; SPRINGS (COMPONENTS);

THREE DIMENSIONAL;

ADHESION; CRACK PROPAGATION; CRACKING; ELASTICITY; EXPERIMENTAL STUDY; FINITE ELEMENT METHOD; FRACTURE MECHANICS; NUMERICAL MODEL; PULLOUT TEST; REINFORCED CONCRETE; TENSION; THREE-DIMENSIONAL MODELING; TWO-DIMENSIONAL MODELING;

EID: 80054928455     PISSN: 01410296     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engstruct.2011.08.008     Document Type: Article

References (23)

1. Motavalli M, Czaderski C. FRP composites for retrofitting of existing civil structures in Europe: state-of-the-art review. In: Proceedings of the COMPOSITES & POLYCON 2007 American composites manufacturers association. 2007.
2. Taljsten B. Strengthening of beams by plate bonding. ASCE J Mater Civil Eng 1997, 9(4):206-211.
3. Martinelli E., Bilotta A., Faella C., Nigro E. On the behaviour of FRP-to-concrete adhesive interface: theoretical models and experimental results. Advances in composite materials - ecodesign and analysis 2011, 517-546. InTech - Open Access Publisher. B. Attaf (Ed.).
4. Roberts T.M. Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams. The Struct Engineer 1989, 67(12):229-233.
5. Malek A.M., Saadatmanesh H., Ehsani M.R. Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end. ACI Struct J 1998, 95(1):142-152.
6. Rabinovich O., Frostig Y. Closed-form high-order analysis of RC beams strengthened with FRP strips. ASCE J Compos Constr 2000, 4(2):65-74.
7. Czaderski C., Rabinovitch O. Structural behavior and inter-layer displacements in CFRP plated steel beams - optical measurements, analysis, and comparative verification. Composites Part B: Eng 2010, 41(4):276-286.
8. Rabinovitch O. Debonding analysis of fiber-reinforced-polymer strengthened beams: cohesive zone modeling versus a linear elastic fracture mechanics approach. Eng Fracture Mech 2008, 75(10):2842-2859.
9. Faella C, Martinelli E, Nigro E. Interface behaviour in FRP plates bonded to concrete: experimental tests and theoretical analyses. In: Proceedings of the international conference on advanced materials for construction of bridges, buildings and other structures-III. 2003.
10. Czaderski C., Soudki K., Motavalli M. Front and side view image correlation measurements on FRP to concrete pull-off bond tests. ASCE J Compos Constr 2009, 14(4):451-463.
11. Yuan H., Teng J.G., Seracino R., Wu Z.S., Yao J. Full-range behaviour of FRP-to-concrete bonded joints. Eng Struct 2004, 26(5):553-565.
12. Caggiano A, Martinelli E, Faella C. A fully-analytical approach for modelling the response of FRP strips bonded to a stiff substrate. Internat J Solid Struct 2011 [submitted for publication].
13. Faella C., Martinelli E., Nigro E. Direct versus indirect method for identifying FRP-to-concrete interface relationships. ASCE J Compos Constr 2009, 13(3):226-233.
14. Faella C., Martinelli E., Nigro E. Formulation and validation of a theoretical model for intermediate debonding in FRP strengthened RC beams. Composites Part B: Eng 2008, 39(4):645-655.
15. Thouless M.D., Jensen H.M. Elastic fracture mechanics of the peel-test geometry. J Adhesion 1992, 38(3-4):185-197.
16. De Lorenzis L., Zavarise G. Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements. Int J Solids and Struct 2008, 45(20):5419-5436.
17. De Borst R., Remmers J.J.C. Computational modelling of delamination. Composite Sci Technol 2006, 66(6):713-722.
18. Kim K.S., Aravas N. Elastoplastic analysis of the peel test. Int J Solids and Struct 1988, 24(4):417-435.
19. Lu X.Z., Ye L.P., Teng J.G., Jiang J.J. Meso-scale finite element model for FRP sheets/plates bonded to concrete. Eng Struct 2005, 27(4):564-575.
20. Freddi F., Savoia M. Analysis of FRP-concrete debonding via boundary integral equations. Eng Fracture Mech 2008, 75(6):1666-1683.
21. Gom Software ARAMIS, Version v.6.1 2008, GOM mbH, Braunschweig, Germany.
22. Sokolnikoff I.S., Redheffer R.M. Mathematics of physics and modern engineering 1966, McGraw-Hill College. 2nd ed.
23. fib. Structural concrete textbook on behaviour, design and performance. Vol. 1: Introduction-Design Process-Materials, Manual-textbook, fib International, Lausanne (CH). 1999.