Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements

International Journal of Solids and Structures

Volumn 45, Issue 20, 2008, Pages 5419-5436

  De Lorenzis, Laura ^a   Zavarise, Giorgio ^a  

^a UNIVERSITY OF SALENTO   (Italy)

Author keywords

Cohesive zone modeling; Contact mechanics; Fiber reinforced polymers; Finite element method; Interface debonding; Mixed mode fracture; Peel test

Indexed keywords

BRITTLENESS; DEBONDING; FIBER OPTICS; FIBER REINFORCED PLASTICS; FINITE ELEMENT METHOD; FRACTURE FIXATION; FRACTURE MECHANICS; NUMERICAL METHODS; PEELING; REINFORCED PLASTICS; SPEED; STRENGTH OF MATERIALS; STRESSES; SUBSTRATES; TESTING;

ANALYTICAL MODELLING; ANALYTICAL PREDICTIONS; BONDED JOINTS; BRITTLE SUBSTRATES; COHESIVE INTERFACE; COHESIVE ZONE MODELING; CONSTITUTIVE LAWS; CONTACT ELEMENTS; CONTACT MECHANICS; DIMENSIONAL ANALYSIS; ENERGY APPROACH; EXISTING STRUCTURES; FIBER REINFORCED POLYMERS; FIBER-REINFORCED POLYMER; FINITE ELEMENT CODE; FRP SHEETS; INTERFACE DEBONDING; INTERFACIAL SHEAR; LINEAR-ELASTIC FRACTURE MECHANICS; MAIN PARAMETERS; MIXED MODES; MIXED-MODE FRACTURE; MIXED-MODE LOADING; NORMAL STRESSES; NUMERICA L RESULTS; NUMERICAL MODELLING; PEEL ANGLE; PEEL TEST; PEEL TESTING; TANGENTIAL DIRECTIONS; UNIFIED FRAMEWORK;

BOND LENGTH;

EID: 48949101843     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2008.05.024     Document Type: Article

References (39)

1. Aravas N., Kim K.S., and Loukis M.J. On the mechanics of adhesion testing of flexible films. Materials Science and Engineering A107 (1989) 159-168
2. Bastianini, F., 2003. Non-Destructive Techniques for Quality Assessment and Monitoring of Bonding in External FRP Strengthenings. Ph.D. thesis, University of Lecce, Italy.
3. Bikerman J.J. Theory of peeling through a Hookean solid. Journal of Applied Physics 28 12 (1957) 1484-1485
4. Bruno D., Carpino R., and Greco F. Modelling of mixed-mode debonding in externally FRP reinforced beams. Composites Science and Technology 67 (2007) 1459-1474
5. Chen J.F., and Teng J.G. Anchorage strength models for FRP and steel plates bonded to concrete. Journal of Structural Engineering, ASCE 127 7 (2001) 784-791
6. CNR-DT 200/2004, 2004. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Existing Structures - Materials, RC and PC structures, masonry structures, CNR, Rome, 13 July 2004 (English version).
7. Crocombe A.D., and Adams R.D. An elasto-plastic investigation of the peel test. Journal of Adhesion 13 (1982) 241-267
8. Cui J., Wang R., Sinclair A.N., and Spelt J.K. A calibrated finite element model of adhesive peeling. International Journal of Adhesion and Adhesives 23 (2003) 199-206
9. Dai, J.G., Ueda, T., Sato, Y., Hadiyono, J., 2004. Dowel resistances of bond interfaces between FRP sheets and concrete. In: Proceedings of the Second International Conference on FRP Composites in Civil Engineering, Adelaide, Australia, pp. 371-379.
10. De Lorenzis L., Miller B., and Nanni A. Bond of FRP laminates to concrete. ACI Materials Journal 98 3 (2001) 256-264
11. De Lorenzis L., Teng J.G., and Zhang L. Elastic interfacial stresses in curved members bonded with a thin plate. International Journal of Solids and Structures 43 25-26 (2006) 7501-7517
12. Ferracuti B., Savoia M., and Mazzotti C. A numerical model for FRP-concrete delamination. Composites, Part B 37 4-5 (2006) 356-364
13. Gent A.N., and Hamed G.R. Peel mechanics. Journal of Adhesion 7 (1975) 91-95
14. Hillerborg A., Modeer M., and Peterson P. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research 6 (1976) 773-782
15. Högberg J.L. Mixed mode cohesive law. International Journal of Fracture 141 (2006) 549-559
16. Holzenkämpfer, P., 1994. Ingenieurmodelle des verbundes geklebter bewehrung für betonbauteile. Dissertation, TU Braunschweig.
17. Kafkalidis M.S., and Thouless M.D. The effects of geometry and material properties on the fracture of single lap-shear joints. International Journal of Solids and Structures 39 (2002) 4367-4383
18. Karbhari V.M., Engineer M., and Eckel II D.A. On the durability of composite rehabilitation schemes for concrete: use of a peel test. Journal of Materials Science 32 (1997) 147-156
19. Kim K.S., and Aravas N. Elastoplastic analysis of the peel test. International Journal of Solids and Structures 24 4 (1988) 417-435
20. Li S., Thouless M.D., Waas A.M., Schroeder J.A., and Zavattieri P.D. Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer-matrix composite. Engineering Fracture Mechanics 73 (2006) 64-78
21. Paggi, M., 2005. Interface Mechanical Problems in Heterogeneous Materials. Ph.D. Thesis, Politecnico di Torino, Torino, Italy.
22. Pan J., and Leung C.K.Y. Debonding along the FRP-concrete interface under combined pulling/peeling effects. Engineering Fracture Mechanics 74 (2007) 132-150
23. Spies G.J. The peeling test on redux-bonded joints. Journal of Aircraft Engineering 25 (1953) 64-70
24. Suo Z., and Hutchinson J.W. Interface crack between two elastic layers. International Journal of Fracture 43 (1990) 1-18
25. Taljsten B. Strengthening of concrete prisms using the plate-bonding technique. Engineering Fracture Mechanics 82 (1996) 253-266
26. Thouless M.D., and Jensen H.M. Elastic fracture mechanics of the peel-test geometry. Journal of Adhesion 38 (1992) 185-197
27. Thouless, M.D., Parmigiani, J.P., 2007. Mixed-mode cohesive-zone models for delamination and deflection in composites. In: Sørensen, B.F., Mikkelsen, L.P., Lilholt, H., Goutianos, S., Abdul-Mahdi, F.S. (Eds.), Proceedings of the 28th Risø International Symposium on Materials Science, Roskilde, Denmark, September, 2007.
28. Thouless M.D., and Yang Q.D. A parametric study of the peel test. International Journal of Adhesion and Adhesives 28 (2008) 176-184
29. Tvergaard V. Effect of fiber debonding in a whisker-reinforced metal. Materials Science and Engineering A125 (1990) 203-213
30. Van den Bosch M.J., Schreurs P.J.G., and Geers M.G.D. An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion. Engineering Fracture Mechanics 73 (2006) 1220-1234
31. Wan B., Sutton M.A., Petrou M.F., Harries K.A., and Li N. Investigation of bond between fiber reinforced polymer and concrete undergoing global mixed mode I/II loading. ASCE Journal of Engineering Mechanics 130 12 (2004) 1467-1475
32. Wei Y., and Hutchinson J.W. Interface strength, work of adhesion and plasticity in the peel test. International Journal of Fracture 93 (1998) 315-333
33. Williams J.G. Energy release rate for the peeling of flexible membranes and the analysis of blister tests. International Journal of Fracture 87 (1997) 265-288
34. Wriggers P., Zavarise G., and Zohdi T.I. A computational study of interfacial debonding damage in fibrous composite materials. Computational Materials Science 12 (1998) 39-56
35. Xu X.P., and Needleman A. Void nucleation by inclusion debonding in a crystal matrix. Modelling and Simulation in Materials Science and Engineering 1 2 (1993) 111-132
36. Yao J., Teng J.G., and Chen J.F. Experimental study on FRP-to-concrete bonded joints. Composites: Part B 36 (2005) 99-113
37. Yuan H., Teng J.G., Seracino R., Wu Z.S., and Yao J. Full-range behaviour of FRP-to-concrete bonded joints. Engineering Structures 26 (2004) 553-565
38. Yuan H., Chen J.F., Teng J.G., and Lu X.Z. Interfacial stress analysis of a thin plate bonded to a rigid substrate and subjected to inclined loading. International Journal of Solids and Structures 44 (2007) 5247-5271
39. Zavarise, G., 1991. Problemi termomeccanici di contatto - aspetti fisici e computazionali. Ph.D. Thesis, Università di Padova, Padova, Italy.