Conceptual model for assessment of inhalation exposure to manufactured nanoparticles

Journal of Exposure Science and Environmental Epidemiology

Volumn 21, Issue 5, 2011, Pages 450-463

  Schneider, Thomas ^a,b   Brouwer, Derk Henri ^c   Koponen, Ismo Kalevi ^b   Jensen, Keld Alstrup ^b   Fransman, Wouter ^c   Van Duuren Stuurman, Birgit ^c   Van Tongeren, Martie ^d   Tielemans, Erik ^c  

^a NFA National Research Centre for the Working Environment ^*  (Denmark)

^b NATIONAL RESEARCH CENTRE FOR THE WORKING ENVIRONMENT   (Denmark)

^c TNO   (Netherlands)

^d INSTITUTE OF OCCUPATIONAL MEDICINE   (United Kingdom)

Author keywords

coagulation; exposure modeling; modifying factors; nanoparticles; source receptor

Indexed keywords

EID: 80052071019     PISSN: 15590631     EISSN: 1559064X     Source Type: Journal    
DOI: 10.1038/jes.2011.4     Document Type: Article

References (65)

1. Aitchison J., and Brown J.A.C. The Log-Normal Distribution. Cambridge University Press, Cambridge, UK, 1969.
2. Ayer H.E., and Yeager D.W. Irritants in cigarette smoke plumes. Am J Pub Health 1982: 72: 1283-1285.
3. Bello D., Wardle B., Yamamoto N., Guzman deVilloria R., Garcia E., Hart A., Ahn K., Ellenbecker M., and Hallock M. Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubes. J Nanopart Res 2009: 11: 231-249.
4. Brouwer D. Exposure to manufactured nanoparticles in different workplaces. Toxicol 2010: 269: 120-127.
5. Brouwer D.H., van Duuren-Stuurman B, BergesM., Jankowska E., Bard D., and Mark D. From workplace air measurement results towards estimates of exposure?: Development of a strategy to assess exposure to manufactured nanoobjects. J Nanopart Res 2009: 11: 1867-1881.
6. Chen F., and Lai A.C.K. An Eulerian model for particle deposition under electrostatic and turbulent conditions. J Aerosol Sci 2004: 35: 47-62. (Pubitemid 37476254)
7. DeCarlo P., Slowik J., Worsnop D., Davidovits P., and Jimenez J. Particle morphology and density characterization by combined mobility and aerodynamic diameter measurements. Part 1: Theory. Aerosol Sci Technol 2004: 38: 1185-1205. (Pubitemid 40075872)
8. Demou E., Peter P., and Hellweg S. Exposure to manufactured nanostructured particles in an industrial pilot plant. Ann Occup Hyg 2008: 52: 695-706.
9. Demou E., Stark W.J., and Hellweg S. Particle emission and exposure during nanoparticle synthesis in research laboratories. Ann Occup Hyg 2009: 53: 829-838.
10. Fransman W, Cherrie J, van Tongeren M, Schneider T, Tischler M, and Schinkel J, et al. Development of a Mechanistic Model for the Advanced REACH Tool (ART), Beta release. TNO report V 8667, Zeist, The Netherlands, 2009, pp 34-45. available from www.advancedreachtool.com.
11. Fransman W., Schinkel J., Meijster T., van Hemmen J., Tielemans E., and Goede H. Development and evaluation of an exposure control efficacy Library (ECEL). Ann Occup Hyg 2008: 52(7): 567-575.
12. Fujitani Y., Kobayashi T., Arashidani K., Kunugita N., and Suemura K. Measurement of the physical properties of aerosols in a fullerene factory for inhalation exposure assessment. J Occup Environ Hyg 2008: 5: 380-389.
13. Golanski L., Guiot A., Rouillon F., Pocachard J., and Tardif F. Experimental evaluation of personal protection devices against graphite nanoaerosols: Fibre filter media, masks, protective clothing and gloves. Human Experim Toxicol 2009: 28: 353-353.
14. Gong L., Xu B., and Zhu Y. Ultrafine particles deposition inside passenger vehicles. Aerosol Sci Technol 2009: 43: 544-553.
15. Hagendorfer H., Lorenz C., and Kaegi R., et al. Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles. J Nanopart Res 2010: 12: 2481-2494.
16. He C.,Morawska L., and Gilbert D. Particle deposition rates in residential houses. Atmos Environm 2005: 39: 3891-3899. (Pubitemid 40854283)
17. Health and Safety Executive. Controlling Airborne Contaminants at Work. A guide to local exhaust ventilation (LEV). Health and Safety Executive, UK, 2008 ISBN 9780717662982.
18. Hinds W.C. Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles, 2nd ed. Wiley-Interscience, New York, USA, 1999.
19. International Organization for Standardization. Health and Safety Practices in Occupational Settings Relevant to Nanotechnologies. ISO TR 12885, Geneva, Switzerland, 2008a.
20. International Organization for Standardization. Nanotechnologies- Terminology and Definitions for Nano-objects-Nanoparticle, Nanofibre and Nanoplate. ISO TS 27687 Geneva, Switzerland, 2008b.
21. International Standardisation Organiation. Workpklace Atmospheres-Ultrafine, Nanoparticle and Nano-structured Aerosols-Inhalation Exposure Characterization and Assessment. ISO/TR 27628, Geneva, Switzerland, 2007.
22. Jacobson M.Z., and Seinfeld J.H. Evolution of nanoparticle size and mixing state near the point of emission. Atmos Environ 2004: 38: 1839-1850. (Pubitemid 38402024)
23. Kim D.S., Hong S.B., Kim Y.J., and Lee K.W. Deposition and coagulation of polydisperse nanoparticles by Brownian motion and turbulence. J Aerosol Sci 2006: 37: 1781-1787. (Pubitemid 44708151)
24. Koch W Das dynamische verhalten von ultrafeinen aerosolen. In: BIA-Report 7/2003. BIA-Workshop "Ultrafeine Aerosole and Arbeitsplätzen" 2002. Downloaded 2009-07-09 from http://www.dguv.de/bgia/de/pub/rep/rep04/ biar0703/index.jsp.
25. Koponen I.K., Jensen K.A., and Schneider T. Sanding dust from nanoparticlecontaining paints: Physical characterization. J Phys: Conference Series 2009: 151: 1-9.
26. Korhonen H., Lehtinen K.E.J., and Kulmala M. Multicomponent aerosol dynamics model UHMA: Model development and validation. Atmos Chem Phys 2004: 4: 757-771. (Pubitemid 39000914)
27. Kousaka Y., Okuyama K., and Endo Y. Re-entrainment of small aggregate particles from a plane surface by air stream. J Chem Engi Japan 1980: 13: 143-147. (Pubitemid 10486557)
28. Kuhlbusch T.A., and Fissan H. Particle characteristics in the reactor and pelletizing areas of carbon black production. J Occup Environ Hyg 2006: 3: 558-567. (Pubitemid 44266958)
29. Kuhlbusch T.A.J., Neumann S., and Fissan H. Number size distribution, mass concentration, and particle composition of PM1, PM2.5, and PM10 in bag filling areas of carbon black production. J Occup Environl Hyg 2004: 1: 660-671. (Pubitemid 39387568)
30. Lai A.C. Particle deposition indoors: A review. Indoor Air 2002: 12: 211-214. (Pubitemid 135747820)
31. Lai A.C.K., and Chen F. Modeling particle deposition and distribution in a chamber with a two-equation Reynolds-averaged Navier-Stokes model. J Aerosol Sci 2006: 37: 1770-1780. (Pubitemid 44708152)
32. Luther W Industrial Applications of Nanomaterials-Chances and Risks. Future Technol No. 54, VDI Technologiezentrum GmbH, Düsseldorf, Germany, 2004.
33. Ma-Hock L., Gamer A.O., Landsiedel R., Leibold E., Frechen T., Sens B., Linsenbuehler M., and van Ravenzwaay B. Generation and characterization of test atmospheres with nanomaterials. Inhal Toxicol 2007: 19: 833-848. (Pubitemid 47237751)
34. Marquart H., Heussen H., and le Feber M. Stoffenmanger: A web-based control banding tool using an exposure process model. Ann Occup Hyg 2008: 52: 429-441.
35. Maynard A., and Aitken R. Assessing exposure to airborne nanomaterials; current abilities and future requirements. Nanotoxicol 2007: 1: 26-41. (Pubitemid 46570248)
36. Maynard A.D., Baron P.A., Foley M., Shvedova A.A., Kisin E.R., and Castranova V. Exposure to carbon nanotube material: Aerosol release during the handling of unrefined single-walled carbon nanotube material. J Toxicol Environ Health Part A 2004: 67: 87-107. (Pubitemid 38117533)
37. McMurry P.H., and Rader D.J. Aerosol wall losses in electrically charged chambers. Aerosol Sci and Technol 1985: 4: 249-268. (Pubitemid 15561853)
38. Methner M., Hodson L., Dames A., and Geraci C. Nanoparticle emission assessment technique (NEAT) for the identification and measurement of potential inhalation exposure to engineered nanomaterials Part A. J Occup Environ Hyg 2010: 7: 127-132.
39. Nørgaard A.W., Jensen K.A., Janfeldt C., Lauritsen F.R., Clause P.A., and Wolkoff P. Release of VOCs and particles during use of nanofilm spray products. Environ Sci Technol 2009: 43(20): 7824-7830.
40. Occupational Safety & Health Agency. Assigned Protection Factors: Final Rule, Fed Regist 71:50121-50192. 2006: Http://www.osha.gov/pls/oshaweb/ owadisp.show-document?p-table=FEDERAL-REGISTER&p-id=18846.
41. Old L., and Methner M. Effectiveness of local exhaust ventilation (LEV) in controlling engineered nanomaterial emissions during reactor cleanout operations. J Occup Environ Hyg 2008: 5: D63-D69.
42. Park J.P., Kwak B.K., Bae E., Lee J., Kim Y., Choi K., and Yi J. Characterization of exposure to silver nanoparticles in a manufacturing facility. J Nanopart Res 2009: 11: 1705-1712.
43. Peters T.M., Elzey S., Johnson R., Park H., Grassian V.H., Maher T., and O'Shaughnessy P. Airborne monitoring to distinguish engineered nanomaterials from incidental particles for environmental health and safety. J Occup Environ Hyg 2009: 6: 73-81.
44. Pui DY.H., Qi C., Stanley N., Oberdörster G., and Maynard A. Recirculating air filtration significantly reduces exposure to airborne nanoparticles. Environ Health Perspect 2008: 116: 863-866. (Pubitemid 351943891)
45. Qian J., and Ferro A.R. Resuspension of dust particles in a chamber and associated environmental factors. Aerosol Sci Technol 2008: 42: 566-578. (Pubitemid 351919841)
46. Raabe O.G. The dilution of monodisperse suspensions for aerosolization. Am Ind Hyg Assoc J 1968: 29: 439-443.
47. Schneider T., and Jensen K.A. Combined single-drop and rotating drum dustiness test of fine to nanosize powders using a small drum. Ann Occup Hyg 2008: 52: 23-34.
48. Schneider T., and Jensen K.A. Relevance of aerosol dynamics and dustiness for personal exposure to manufactured nanoparticles. J Nanopart Res 2009: 11: 1637-1650.
49. Schulte P., Geraci C., Zumwalde R., Hoover M., and Kuempel E. Occupational risk management of engineered nanoparticles. J Occupl Environ Hyg 2008: 5: 239-249.
50. Seaton A., Tran L., Aitken R., and Donaldson K. Nanoparticles, human health hazard and regulation. J R Soc Interface 2010: 7(Suppl 1): S119-S129.
51. Seipenbusch M, Binder A, and Kasper G Temporal evolution of nanoparticle aerosols in workplace exposure. Ann Occup Hyg 2008: 52: 707-716.
52. Shaffer R.E., and Rengasamy S. Respiratory protection against airborne nanoparticles: A review. J Nanopart Res 2009: 11: 1661-1672.
53. Tielemans E., Schneider T., Goede H., TischerM.,Warren N., and Kromhout H., et al. Conceptual model for assessment of inhalation exposure: Defining modifying factors. Ann Occup Hyg 2008: 52: 577-586.
54. Tielemans E., Warren N., Schneider T., Tischer M., Ritchie P., Goede H., Kromhout H., van Hemmen J., and Cherrie J.W. Tools for regulatory assessment of occupational exposure: Development and challenges. J Expos Sci Environ Epidemiol 2007: 17: S72-S80. (Pubitemid 350242473)
55. Tsai C.-J., Pui D.Y.H., and Liu B.Y.H. Elastic flattening and particle adhesion. Aerosol Sci Tech 1991: 15: 239-255.
56. Tsai S.-J., Ada EIsaacs J.A., and Ellenbecker M.J. Airborne nanoparticle exposures associated with the manual handling of nanoalumina and nanosilver in fume hoods. J Nanopart Res 2008a: 11: 147-161.
57. Tsai S.-J., Ashter A., Ada E., Mead J.L., Barry C.F., and EllenbeckerM.J. Airborne nanoparticles release associated with the compounding of nanocomposites using Nanoalumina as fillers. Aerosol Air Quality Res 2008b: 8: 160-177.
58. Tsai S.-J., Hofmann M., Hallock M., Ada E., Kong J., and Ellenbecker M. Characterization and evaluation of nanoparticle release during the synthesis of single-walled and multiwalled carbon nanotubes by chemical vapor deposition. Environ Sci Technol 2009: 43: 6017-6023.
59. Van Duuren-Stuurman B. Exploration of the Likelihood of Dermal Exposure to Manufactured Nano Materials; Results from the NANOSH Project. OESSC, Edinburgh, (abstract 20-3) 2009.
60. Vorbau M., Hillemann L., and Stintz M. Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings. J Aerosol Sci 2009: 40: 209-217.
61. Whitby K.T. Determination of aerosol growth rates in the atmosphere using lumped mode aerosol dynamics. J Aerosol Sci 1981: 12: 173-178.
62. Yeganeh B., Kull C.M., Hull M.S., and Marr L.C. Characterization of airborne particles during production of carbonaceous nanomaterials. Environ Sci Tech 2008: 42: 4600-4606. (Pubitemid 351842412)
63. Zaghbani I., Songmene V., and Khettabi R. Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy. J Mat Engin Perform 2009: 18: 38-48.
64. Zalk D.M., Paik S.Y., and Swuste P. Evaluating the control banding nanotool: A qualitative risk assessment method for controlling nanoparticle exposures. J Nanopart Res 2009: 11: 1685-1704.
65. Zebel G. Coagulation of aerosols. In: Davies C.N. (ed). Aerosol Science. Academic Press, London and New York, 1966.