Supply chain management for lean project delivery

Construction Supply Chain Management Handbook

Volumn , Issue , 2008, Pages 6-1-6-22

  Tommelein, Iris D ^a   Ballard, Glenn ^a   Kaminsky, Philip ^b  

^a 109 McLaughlin Hall   (United States)

^b DEPARTMENT OF INDUSTRIAL ENGINEERING AND OPERATIONS RESEARCH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 80052233925     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (58)

1. Arbulu, R. J. 2006. Application of pull and CONWIP in construction production Systems. Proc. 14th Ann. Conf. of the Intl. Group for Lean Constr. (IGLC-14), 25-27 July, Santiago, Chile.
2. Arbulu, R. J., Ballard, G., and Harper, N. 2003. Kanban in construction. Proc. 11th Ann. Conf. of the Intl. Group for Lean Constr. (IGLC-11), Elsinore, Denmark.
3. Arbulu, R. J., Tommelein, I. D., Walsh, K. D., and Hershauer, J. C. 2002. Contributors to lead time in construction supply chains: Case of pipe supports used in power plants. Proc. Winter Simulation Conference2002 (WSC02). ExploringNewFrontiers, 8-11 December, San Diego, California, 1745-51.
4. Arbulu, R. J., Tommelein, I. D., Walsh, K. D., and Hershauer, J. C 2003. Value stream analysis of a re-engineered construction supply chain. Building Research and Information—Special Issue on Re-engineering Construction, Spon Press, 31 (2), 161-71.
5. Ballard, G. 1999. Work structuring. Lean Construction Institute White Paper No. 5. www.leanconstruction.org.
6. Ballard, G 2000a. Lean Project Delivery System™. White Paper-8 (Rev. 1). Lean Construction Institute, Ketchum, ID, 23 September. http://www.leanconstruction.org/pdf/WP8-LPDS.pdf, 7 pp.
7. Ballard, G 2000b. The Last Planner™ system of production control. PhD Diss., School of Civil Engineering, The University of Birmingham, UK, 192 pp.
8. Ballard, G. and Howell, G. 1994. Implementing lean construction: Stabilizing work flow. Proc. 2nd Ann. Conf. of the Intl. Group for Lean Constr., reprinted in Alarcon, L. 1997. Lean Construction. A. A. Balkema, Rotterdam, The Netherlands.
9. Ballard, G. and Howell, G 1998. Shielding production: Essential step in production control. Journal of Construction Engineering and Management, ASCE, 124 (1), 11-17.
10. Ballard, G., Tommelein, I., Koskela, L., and Howell, G. 2002. Lean construction tools and techniques. In Best, R. and de Valence, G. (eds) Design and Construction: Building in Value. Oxford, Boston: Butterworth-Heinemann, Elsevier Science, 227-55.
11. Baudin, M. 2004. Lean Logistics: The Nuts and Bolts of Delivering Materials and Goods. Productivity Press, New York, 387 pp.
12. Cox, A. 2001. Managing with power: Strategies for improving value appropriation from supply relationships. The Journal of Supply Chain Management, Spring, 42-47.
13. Davis, S. M. 1989. From “future perfect”: Mass customizing. Planning Review, March/April, 16-21.
14. Fernie, S. and Thorpe, A. 2007. Exploring change in construction: supply chain management. Engineering, Construction and Architectural Management, 14 (4), 319-333.
15. Fine, C. H. and Whitney, D. E. 1996. Is the make-buy decision process a core competence? Working paper. MIT, Sloan School of Management, MIT Center for Technology, Policy, and Industrial Development.
16. Forrester, J. W. 1961. Industrial Dynamics. Cambridge, MA: M.I.T. Press.
17. Gilmore, J. H. and Pine, B. J., II. 1997. The four faces of mass customization. Harvard Business Review, January-February, 91-101.
18. Hamzeh, F., Tommelein, I. D., Ballard, G., and Kaminsky, P. (2007). Logistics centers to support project-based production in the construction industry. In Pasquire, C.L. and Tzortzopoulos, P. (eds) Proceedings of the 15th Annual Conference of the International Group for Lean Construction (IGLC 15), 18-20 July 2007, East Lansing, MI.
19. Harris, R., Harris, C., and Wilson, E. 2003. Making materials flow. Lean Enterprise Institute, Cambridge, MA, 93 pp.
20. Hershauer, J. C., Walsh, K. D., and Tommelein, I. D. 2005. Exploring the multiple perspectives that exist regarding supply chains. In Geunes, J., Akcali, E., Pardalos, P. M., Romeijn, H. E., and Shen, Z. J. (eds) Applications of Supply Chain Management and E-Commerce. New York: Springer. HD38.5A67.
21. Hopp, W. J. and Spearman, M. L. 2000. Factoryphysics. 2nd ed. (1st ed. 1996). McGrawHill, Boston, 698 pp.
22. Howell, G. and Ballard, G. 1999. Design of construction operations. Lean Construction Institute White Paper No. 4. www.leanconstruction.org.
23. Howell, G., Laufer, A., and Ballard, G. 1993. Interaction between subcycles: One key to improved methods. Journal of Construction Engineering and Management, ASCE, 119 (4), 714-28.
24. Kitano, M. 1997. Toyota production system: “One-by-one confirmation”. Lean Manu-facturing Conf., University of Kentucky, May 15. http://www.mfgeng.com/images/toyota.pdf.
25. Koskela, L. 1992. Application of the new production philosophy to the construction industry. Tech. Report No. 72, CIFE, Stanford University, CA, September, 75 pp.
26. Koskela, L 2000. An exploration towards a production theory and its application to construction. PhD Diss., VTT Pub. 408, VTT Building Technology, Espoo, Finland, 296 pp.
27. Koskela, L 2004. Making do: The eighth category ofwaste. Proc. 12th Ann. Conf. of theInt’l. Group for Lean Constr., Elsinore, Denmark.
28. Koskela, L., Howell, G., Ballard, G., and Tommelein, I. 2002. The foundations of lean construction. In Best, R. and de Valence, G. (eds) Design and Construction: Building in Value. Oxford, UK: Butterworth-Heinemann, Elsevier Science, pp. 211-26.
29. Lee, H. L., Padmanabhan, V., and Whang, S. 1997. Information distortion in a supply chain: The bullwhip effect. Management Science, Frontier Research in Manufac-turing and Logistics, 43 (4), 546-58.
30. Liker, J. K. 2003. The Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer. New York: McGraw-Hill, 350 pp.
31. Liker, J. K. and Meier, D. 2005. The Toyota Way Fieldbook. New York: McGraw-Hill, 476 pp.
32. Morgan, J. and Liker, J. 2006. The Toyota Product Development System: IntegratingPeople, Process and Technology. Portland, OR: Productivity Press, 400 pp.
33. Ohno, T. 1988. Toyota Production System: Beyond Large-scale Production. Productivity Press, Portland, OR.
34. Pine, B. J., II. 1993. Mass customizing products and services. Planning Review, July/August, 6-13 and 55.
35. Pine, B. J., II 1999. Mass Customization: The New Frontier in Business Competition. Cambridge, MA: Harvard Business School Press, 368 pp.
36. PMI. 2004. A Guide to the Project Management Body of Knowledge. 3rd ed. Project Management Institute, Newtown Square, PA, 388 pp.
37. Preiss, K. 2006. Agility and leanness. Keynote presentation, International Conference on Agile Manufacturing (ICAM), Old Dominion University, Norfolk, VA.
38. Rother, M. and Harris, R. 2001. Creating Continuous Flow: An Action Guide for Managers. Engineers & Production Associates, Lean Enterprise Institute, Cambridge, MA, 104 pp.
39. Rother, M. and Shook, J. 1999. Learning to see: Value stream mapping to create value and eliminate Muda. v.1.3. The Lean Enterprise Institute, Brookline, MA, 112 pp.
40. Schmenner, R. 1993. Production/Operations Management. 5th ed. Prentice Hall, Englewood, NJ.
41. Simchi-Levi, D., Kaminsky, P., and Simchi-Levi, E. 2007. Designing and Managing the Supply Chain. 3rd ed. New York: McGraw-Hill/Irwin, 498 pp.
42. Smalley, A. 2004. CreatingLevel Pull. Lean Enterprise Institute, Cambridge, MA, 114 pp.
43. Tommelein, I. D. 1998. Pull-driven scheduling for pipe-spool installation: Simulation of lean construction technique. Journal of Construction Engineering and Management, ASCE, 124 (4), 279-88.
44. Tommelein, I D.2006. Process benefits from use of standard products: Simulation experiments using the pipe spool model. Proc. 14th Ann. Conf. of the Intl. Group for Lean Constr (IGLC-14), 25-27 July, Santiago, Chile. http://www.ce.berkeley.edu/%7Etommelein/papers/IGLC06-038-Final-Tommelein.pdf.
45. Tommelein, I. D. and Ballard, G. 1997. Coordinating specialists. Technical Report No. 97-8, Construction Engineering and Management Program, Civil and Envi-ronmental Engineering Department, University of California, Berkeley, CA.
46. Tommelein, I. D. and Li, A. E. Y. 1999. Just-in-time concrete delivery: Mapping alternatives for vertical supply chain integration. Proc. 7th Annual Conference of the International Group for Lean Construction (IGLC-7), 26-28 July, Berkeley, CA, 97-108.
47. Tommelein, I. D., Walsh, K. D., and Hershauer, J. C. 2003. Improving capital projects supply chain performance. Research Report PT172-11, Construction Industry Institute, Austin, TX, 241 pp.
48. Tsao, C. C. Y. 2005. Use of work structuring to increase performance of project-based production systems. Ph.D. Diss., Civil & Envir. Engrg. Dept., Univ. of Calif., Berkeley, CA.
49. Tsao, C. C. Y. and Tommelein, I. D. 2001. Integrated product/process design by a light fixture manufacturer. Proc. 9th Annual Conference of the International Group for Lean Construction (IGLC-9), 6-8 August, Singapore.
50. Tsao, C. C. Y., Tommelein, I. D., and Howell, G. 2000. Case study for work structuring: Installation of metal door frames. Proc. 8th Annual Conference of the International Group for Lean Construction, University of Sussex, Brighton, UK.
51. van Hoek, R. I. 2000. The thesis of leagility revisited. International Journal of Agile Management Systems, 2/3, 196-201.
52. van Hoek, R. I. 2001. The rediscovery of postponement: A literature review and directions for research. Journal of Operations Management, 19, 161-84.
53. Ward, A., Christiano, J., Sobek, D., and Liker, J. 1998. Toyota, concurrent engineering, and set-based design. In: Liker, J. K., Ettlie, J. E., and Campbell, J. C. (eds) Engi-neered in Japan: Organization and Technology. New York: Oxford University Press.
54. Womack, J. P. and Jones, D. T. 1996. Lean Thinking: Banish Waste and Create Wealth in Your Corporation. New York: Simon & Schuster, 352 pp.
55. Womack, J. P. and Jones, D. T 2002. Seeing the whole: Mapping the extended value stream. Lean Enterprise Institute, Cambridge, MA, 101 pp.
56. Womack, J. P., Jones, D. T., and Roos, D. 1990. The Machine That Changed the World. HarperCollins Publishers, New York, NY, 323 pp.
57. Wortmann, J. C., Muntslag, D. R., and Timmermans, P. J. M. (eds). 1997. Customer-driven Manufacturing London, UK: Chapman & Hall, 464 pp.
58. Zabelle, T. R. and Fischer, M. A. 1999. Delivering value through the use of three dimen-sional computer modeling. Proc. 2nd Conference on Concurrent Engineering in Construction, Espoo, Finland.