Dynamic testing and simulation of hybrid joined bi-material beam

Thin-Walled Structures

Volumn 48, Issue 8, 2010, Pages 609-619

  Carlberger, Thomas ^a   Stigh, Ulf ^b  

^a SAAB Automobile AB ^*  (Sweden)

^b UNIVERSITY OF SKÖVDE   (Sweden)

Author keywords

Adhesive joining; Cohesive elements; Energy absorption; Fracture energy; Hybrid joining

Indexed keywords

ADHESIVE JOINING; APPLIED LOADS; BI-MATERIAL; BIMATERIAL JOINTS; COHESIVE ELEMENT; COHESIVE ELEMENTS; COHESIVE FINITE ELEMENT; DEFORMATION MODES; DYNAMIC TESTING; GOOD CORRELATIONS; HYBRID JOINING; HYBRID JOINTS; IMPACT ENERGY; JOINT CONFIGURATION; JOINT INTEGRITY; LOW VELOCITY IMPACT; MECHANICAL FASTENER;

ABSORPTION; ENERGY ABSORPTION; FATIGUE CRACK PROPAGATION; FRACTURE; FRACTURE ENERGY; IMPACT TESTING; LOCKS (FASTENERS); RIVETING; STRESS CONCENTRATION;

EXPERIMENTS;

EID: 77955326630     PISSN: 02638231     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tws.2010.03.003     Document Type: Article

References (35)

1. T.J.R. Hughes The Finite Element Method 2000 Dover New York
2. R. Courant, K. Friedrichs, and H. Lewy ber die partiellen differenzengleichungen der mathematischen physik, (on the partial difference equations of mathematical physics) Mathematische Annalen 100 1928 32 74
3. T. Carlberger, K.S. Alfredsson, and U. Stigh Explicit FE-formulation of interphase elements for adhesive joints International Journal of Computational Methods in Engineering Science and Mechanics 9 5 2008 288 299
4. A. Rossi, Z. Fawaz, and K. Behdinan Numerical simulation of the axial collapse of thin-walled polygonal section tubes Thin-Walled Structures 43 10 2005 1646 1661
5. J. Marsolek, and H.-G. Reimerdes Energy absorption of metallic cylindrical shells with non-axisymmetric folding patterns International Journal of Impact Engineering 30 89 2004 1209 1223
6. Zhang Xiong, Cheng Gengdong, and Zhang Hui Theoretical prediction and numerical simulation of multi-cell square thin-walled structures Thin-Walled Structures 44 11 2006 1185 1191
7. V. Tarigopula, M. Langseth, O.S. Hopperstad, and A.H. Clausen Axial crushing of thin-walled high-strength steel sections International Journal of Impact Engineering 32 5 2006 847 882
8. Song Hong-Wei, Fan Zi-Jie, Yu Gang, Wang Qing-Chun, and A. Tobota Partition energy absorption of axially crushed aluminum foam-filled hat sections International Journal of Solids and Structures 42 9-10 2005 2575 2600
9. Xiang Yujiang, Wang Qian, Fan Zijie, and Fang Hongbing Optimal crashworthiness design of a spot-welded thin-walled hat section Finite Elements in Analysis and Design 42 10 2006 846 855
10. G. Belingardi, L. Goglio, and M. Rossetto Impact behaviour of bonded built-up beams: experimental results International Journal of Adhesion and Adhesives 25 2 2005 173 180
11. B.P. DiPaolo, and J.G. Tom A study on an axial crush configuration response of thin-wall, steel box components: the quasi-static experiments International Journal of Solid and Structures 43 2006 7752 7775
12. D.C. Han, and S.H. Park Collapse behavior of square thin-walled columns subjected to oblique loads Thin-Walled Structures 35 1999 167 184
13. A.G. Hanssen, M. Langseth, and O.S. Hopperstad Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler International Journal of Impact Engineering 24 2000 475 507 (Pubitemid 30567340)
14. He Jianmei, Y.M. Martin, Chiang, L. Donald, and Hunston Assessment of sandwich beam in three-point bending for measuring adhesive shear modulus ASME Journal of Engineering Materials and Technology 123 2001 90
15. H.-S. Kim, and T. Wierzbicki Effect of the cross-sectional shape of hat-type cross sections on crash resistance of an "S"-frame Thin-Walled Structures 39 7 2001 535 554
16. W. Chen Experimental and numerical study on bending collapse of aluminum foam-filled hat profiles International Journal of Solids and Structures 38 4445 2001 7919 7944
17. S. Santosa, J. Banhart, and T. Wierzbicki Experimental and numerical analyses of bending of foam-filled sections Acta Mechanica 148 14 2001 199 213
18. Chang Baohua, Shi Yaowu, and Lu Liangqing Studies on the stress distribution and fatigue behavior of weld-bonded lap shear joints Journal of Materials Processing Technology 108 2001 307 313
19. S.M.H. Darwish, and A. Ghanya Critical assessment of weld-bonded technologies Journal of Materials Processing Technology 105 2000 221 229
20. S.M. Darwish, and A.M. Al-Samhan Peel and shear strength of spot-welded and weld-bonded dissimilar thickness joints Journal of Materials Processing Technology 147 2004 51 59
21. S.M. Darwish, and A. Al-Samhan Design rationale of weld-bonded joints International Journal of Adhesion & Adhesives 24 2004 367 377
22. V.M. Gonalves, and P.A.F. Martins Joining stainless steel parts by means of weld bonding International Journal of Mechanics and Materials in Design 3 2006 91 101
23. G. Kelly Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints Composite Structures 72 2006 119 129
24. Kunc V, Erdman D, Klett L. Hybrid joining in automotive applications. In: International SAMPE Symposium and Exhibition (Proceedings), v. 49, SAMPE 2004 Conference Proceedings Materials and Processing Technology 60 Years of SAMPE Progress, 2004, p. 392639.
25. I.O. Santos, W. Zhang, V.M. Gonalves, N. Bay, and P.A.F. Martins Weld bonding of stainless steel International Journal of Machine Tools & Manufacture 44 2004 1431 1439
26. Federal Safety Standards MVSS 214. Motor Vehicle Safety Standard No. 214 Side Impact Protection. Effective Date January 1, 1973.
27. Federal Safety Standards MVSS 216. Motor Vehicle Safety Standard No. 216 Roof Crush Resistance Passenger Cars & Light Trucks, (GVWR 6.000 Pounds or Less). EffectiveSeptember 1, 1973.
28. R. Porcaro, A.G. Hanssen, M. Langseth, and A. Aalberg The behaviour of a self-piercing riveted connection under quasi-static loading conditions International Journal of Solids and Structures 43 2006 5110 5131
29. J. Varis Economics of clinched joint compared to riveted joint and example of applying calculations to a volume product Journal of Materials Processing Technology 172 2006 130 138
30. T. Andersson, and A. Biel On the effective constitutive properties of a thin adhesive layer loaded in peel International Journal of Fracture 141 2006 227 246 10.1007/s10704-006-0075-6
31. K. Leffler, K.S. Alfredsson, and U. Stigh Shear behaviour of adhesive layers International Journal of Solids and Structures 44 2 2007 530 545 10.1016/j.ijsolstr.2006.04.036
32. T. Carlberger, A. Biel, and U. Stigh Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive International Journal of Fracture 155 2009 155 166
33. J.L. Hgberg, and U. Stigh Specimen proposals for mixed mode testing of adhesive layer Engineering Fracture Mechanics 73 2006 2541 2556
34. M.L. Benzeggagh, and M. Kenane Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus Composites Science and Technology 56 1996 439 449
35. Biel A. Cohesive laws for adhesives at repeated loadingan experimental method. Paper F in Mechanical Behaviour of Adhesive Layers. Thesis for the Ph.D. degree, Chalmers University of Technology, Gteborg, Sweden, 2008.