Debonding analysis of fiber-reinforced-polymer strengthened beams: Cohesive zone modeling versus a linear elastic fracture mechanics approach

Engineering Fracture Mechanics

Volumn 75, Issue 10, 2008, Pages 2842-2859

  Rabinovitch, Oded ^a  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

Civil engineering structures; Cohesive zone modeling; Crack growth; Debonding; Fracture mechanics; J Integral

Indexed keywords

CRACK PROPAGATION; DEBONDING; DIFFERENTIAL EQUATIONS; ENERGY RELEASE RATE; FIBER REINFORCED PLASTICS; FRACTURE MECHANICS; PEELING; SHEAR DEFORMATION; STRESS ANALYSIS;

COHESIVE ZONE MODELING; J-INTEGRAL; LINEAR ELASTIC FRACTURE MECHANICS;

CONCRETE BEAMS AND GIRDERS;

CONCRETE BEAMS AND GIRDERS; CRACK PROPAGATION; DEBONDING; DIFFERENTIAL EQUATIONS; ENERGY RELEASE RATE; FIBER REINFORCED PLASTICS; FRACTURE MECHANICS; PEELING; SHEAR DEFORMATION; STRESS ANALYSIS;

EID: 40849106332     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2008.01.003     Document Type: Article

References (33)

1. Smith S.T., and Teng J.G. FRP-strengthened RC beams. I: Review of debonding strength models. Engng Struct 24 4 (2002) 385-395
2. Smith S.T., and Teng J.G. FRP-strengthened RC beams. II: Assessment of debonding strength models. Engng Struct 24 4 (2002) 397-417
3. Buyukozturk O., Gunes O., and Karaca E. Progress on understanding debonding problems in reinforced concrete and steel members strengthened with FRP composites. Construct Build Mater 18 1 (2004) 1-19
4. Karbhari V.M., Niu H., and Sikorsky C. Review and comparison of fracture mechanics based bond strength models for FRP strengthened structures. J Reinforced Plastics Compos 25 17 (2006) 1757-1794
5. Xu X.-P., and Needleman A. Numerical simulations of fast crack growth in brittle solids. J Mech Phys Solid 42 9 (1994) 1397-1434
6. Taljsten B. Strengthening of concrete prism using the plate-bonding technique. Int J Fract 82 3 (1996) 253-266
7. Wu Z., and Yin J. Fracturing behaviors of FRP strengthened concrete structures. Engng Fract Mech 70 10 (2003) 1339-1355
8. Yuan H., Teng J.G., Seracino R., Wu Z.S., and Yao J. Full-range behavior of FRP to concrete bonded joints. Engng Struct 26 5 (2004) 553-565
9. Niu H., and Wu Z. Numerical analysis of debonding mechanism in FRP-strengthened RC beams. Computer-aided Civil Infrastructure Engng 20 5 (2005) 354-368
10. Lu X.Z., Teng J.G., Ye L.P., and Jiang J.J. Bond-slip models for FRP sheets/plates bonded to concrete. Engng Struct 27 6 (2005) 920-937
11. Wang J. Cohesive zone model of intermediate crack induced debonding of FRP-plated reinforced concrete beam. Int J Solid Struct 43 21 (2006) 6630-6648
12. Wang J. Debonding of FRP plated reinforced concrete beam, a bond-slip analysis. I: Theoretical formulation. Int J Solid Struct 43 21 (2006) 6649-6664
13. Teng J.G., Yuan H., and Chen J.F. FRP-to-concrete interfaces between two adjacent cracks. Theoretical model for debonding failure. Int J Solid Struct 43 18-19 (2006) 5750-5778
14. Ferracuti B., Savoia M., and Mazzotti C. A numerical model for FRP-concrete delamination. Compos Pt B: Engng 37 4-5 (2006) 356-364
15. Dai J., Ueda T., and Sato Y. Development of nonlinear bond-slip model for fiber reinforced plastics sheet-concrete interfaces with a simple method. J Compos Construct 9 1 (2005) 52-62
16. Lu X.Z., Ye L.P., Teng J.G., and Jiang J.J. Meso-scale finite element model for FRP sheets/plates bonded to concrete. Engng Struct 27 4 (2005) 564-575
17. Cho K., Cho J.-R., Chin W.-J., and Kim B.-S. Bond-slip model for coarse sand coated interface between FRP and concrete from optimization technique. Comput Struct 84 7 (2006) 439-449
18. Rabinovitch O. Cohesive interface modeling of debonding failure in FRP strengthened beams. J Engng Mech (accepted for publication).
19. Yang Q.S., Peng X.R., and Kwan A.K.H. Strain energy release rate for interfacial cracks in hybrid beams. Mech Res Commun 33 6 (2006) 796-803
20. Au C., and Buyukozturk O. Debonding of FRP plated concrete: a tri-layer fracture treatment. Engng Fract Mech 73 3 (2006) 348-365
21. Greco F., Lonetti P., and Blasi N. An analytical investigation of debonding problems in beams strengthened using composite plates. Engng Fract Mech 74 3 (2007) 346-372
22. Rabinovitch O., and Frostig Y. Closed-form high-order analysis of RC beams strengthened with FRP strips. J Compos Construct 4 2 (2000) 65-74
23. Rice J.R. A path independent integral and the approximated analysis of strain concentration by notches and cracks. J Appl Mech, Trans ASME 35 6 (1968) 379-386
24. Rabinovitch O., and Frostig Y. Delamination failure of RC beams strengthened with FRP strips - a closed-form high-order and fracture mechanics approach. J Engng Mech 127 8 (2001) 852-861
25. Rabinovitch O. Fracture-mechanics failure criteria for RC beams strengthened with FRP strips - a simplified approach. Compos Struct 64 3-4 (2004) 479-492
26. Rabinovitch O., and Frostig Y. Delamination effects in RC slabs strengthened with circular composite patches. J Engng Mech 130 12 (2004) 1436-1446
27. Rabinovitch O., and Frostig Y. Fracture mechanics approach to geometrically nonlinear debonding problems in RC beams strengthened with composite materials. Adv Struct Engng 9 6 (2006) 765-777
28. Volokh K.Yu., and Needleman A. Buckling of sandwich beams with compliant interfaces. Comput Struct 80 14-15 (2002) 1329-1335
29. Vinson J.R., and Sierakowski R.L. The behaviour of structures composed of composite materials (1986), Martinus-Nijhoff Inc., Dordrecht, The Netherlands
30. Stoer J., and Bulirsch R. Introduction to numerical analysis (1993), Springer-Verlag, New York
31. Volokh K.Yu. Comparison between cohesive zone models. Commun Numer Method Engng 20 11 (2004) 845-856
32. Sebastian W.M. Significance of midspan debonding failure in FRP-plated concrete beams. J Struct Engng 127 7 (2001) 792-798
33. Rabinovitch O., and Frostig Y. Experiments and analytical comparison of RC beams strengthened with externally bonded CFRP strips. Compos Pt B: Engng 34 8 (2003) 663-667