Analysis of FRP-concrete debonding via boundary integral equations

Engineering Fracture Mechanics

Volumn 75, Issue 6, 2008, Pages 1666-1683

  Freddi, F ^a   Savoia, M ^b  

^a UNIVERSITY OF PARMA   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

Arc length method; Cohesive interface; FRP concrete delamination; SG BEM

Indexed keywords

BOUNDARY ELEMENT METHOD; BOUNDARY INTEGRAL EQUATIONS; COMPUTER SIMULATION; ELASTICITY; GALERKIN METHODS; MATHEMATICAL MODELS; REINFORCED CONCRETE; SHEAR STRESS;

ARC-LENGTH METHOD; SHEAR STREE-SLIP LAW;

FIBER REINFORCED PLASTICS;

BOUNDARY ELEMENT METHOD; BOUNDARY INTEGRAL EQUATIONS; COMPUTER SIMULATION; ELASTICITY; FIBER REINFORCED PLASTICS; GALERKIN METHODS; MATHEMATICAL MODELS; REINFORCED CONCRETE; SHEAR STRESS;

EID: 38049088377     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2007.05.016     Document Type: Article

References (72)

1. Aimi A, Diligenti M, Freddi F. Numerical aspects in the SGBEM solution of softening cohesive interface problems. J Comput Appl Math; in press, doi:10.1016/j.cam.2006.10.053.
2. Alfano G., and Crisfield M.A. Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues. Int J Numer Methods Engng 50 (2001) 1701-1736
3. Aliabadi M.H., and Saleh A.L. Fracture mechanics analysis of cracking in plain and reinforced concrete using the boundary element method. Engng Frac Mech 69 2 (2002) 267-280
4. Allix O., and Corigliano A. Geometrical and interfacial non-linearities in the analysis of delamination in composites. Int J Solids Struct 36 (1999) 2189-2216
5. Arrea M, Ingraffea AR. Mixed-mode crack propagation in mortar and concrete. Structural Engineering Report, No. 81-13; 1982.
6. Barenblatt G.I. The formulation of equilibrium cracks during brittle fracture, general ideas and hypothesis, axially symmetric cracks. Prikl Mater Mech 23 (1959) 434-444
7. Barenblatt G.I. The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 7 (1962) 55-129
8. Bazant Z.P., and Pfeiffer P.A. Shear fracture tests of concrete. Mater Struct 19 (1986) 111-121
9. Bazant Z.P., and Planas J. Fracture and size effect in concrete and other quasibrittle materials. New directions in Civil Engineering (1998), CRC Press, Boca Raton, FL
10. Bonnet M., Maier G., and Polizzotto C. Symmetric Galerkin boundary element method. Appl Mech Rev 51 (1998) 669-704
11. Brosen K, Van Gemert D. Plate and shear design for external CFRP laminates. In: FRAMCOS-3 conference proceedings; 1998. p. 1793-804.
12. Buyukozturk O., and Hearing B. Crack propagation in concrete composites influenced by interface fracture parameters. Int J Solids Struct 35 31-32 (1998) 4055-4066
13. Camacho G.T., and Ortiz M. Computational modelling of impact damage in brittle materials. Int J Solids Struct 33 (1996) 2899-2938
14. Chajes M.J., Finch W.j., Januska T.F., and Thomson T.A. Bond and force transfer of composite material plates bonded to concrete. ACI Struct J 93 (1996) 208-217
15. Chen T., Wang B., Cen Z., and Wu Z. A symmetric Galerkin multi-zone boundary element method for cohesive crack growth. Engng Fract Mech 63 5 (1999) 591-609
16. Coronado CA, Lopez MM. Modeling of FRP-concrete bond using nonlinear damage mechanics. In: FRPRCS-7 conference proceedings; 2005.
17. Costabel M. Boundary integral operators on Lipschitz domains: elementary results. SIAM J Math Anal 19 3 (1988) 613-626
18. De Borst R., and Remmers J.J.C. Computational modelling of delamination. Compos Sci Technol 66 6 (2006) 713-722
19. Dugdale D.S. Yielding of steel sheets containing slits. J Mech Phys Solids 8 (1960) 100-108
20. Erdogan F., and Sih G.C. On the crack extension in plates under plane loading transverse shear. J Basic Engng 85 (1963) 519-527
21. Ferracuti B., Savoia M., and Mazzotti C. A numerical model for FRP-concrete delamination. Compos Part B: Eng 37 4-5 (2006) 356-364
22. Ferracuti B., Savoia M., and Mazzotti C. Interface law for FRP-concrete delamination. Compos Struct 80 7 (2007) 523-531
23. Ferretti D, Savoia M. Serviceability behavior of R/C tensile members strengthened by FRP plates. Studies and researches; 2000. p. 95-124.
24. Ferretti D., and Savoia M. Cracking evolution in R/C tensile members strengthened by FRP plates. Engng Fract Mech 70 (2003) 1069-1083
25. Freddi F. Cohesive interface analysis via boundary integral equations. PhD thesis, University of Bologna, Italy. http://www.distart.ing.unibo.it/www2/studenti/post-laurea/dottorato/mds/index.php; 2004.
26. Freddi F., and Frémond M. Damage in domains and interfaces: a coupled predictive theory. J Mech Mater Struct 1 7 (2006) 1205-1233
27. Freddi F., and Royer-Carfagni G. Symmetric Galerkin BEM for bodies with unconstrained contours. Comput Methods Appl Mech Engng 195 9-12 (2006) 961-981
28. Geers M.G.D. Enhanced solution control for physically and geometrically non-linear problems. Part 1: the subplane control approach. Int J Numer Methods Engng 46 (1999) 177-204
29. Hellen T.K. On the method of the virtual crack extension. Int J Numer Methods Engng 9 (1975) 187-207
30. Hillerborg A., Modeer M., and Petersson P.E. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concr Res 6 (1976) 773-782
31. Hong K.H., and Chen J.T. Derivations of integral equations of elasticity. ASCE J Engng Mech 114 (1988) 1028-1044
32. Irwin G.R. Analysis of stresses and strains near the end of a crack transversing a plate. ASME J Appl Mech 24 (1957) 361-366
33. Jansze W. Strengthening of reinforced concrete members in bending by externally bonded steel plates. PhD thesis, TU Delft, Delft; 1997.
34. Jefferson A.D. Plastic-damage model for interfaces in cementitious materials. ASCE J. Engng Mech 124 7 (1998) 775-782
35. Lu X.Z., Teng J.G., Ye L.P., and Jiang J.J. Bond-slip models for FRP sheet/plates bonded to concrete. Engng Struct 27 (2005) 920-937
36. Lu X.Z., Ye L.P., Teng J.G., and Jiang J.J. Meso-scale finite element model for FRP sheets/plates bonded to concrete. Engng Struct 27 (2005) 564-575
37. Malek A.M., Saadatmanesh H., and Ehsani M.R. Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end. ACI Struct. J 95 (1998) 142-152
38. May I.M., and Duan Y. A local arc-length procedure for strain softening. Comput Struct 64 (1997) 297-303
39. Mazzotti C, Ferracuti B, Savoia M. An experimental study on FRP-concrete delamination. In: FRAMCOS-5 conference proceedings, vol. 2; 2004. p. 795-802.
40. Mazzotti C, Savoia M, Ferracuti B. A new set-up for FRP-concrete stable delamination test. In: FRPRCS-7 conference proceedings; 2005.
41. McLean W. Strongly elliptic systems and boundary integral equations (2000), Cambridge University Press, New York
42. Monti G, Renzelli M, P. FRP adhesion to uncracked and cracked concrete zones. In: Tan, K., editor, FRPRCS-6 conference proceedings, Singapore; 2003. p. 183-92.
43. Neto P., Alfaiate J., Almeida J.R., and Pires E.B. The influence of mode II fracture on concrete strengthened with CFRP. Comput Struct 82 17-19 (2004) 1495-1502
44. Neves I.B., Chabut M., Perruchot C., Chehimi M.M., and Benzarti K. Interfacial interactions of structural adhesive components with cement pastes: Studies by inverse gas chromatography (IGC). Appl Surf Sci 238 1-4 (2004) 523-529
45. Niu H., Karbhari V., and Wu Z. Diagonal macro-crack induced debonding mechanisms in FRP rehabilitated concrete. Compos Part B: Eng 37 7-8 (2006) 627-641
46. Ortiz M., and Pandolfi A. Finite deformation irreversible cohesive elements for three dimensional crack propagation analysis. Int J Numer Methods Engng 47 (2000) 675-678
47. Pan J., and Leung C.K.Y. Debonding along FRP-concrete interface under conbined pulling/peeling effects. Engng Fract Mech 74 (2007) 132-150
48. Pomp A. The Boundary-Domain integral method for elliptic systems. With an application to shells. Lecture Notes in Mathematics (1998), Springer-Verlag, Berlin
49. Rabinovitch O. Fracture-mechanics failure criteria for RC beams strengthened with FRP strips - a simplified approach. Compos Struct 64 3-4 (2004) 479-492
50. Rice J.R. A path independent integral and the approximate analysis of strain concentration by notches and cracks. ASME J Appl Mech 24 (1957) 361-366
51. Riks E. An incremental approach to the solution of snapping and buckling problems. Int J Solids Struct 15 (1979) 529-551
52. Roberts TM and Haji-Kazemi H. Theoretical study of the behavior of reinforced concrete beams strengthened by externally bonded steel plates. In: Proceedings of the Institution of Civil Engineers, vol. 2, London, UK; 1989. p. 39-55.
53. Rybicki E.F., and Kanninen M.F. A finite element calculation of stress intensity factors by a modified crack closure integral. Engng Frac Mech 9 (1977) 931-938
54. Salvadori A. A symmetric boundary integral formulation for cohesive interface problems. Comput Mech 32 4-6 (2003) 381-391
55. Salvadori A, Freddi F. Cohesive interfaces stress analysis via boundary integral equations. In: IABEM conference proceedings, UT Austin, TX, USA; 2002.
56. Savoia M, Ferracuti B, Mazzotti C. Delamination of FRP plate/sheets used for strengthening of r/c elements. In: De Borst R, editor, Second international conference on Structural Engineering and Construction (ISEC-02),Rome, IT; 2003. p. 1375-81.
57. Savoia M, Ferracuti B, Mazzotti C. Non linear bond-slip law for FRP-concrete delamination. In: Tan, K., editor, FRPRCS-6 conference proceedings, Singapore, 2003, p. 1-10.
58. Savoia M, Mazzotti C, Ferracuti B. Mode II fracture energy and interface law for FRP concrete bonding with different concrete surface preparations. In FRAMCOS-6 conference proceedings, Catania, IT; 2007.
59. Schwab C., and Wendland W. Kernel properties and representations of boundary integral operators. Numer Math 156 (1992) 187-218
60. Smith J.G., and Teng J. Interfacial stresses in plated beams. Engng Struct 23 (2001) 857-871
61. Taljsten B. Strengthening of concrete prisms using the plate bonding technique. Int J Fract 43 (1996) 1-18
62. Teng J.G., Chen J.F., Smith S.T., and Lam L. FRP strengthened RC structures (2002), John Wiley and Sons, UK
63. Teng J.G., Yuan H., and Chen J.F. FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure. Int J Solids Struct 43 18-19 (2006) 5750-5778
64. Toutanji H., and Ortiz G. The effect of surface preparation on the bond interface between FRP sheets and concrete members. Compos Struct 53 (2001) 457-462
65. Volkersen O. Die nietkraftverteilung in zugbeanspruchenden nietverbindungen mit konstanten laschen-querschnitten. Luftfahrtforschung 15 (1938) 41-47
66. Wang J. Cohesive zone model of FRP-concrete interface debonding under mixed-mode loading. Int J Solids Struct; in press, doi:10.1016/j.ijsolstr.2007.02.042.
67. Wendland W.L. Variational methods for BEM. In: Morino L., and Piva R. (Eds). Boundary integral methods (theory and applications) (1990), Springer-Verlag
68. Wu Z., Yuan H., and Niu H. Stress transfer and fracture propagation in different kinds of adhesive joints. ASCE J Engng Mech 128 (2002) 562-573
69. Yang J., and Ye J. Interfacial stresses in plated beams with cracks. Compos Struct 57 1 (2002) 125-134
70. Yuan H., Teng J.G., Seracino R., Wu Z.S., and Yao J. Full-range behavior of FRP-to-concrete bonded joints. Engng Struct 26 (2004) 553-565
71. Zou Z., Reid S.R., and Li S. A continuum damage model for delamination in laminated composites. J Mech Phys Solids 51 (2003) 333-356
72. Zou Z., Reid S.R., Soden P.D., and Li S. Mode separation of energy release rate for delamination in composite laminates using sublaminates. Int J Solids Struct 38 (2001) 2597-2613