Influence of slip system hardening assumptions on modeling stress dependence of work hardening

Journal of the Mechanics and Physics of Solids

Volumn 45, Issue 11-12, 1997, Pages 1781-1804

  Miller, Matthew ^a   Dawson, Paul ^a  

^a Cornell University   (United States)

Author keywords

A. microstructures; A. strengthening methods; B. constitutive behavior; B. crystal plasticity; B. polycrystalline metal

Indexed keywords

CRYSTAL MICROSTRUCTURE; DEFORMATION; ELASTICITY; MATHEMATICAL MODELS; PLASTICITY; POLYCRYSTALLINE MATERIALS; SENSITIVITY ANALYSIS; SHEAR STRESS; STRENGTHENING (METAL); STRESS CONCENTRATION; TENSORS; THERMAL EFFECTS;

AGGREGATE AVERAGED HARDENING EQUATION; SLIP SYSTEM HARDENING; TAYLOR FACTOR;

STRAIN HARDENING;

EID: 0031274284     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-5096(97)00029-X     Document Type: Article

References (47)

1. Asaro, R. J. (1983) Crystal plasticity. ASME J. Appl. Mech. 50, 921-934.
2. Asaro, R. J. and Needleman, A. (1985) Texture development and strain hardening in rate dependent polycrystals. Acta Metall. 33, 923-953.
3. Bassani, J. L. (1994) Plastic flow in crystals. Adv. Appl. Mech. 30, 191-258.
4. Bassani, J. L. and Wu, T-Y. (1991) Latent hardening in single crystals - II. Analytical characterization and predictions. Proc. Royal Soc. London A 435, 21-41.
5. Beaudoin, A. J., Mecking, H. and Kocks, U. F. (1995a) Development of local shear bands and orientation gradients. Simulation of Materials Processing: Theory, Methods, and Applications, ed. Shen and P. R. Dawson, pp. 225-230. Balkema, Rotterdam.
6. Beaudoin, A. J., Dawson, P. R., Mathur, K. K. and Kocks, U. F. (1995b) A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking. Int. J. Plasticity 11, 501-521.
7. Becker, S. and Panchanadeeswaran, S. (1989) Crystal rotations as Rodriguez vectors. Text. Microstruct. 10, 167-194.
8. Bishop, J. F. W. and Hill, R. (1951a) A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Phil. Mag. ser. 7 42, 414-427.
9. Bishop, J. F. W. and Hill, R. (1951b) A theoretical derivation of the plastic properties of a polycrystalline face-centred metal. Phil. Mag. ser. 7 42, 1298-1307.
10. Butler, G. C. (1996) Personal communication. Georgia Institute of Technology.
11. Chin, G. Y. and Mammel, W. L. (1967) Computer solutions of the Taylor analysis for axisymmetric flow. Trans. Metall. Soc. AIME 239, 1400-1405.
12. Dawson, P. R., Beaudoin, A. J. and Mathur, K. K. (1994) Finite element modeling of polycrystalline solids. Numerical Predictions of Deformation Processes and the Behaviour of Real Materials, ed. Anderson et al., pp. 33-43. Riso National Laboratory, Roskilde, Denmark.
13. Frank, F. C. (1988) Orientation mapping. Eighth International Conference on Textures of Materials, ed. J. S. Kallend and G. Gottstein, pp. 3-13. The Metallurgical Society, Warrendale, PA.
14. Graham, S. (1995) The stress state dependence of finite inelastic deformation behavior of fcc polycrystalline materials. M.S. thesis, Georgia Institute of Technology, Atlanta, GA.
15. Harren, S. V. and Asaro, R. J. (1989) Nonuniform deformations in polycrystals and aspects of the validity of the Taylor theory. J. Mech. Phys. Solids 37, 191-232.
16. Havliček, F., Tokuda, M., Hino, S. and Kratochvil, J. (1992) Finite element method analysis of micro-macro transition in polycrystalline plasticity. Int. J. Plasticity 8, 477-499.
17. Havner, K. S. (1992) Finite Deformation of Crystalline Solids. Cambridge University Press, Cambridge.
18. Hill, R. and Rice, J. R. (1972) Constitutive analysis of elastic plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20, 401-413.
19. Hughes, D. A. and Nix, W. D. (1989) Strain hardening and substructural evolution in Ni-Co solutions at large strains. Mater. Sci. Eng. A122, 153-172.
20. Hutchinson, J. W. (1976) Bounds and self-consistent estimates for creep of polycrystalline materials. Proc. Royal Soc. London A A348, 101-127.
21. Iwakuma, T. and Nemat-Nasser, S. (1984) Finite elastic-plastic deformation of polycrystalline metals. Proc. Royal Soc. London A A394, 87-119.
22. Jackson, P. J. and Basinski, Z. S. (1967) Latent hardening and the flow stress in copper single crystals. Can. J. Physics 45, 247-272.
23. Khan, A. S. and Cheng, P. (1996) An anisotropic elastic-plastic constitutive model for single and polycrystalline metals - I. Theoretical developments. Int. J. Plasticity 12, 147-162.
24. Kocks, U. F. (1964) Latent hardening and secondary slip in aluminum and silver. Trans. Metall. Soc. AIME 230, 1160-1167.
25. Kocks, U. F. (1976) Laws for work-hardening and low-temperature creep. J. Eng. Mater. Technol. 98, 76-85.
26. Kocks, U. F. (1987) Constitutive behavior based on crystal plasticity. Unified Constitutive Equations for Plastic Deformation and Creep of Engineering Alloys, ed. A. K. Miller, pp. 1-88. Elsevier Applied Science.
27. Kocks, U. F. and Brown, T. J. (1966) Latent hardening in aluminum. Acta Metall. 14, 87-98.
28. Kocks, U. F., Stout, M. G. and Rollett, A. D. (1988) The influence of texture on strain hardening. Strength of Metals and Alloys ICSM A 8, ed. Kettunen et al., pp. 25-34. Pergamon, Oxford.
29. Kumar, A. (1996) Polycrystal modeling with finite elements over orientation space. Ph.D. dissertation, Cornell University.
30. Lebensohn, R. A. and Tome, C. N. (1994) A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals. Mater. Sci. and Eng. A175, 71-82.
31. Lin, G. and Havner, K. S. (1994) On the evolution of texture and yield loci in axisymmetric deformation of fcc polycrystals. Int. J. Plasticity 10, 471-498.
32. Lipinski, P. and Berveiller, M. (1989) Elastoplasticity of micro-inhomogeneous metals at large strain. Int. J. Plasticity 5, 149-172.
33. Mathur, K. K. and Dawson, P. R. (1989) On modeling the development of crystallographic texture in bulk forming processes. Int. J. Plasticity 5, 67-94.
34. Mathur, K. K., Dawson, P. R. and Kocks, U. F. (1990) On modeling anisotropy in deformation processes involving polycrystals with distorted grain shapes. Mech. Mater. 10, 183-202.
35. McHugh, P. E., Varias, A. G., Asaro, R. J. and Shih, C. F. (1989) Computational modeling of microstructures. Future Gen. comp. Sys. 5, 295-318.
36. Mecking, H., Kocks, U. F. and Hartig, Ch. (1996) Taylor factors in materials with many deformation modes. Scr. Metall. 35, 465-471.
37. Miller, M. P. (1993) Improved constitutive laws for finite strain inelastic deformation Ph.D. dissertation, The George Woodruff School of Mechanical Engineering, Georgia Institute of Technology.
38. Miller, M. P. and McDowell, D. L. (1996) The effect of stress-state on the large stain inelastic deformation behavior of 304L stainless steel. J. Eng. Mater. Technol. 118, 28-36.
39. Miller, M. P., Bammann, D. J. and Dawson, P. R. (1995) Reflecting microstructural evolution in hardening models for polycrystalline metals. Simulation of Materials Processing: Theory, Methods and Applications, ed. Shen and P. R. Dawson, pp. 295-300.
40. Molinari, A., Canova, G. R. and Ahzi, A. (1989) A self-consistent approach of the large deformation polycrystal plasticity. Acta Metall. 35, 2983-2994.
41. Ramaswami, B., Kocks, U. F. and Chalmers, B. (1965) Latent hardening in silver and an Ag-Au alloy. Trans. Metall. Soc. AIME 233, 927-931.
42. Sachs, G. (1928) Zur Ableitung einer Fliessbedingung. A. Ver. dt. Ing. 12, 134-136.
43. Stout, M. S., Follansbee, P. S. and Lovato, M. L. (1987) An evaluation of Incremental testing to large strain in OFE copper. Mech. Mater. 6, 1-10.
44. Taylor, G. I. (1938) Plastic strain in metals. J. Inst. Met. 62, 307-324.
45. Taylor, G. I. and Elam, C. F. (1923) The distortion of an aluminum crystal during a tensile test. Proc. Royal Soc. London A A102, 643-667.
46. Voce, E. (1948) A practical strain-hardening function. Acta Metall. 51, 219-226.
47. Wu, T-Y., Bassani, J. L. and Laird, C. (1991) Latent hardening in single crystals - I. Theory and experiments. Proc. Royal Soc. London 435, 1-19.