Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive

International Journal of Fracture

Volumn 155, Issue 2, 2009, Pages 155-166

  Carlberger, Thomas ^a   Biel, Anders ^b   Stigh, Ulf ^b  

^a SAAB AB   (Sweden)

^b UNIVERSITY OF SKÖVDE   (Sweden)

Author keywords

Cohesive law; Crashworthiness; DCB specimen; ENF specimen; Experimental; Strain rate; Temperature dependence

Indexed keywords

COHESIVE LAW; DCB-SPECIMEN; ENF-SPECIMEN; EXPERIMENTAL; TEMPERATURE DEPENDENCE;

ATOMIC FORCE MICROSCOPY; CANTILEVER BEAMS; CRASHWORTHINESS; EPOXY RESINS; EXPERIMENTS; FRACTURE; FRACTURE ENERGY; NANOCANTILEVERS; PILE FOUNDATIONS; PLASTICITY; TEMPERATURE DISTRIBUTION;

STRAIN RATE;

EID: 67349231905     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-009-9337-4     Document Type: Article

References (32)

1. Alfredsson KS (2004) On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen. Int J Solids Struct 41:4787-4807. doi: 10.1016/j.ijsolstr.2004.03.008
2. Alfredsson KS, Biel A, Leffler K (2003) An experimental method to determine the complete stress-deformation relation for a structural adhesive layer loaded in shear. In: Proceedings of the 9th international conference on the mechanical behaviour of materials, Geneva, Switzerland, 2002
3. Andersson T, Biel A (2006) On the effective constitutive properties of a thin adhesive layer loaded in peel. Int J Fract 141:227-246. doi: 10.1007/s10704-006-0075-6
4. Andersson T, Stigh U (2004) The stress-elongation relation for an adhesive layer loaded in modus I using equilibrium of energetic forces. Int J Solids Struct 41:413-434. doi: 10.1016/j.ijsolstr.2003.09.039
5. Ashcroft IA, Hughes DJ, Shaw SJ (2001) Mode I fracture of epoxy bonded composites joints: 1. Quasi-static loading. Int J Adhes Adhesives 21:87-99. doi: 10.1016/S0143-7496(00)00038-5
6. Bascom WD, Cottington RL (1976) Effect of temperature on the adhesive fracture behaviour of an elastomer-epoxy resin. J Adhes 7:333-346. doi: 10.1080/00218467608075063
7. Biel A (2008) Cohesive laws for adhesives at repeated loading - an experimental method (in preparation)
8. Biel A, Carlberger T (2007) Influence of temperature on cohesive parameters for adhesives. In: Sørensen BF, Mikelsen LP, Lilholt H, Goutianos S, Abdul-Mahdi FS (eds) Procceedings of 28th Risø international symposium on materials science
9. Biel A, Stigh U (2007) An analysis of the evaluation of the fracture energy using the DCB-specimen. Arch Mech 59:311-327
10. Biel A, Stigh U (2008) Effects of constitutive parameters on the accuracy of measured fracture energy using the DCB-specimen. Eng Fract Mech 75: 2968-2983. doi: 10.1016/j.engfracmech.2008.01.002
11. Blackman BRK, Kinloch AJ, Taylor AC, Wang Y (2000) The impact wedge-peel performance of structural adhesives. J Mater Sci 35:1867-1884. doi: 10.1023/A:1004793730352
12. Blackman BRK, Hadavinia H, Kinloch AJ, Williams JG (2003) The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints. Int J Fract 119:25-46. doi: 10.1023/ A:1023998013255
13. Carlberger T, Stigh U (2007) An explicit FE-model of impact fracture in an adhesive joint. Eng Fract Mech 74:2247-2262. doi: 10.1016/ j.engfracmech.2006.10.016
14. Chai H (2004) The effects of bond thickness, rate and temperature on the deformation and fracture of structural adhesives under shear loading. Int J Fract 130:497-515. doi: 10.1023/B:FRAC.0000049504.51847.2a
15. Guo C, Sun CT (1998) Dynamic mode-I crack-propagation in a carbon/epoxy composite. Compos Sci Technol 58:1405-1410. doi: 10.1016/ S0266-3538(98)00025-6
16. Högberg JL, Sørensen BF, Stigh U (2007) Constitutive behaviour of mixed mode loaded adhesive layer. Int J Solids Struct 44:8335-8354. doi: 10.1016/j.ijsolstr.2007.06.014
17. Kinloch AJ (1987) Adhesion and adhesives - science and technology. Chapman and Hall, London
18. Kinloch AJ, Shaw SJ (1981) The fracture resistance of a toughened epoxy adhesive. J Adhes 12:59-77. doi: 10.1080/00218468108071189
19. Kusaka T, Hojo M, Mai Y, Kurokawa T, Nojima T, Ochiai S (1998) Rate dependence of mode-I fracture behaviour in carbon-fibre/epoxy composite laminates. Compos Sci Technol 58:591-602. doi: 10.1016/ S0266-3538(97)00176-0
20. Leffler K, Alfredsson KS, Stigh U (2007) Shear behaviour of adhesive layers. Int J Solids Struct 44: 530-545. doi: 10.1016/ j.ijsolstr.2006.04.036
21. Lutz A, Schneider D (2006) Toughened epoxy adhesive composition. USPTO Applicaton #: 20060276601 - Class: 525528000 (USPTO), Dow Chemical Company - Midland, MI, USA
22. Olsson P, Stigh U (1989) On the determination of the constitutive properties of the interphase layers - an exact solution. Int J Fract 41:71-76. doi: 10.1007/BF00018870
23. Salomonsson K, Andersson T (2008) Modeling and parameter calibration of an adhesive layer at the meso level. Mech Mater 40:48-65. doi: 10.1016/ j.mechmat.2007.06.004
24. Salomonsson K, Stigh U (2008) An adhesive interphase element for structural analyses. Int J Numer Methods Eng (To appear). doi: 10.1002/ nme.2333
25. Schmidt P (2007) Computational models of adhesively bonded joints. PhD thesis, Linköping University
26. Sørensen BF (2002) Cohesive law and notch sensitivity of adhesive joints. Acta Mater 50:1053-1061. doi: 10.1016/S1359-6454(01)00404-9
27. Sørensen BF, Jørgensen K, Jacobsen TK, Østergaard RC (2006) DCB-specimen loaded with uneven bending moments. Int J Fract 141:163-176. doi: 10.1007/s10704-006-0071-x
28. Stigh U (1988) Damage and crack growth analysis of the double cantilever beam specimen. Int J Fract 37:R13-R18. doi: 10.1007/BF00017826
29. Stigh U, Andersson T (2000) An experimental method to determine the complete stress-elongation relation for a structural adhesive layer loaded in peel. In: Williams JG, Pavan A (eds) Fracture of polymers, composites and adhesives. ESIS publication 27.. Elsevier, Amsterdam, pp 297-306
30. Suo Z, Bao G, Fan B (1992) Delamination R-curve phenomena due to damage. J Mech Phys Solids 40:1-16. doi: 10.1016/0022-5096(92)90198-B
31. Tamuzs V, Tarasovs S, Vilks U (2003) Delamination properties of translaminar-reinforced composites. Compos Sci Technol 63:1423-1431. doi: 10.1016/S0266-3538(03)00042-3
32. Yang QD, Thouless MD (2001) Mixed-mode fracture analyses of plastically deforming adhesive joints. Int J Fract 110:175-187. doi: 10.1023/ A:1010869706996