Effect of geometric parameters on finite element analysis of bone loading caused by nonpassively fitting implant-supported dental restorations

Quintessence International

Volumn 42, Issue 6, 2011, Pages 471-478

  Winter, Werner ^a   Steinmann, Paul ^a   Holst, Stefan ^a   Karl, Matthias ^a  

^a UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

Author keywords

Bone loading; Finite element analysis; Implant supported restoration; Model geometry; Passive fit; Von Mises equivalent stress

Indexed keywords

TOOTH CEMENT;

ARTICLE; BIOLOGICAL MODEL; BIOMECHANICS; CHEMISTRY; COMPUTER SIMULATION; DENTURE; ENDODONTICS; FINITE ELEMENT ANALYSIS; HUMAN; JAW; MECHANICAL STRESS; PHYSIOLOGY; SURFACE PROPERTY; THREE DIMENSIONAL IMAGING; TOOTH IMPLANTATION; TOOTH PROSTHESIS; YOUNG MODULUS;

ALVEOLAR PROCESS; BIOMECHANICS; COMPUTER SIMULATION; DENTAL ABUTMENTS; DENTAL CEMENTS; DENTAL IMPLANTS; DENTAL MARGINAL ADAPTATION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTURE DESIGN; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; ELASTIC MODULUS; FINITE ELEMENT ANALYSIS; HUMANS; IMAGING, THREE-DIMENSIONAL; MODELS, BIOLOGICAL; STRESS, MECHANICAL; SURFACE PROPERTIES;

EID: 80053079936     PISSN: 00336572     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (35)

1. Al-Sukhun J, Kelleway J, Helenius M. Development of a three-dimensional finite element model of a human mandible containing endosseous dental implants. I. Mathematical validation and experimental verification. J Biomed Mater Res A 2007;80:234-246.
2. Dar FH, Meakin JR, Aspden RM. Statistical methods in finite element analysis. J Biomech 2002;35:1155-1161.
3. Korioth TW, Versluis A. Modeling the mechanical behavior of the jaws and their related structures by finite element (FE) analysis. Crit Rev Oral Biol Med 1997;8:90-104.
4. Sato Y, Wadamoto M, Tsuga K, Teixeira ER. The effectiveness of element downsizing on a three-dimensional finite element model of bone trabeculae in implant biomechanics. J Oral Rehabil 1999;26:288-291.
5. Al-Sukhun J, Lindqvist C, Helenius M. Development of a three-dimensional finite element model of a human mandible containing endosseous dental implants. II. Variables affecting the predictive behavior of a finite element model of a human mandible. J Biomed Mater Res A 2007;80:247-256.
6. Shimizu Y, Usui K, Araki K, Kurosaki N, Takanobu H, Takanashi A. Study of finite element modeling from CT images. Dent Mater J 2005;24:447-455.
7. Liao SH, Tong RF, Dong JX. Influence of anisotropy on peri-implant stress and strain in complete mandible model from CT. Comput Med Imaging Graph 2008;32:53-60.
8. Tajima K, Chen KK, Takahashi N, Noda N, Nagamatsu Y, Kakigawa H. Three-dimensional finite element modeling from CT images of tooth and its validation. Dent Mater J 2009;28:219-226.
9. DeTolla DH, Andreana S, Patra A, Buhite R, Comella B. Role of the finite element model in dental implants. J Oral Implantol 2000;26:77-81.
10. Geng JP, Tan KB, Liu GR. Application of finite element analysis in implant dentistry: A review of the literature. J Prosthet Dent 2001;85:585-598.
11. Quaresma SE, Cury PR, Sendyk WR, Sendyk C. A finite element analysis of two different dental implants: Stress distribution in the prosthesis, abutment, implant, and supporting bone. J Oral Implantol 2008;34:1-6.
12. Tada S, Stegaroiu R, Kitamura E, Miyakawa O, Kusakari H. Influence of implant design and bone quality on stress/strain distribution in bone around implants: A 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2003;18:357-368.
13. Shi L, Li H, Fok AS, Ucer C, Devlin H, Horner K. Shape optimization of dental implants. Int J Oral Maxillofac Implants 2007;22:911-920.
14. van Staden RC, Guan H, Johnson NW, Loo YC, Meredith N. Step-wise analysis of the dental implant insertion process using the finite element technique. Clin Oral Implants Res 2008;19:303-313.
15. Williams KR, Watson CJ, Murphy WM, Scott J, Gregory M, Sinobad D. Finite element analysis of fixed prostheses attached to osseointegrated implants. Quintessence Int 1990;21:563-570.
16. Rubo JH, Souza EA. Finite element analysis of stress in bone adjacent to dental implants. J Oral Implantol 2008;34:248-255.
17. Tsumita M, Kokubo Y, Vult von Steyern P, Fukushima S. Effect of framework shape on the fracture strength of implant-supported all-ceramic fixed partial dentures in the molar region. J Prosthodont 2008;17:274-285.
18. Sevimay M, Turhan F, Kiliçarslan MA, Eskitascioglu G. Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. J Prosthet Dent 2005;93:227-234.
19. Baiamonte T, Abbate MF, Pizzarello F, Lozada J, James R. The experimental verification of the efficacy of finite element modeling to dental implant systems. J Oral Implantol 1996;22:104-110.
20. Huang HL, Chang CH, Hsu JT, Fallgatter AM, Ko CC. Comparison of implant body designs and threaded designs of dental implants: A 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2007;22:551-562.
21. Nagasao T, Kobayashi M, Tsuchiya Y, Kaneko T, Nakajima T. Finite element analysis of the stresses around endosseous implants in various reconstructed mandibular models. J Craniomaxillofac Surg 2002;30:170-177.
22. Chou HY, Jagodnik JJ, Müftü S. Predictions of bone remodeling around dental implant systems. J Biomech 2008;41:1365-1373.
23. Eraslan O, Inan O. The effect of thread design on stress distribution in a solid screw implant:A 3D finite element analysis. Clin Oral Investig 2010;14:411-416.
24. Kunavisarut C, Lang LA, Stoner BR, Felton DA. Finite element analysis on dental implant-supported prostheses without passive fit. J Prosthodont 2002;11:30-40.
25. Natali AN, Pavan PG, Ruggero AL. Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis. Dent Mater 2006;22:388-395.
26. Natali AN, Carniel EL, Pavan PG. Investigation of bone inelastic response in interaction phenomena with dental implants. Dent Mater 2008;24:561-569.
27. Assunção WG, Gomes EA, Barão VA, Delben JA, Tabata LF, de Sousa EA. Effect of superstructure materials and misfit on stress distribution in a single implant-supported prosthesis: A finite element analysis. J Craniofac Surg 2010;21:689-695.
28. Karl M, Wichmann MG, Heckmann SM, Krafft T. Strain development in 3-unit implant-supported CAD/CAM restorations. Int J Oral Maxillofac Implants 2008;23:648-652.
29. Mellal A, Wiskott HW, Botsis J, Scherrer SS, Belser UC. Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. Clin Oral Implants Res 2004;15:239-248.
30. Winter W, Möhrle S, Holst S, Karl M. Bone loading due to different misfit types in implant-supported fixed dental prostheses: A 3D-finite element analysis based on experimental results. Int J Oral Maxillofac Implants (in press).
31. Stolk J, Verdonschot N, Mann KA, Huiskes R. Prevention of mesh-dependent damage growth in finite element simulations of crack formation in acrylic bone cement. J Biomech 2003;36:861-871.
32. Akça K, Eser A, Canay S. Numerical simulation of the effect of time-to-loading on peri-implant bone. Med Eng Phys 2010;32:7-13.
33. Winter W, Möhrle S, Holst S, Karl M. Parameters of implant stability measurements based on resonance frequency and damping capacity: A comparative finite element analysis. Int J Oral Maxillofac Implants 2010;25:532-539.
34. Natali AN, Pavan PG. A comparative analysis based on different strength criteria for evaluation of risk factor for dental implants. Comput Methods Biomech Biomed Engin 2002;5:127-133.
35. Eser A, Akça K, Eckert S, Cehreli MC. Nonlinear finite element analysis versus ex vivo strain gauge measurements on immediately loaded implants. Int J Oral Maxillofac Implants 2009;24:439-446.