On experimental methods to investigate the effect of layer thickness on the fracture behavior of adhesively bonded joints

International Journal of Adhesion and Adhesives

Volumn 31, Issue 8, 2011, Pages 840-850

  Marzi, Stephan ^a   Biel, Anders ^b   Stigh, Ulf ^b  

^a FRAUNHOFER INSTITUTE FOR MANUFACTURING TECHNOLOGY AND ADVANCED MATERIALS IFAM   (Germany)

^b UNIVERSITY OF SKÖVDE   (Sweden)

Author keywords

(Tapered) Double Cantilever Beam (TDCB DCB) test; Adhesive bonding; End Notch Flexure (ENF) test; End Loaded Shear Joint (ELSJ) test; Energy release rate; Fracture mechanics

Indexed keywords

ADHESIVE BONDING; DOUBLE CANTILEVER BEAM; END-NOTCH FLEXURES; ENERGY RELEASE; SHEAR JOINTS;

ADHESIVE JOINTS; FRACTURE; FRACTURE MECHANICS; NANOCANTILEVERS; PILE FOUNDATIONS;

CANTILEVER BEAMS;

EID: 80053984118     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2011.08.004     Document Type: Article

References (41)

1. O. Volkersen Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten Luftfahrtforschung 1938 41 47
2. M. Goland, and E. Reissner The stresses in cemented joints J Appl Mech 1944 17
3. Hart-Smith L. Adhesive-bonded double lap joints, Technical Report, NASA, Langley Research Center, 1973. CR-112235.
4. R. Adams, J. Comyn, and W. Wake Structural adhesive joints in engineering 2 ed 1997 Chapman and Hall
5. Ripling E, Mostovoy S, Patrick R. Application of fracture mechanics to adhesive joints. In: ASTM STP 360; 1963
6. A. Kinloch Adhesion and adhesives - science and technology 1987 Chapman and Hall London
7. Z. Suo, G. Bao, and B. Fan Delamination r-curve phenomena due to damage J Mech Phys Solids 40 1992 1 16
8. U. Stigh, K. Alfredsson, T. Andersson, A. Biel, T. Carlberger, and K. Salomonsson Some aspects of cohesive models and modelling with special application to strength of adhesive layers Int J Fract 165 2010 149 162
9. ASTM D3433-99, 2005.
10. BS 7991:2001, 2001.
11. B. Blackman, A. Kinloch, M. Paraschi, and W. Teo Measuring the mode I adhesive fracture energy, GIC, of structural adhesive joints: the results of an international round robin Int J Adhes Adhes 23 2003 293 305
12. A. Biel, and U. Stigh An analysis of the evaluation of the fracture energy using the DCB-specimen Arch Mech 59 2007 311 327
13. A. Biel, and U. Stigh Effects of constitutive parameters on the accuracy of measured fracture energy using DCB-specimen Eng Fract Mech 75 2008 2968 2983
14. T. Andersson, and U. Stigh The stress-elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces Int J Solids Struct 41 2004 413 434 (Pubitemid 38002908)
15. V. Tamuzs, S. Tarasovs, and U. Vilks Delamination properties of translaminar-reinforced composites Compos Sci Technol 63 2003 1423 1431 (Pubitemid 36815270)
16. B. Blackman, H. Hadavinia, A. Kinloch, and J. Williams The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints Int J Fract 119 2003 25 46 (Pubitemid 36854877)
17. B. Blackman, H. Hadavinia, A. Kinloch, M. Paraschi, and J. Williams The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam test Eng Fract Mech 70 2003 233 248 (Pubitemid 36036259)
18. Blackman B, Kinloch A. Fracture mechanics testing for polymers adhesives and composites. Amsterdam: Elsevier Sci. 2001.
19. W. Teo, B. Blackman, A. Kinloch, and F. Rodriguez-Sanchez The analysis of fracture mechanics data from high rate tests 30th Annual meeting of the adhesion society 2007 39 41 ISBN1086-9506
20. S. Marzi, O. Hesebeck, M. Brede, and F. Kleiner A rate-dependent cohesive zone model for adhesive layers loaded in mode I J Adh Sci Tech 23 2009 881 898
21. Russel A, Street K. Factors effecting the interlaminar fracture energy of graphite/epoxy laminates. In: Progress in science and engineering of composites, 1998 pp. 27986.
22. K. Alfredsson On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen Int J Solids Struct 41 2004 4787 4807 (Pubitemid 38814642)
23. K. Leffler, K. Alfredsson, and U. Stigh Shear behaviour of adhesive layers Int J Solids Struct 44 2006 530 545 (Pubitemid 44737498)
24. Stigh U, Alfredsson K, Biel A. Measurement of cohesive laws and related problems. In: Proceedings of the ASME Int Mech Eng Congress and Exposition; 2009
25. H. Daghyani, L. Ye, and Y.-W. Mai Evaluation of mode-II fracture energy of adhesive joints with different bond thickness J Adhes 56 1996 171 186 (Pubitemid 126573567)
26. S. Marzi, O. Hesebeck, M. Brede, and F. Kleiner An end-loaded shear joint (ELSJ) specimen to measure the critical energy release rate in mode II of tough, structural adhesive joints J Adh Sci Tech 23 2009 1883 1891
27. S. Mostovoy, P. Crosley, and E. Ripling Use of crack-line-loaded specimens for measuring plane-strain fracture toughness J Mater 2 1967
28. J. Berry Determination of fracture surface energies by the cleavage technique J Appl Phys 34 1963 62 68
29. A. Paris, and P. Paris Instantaneous evaluation of J and C Int J Fract 38 1988 19 21
30. T. Carlberger, and U. Stigh Dynamic testing and simulation of hybrid joined bi-material beam Thin-Walled Struct 48 2010 609 619
31. B. Sørensen Cohesive law and notch sensitivity of adhesive joints Acta Mater 50 2002 1053 1061 (Pubitemid 34181945)
32. T. Andersson, and A. Biel On the effective constitutive properties of a thin adhesive layer loaded in peel Int J Fract 141 2006 227 249
33. Marzi S, Hesebeck O, Brede M, Kleiner F. A rate-dependent, elasto-plastic cohesive zone mixed-mode model for crash analysis of adhesively bonded joints. In: 7th European LS-DYNA conference. Salzburg, 2009
34. T. Carlberger, A. Biel, and U. Stigh Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive Int J Fract 155 2009 155 166
35. T. Carlberger, and U. Stigh Influence of layer thickness on cohesive properties of an epoxy-based adhesive - an experimental study J Adhes 86 2010 814 833
36. S. Fernberg, and L. Berglund Bridging law and toughness characterisation of csm and smc composites Compos Sci Tech 61 2001 2445 2454 (Pubitemid 34004571)
37. Alfredsson K, Biel A, Leffler K. An experimental method to determine the complete stress-deformation relation for a structural adhesive layer loaded in shear. In: Proceedings of 9th international conference on the mech. behaviour of materials, Geneva.
38. L. Carlsson, J. Gillespie, and B. Trethewey Mode II interlaminar fracture of graphite/epoxy and graphite/peek J Reinf Plast Compos 5 1986 170 187 (Pubitemid 16591773)
39. H. Chai, and S. Mall Design aspects of the end-notched adhesive joint specimen Int J Fract 36 1988 R3 R8
40. Walander T. System for measurement of cohesive laws. Masters thesis. University of Skövde; 2009.
41. W. Bascom, and R. Cottington Effect of temperature on the adhesive fracture behaviour of an elastomer-epoxy resin J Adhes 7 1976 333 346