Self-assembled scaffolds using reactiondiffusion systems: A hypothesis for bone regeneration

Journal of Mechanics in Medicine and Biology

Volumn 11, Issue 1, 2011, Pages 231-272

  Garzón Alvarado, Diego A ^a   Velasco, Marco A ^b   Narváez Tovar, Carlos A ^a,b  

^a UNIVERSIDAD NACIONAL DE COLOMBIA   (Colombia)

^b UNIVERSIDAD SANTO TOMÁS   (Colombia)

Author keywords

bone; reaction diffusion system; Scaffold

Indexed keywords

EID: 79956154289     PISSN: 02195194     EISSN: None     Source Type: Journal    
DOI: 10.1142/S021951941100396X     Document Type: Article

References (77)

1. Hollinger J, Einhorn TA, Doll B, Sfeir C, Bone Tissue Engineering, CRC Press, 2004.
2. Cowin S, Bone Mechanics Handbook, CRC Press, 2001.
3. Pettway G, Schneider A, Koh A, Widjaja E, Morris M, Meganck J, Goldstein S, McCauley L, Anabolic actions of PTH: use of a novel tissue engineering model to investigate temporal effects on bone, Bone 36:959-970, 2005. (Pubitemid 40797996)
4. Mckenna M, Frame B, Hormonal influences on osteoporosis, Am J Med 82:61-67, 1987.
5. Heaney R, Nutrition and Risk for Osteoporosis, in Marcus R, Feldman D, Kelsey J, Osteoporosis, Academic Press, 2001.
6. Domingues Z, Cortés M, Gomes T, Diniz H, Freitas C, Gomes J, Faria A, Sinisterra R, Bioactive glass as a drug delivery system of tetracycline and tetracycline associated with β-cyclodextrin, Biomaterials 25:327-333, 2004. (Pubitemid 37329722)
7. Fuchs B, Ossendorf C, Leerapun T, Sim F, Intercalary segmental reconstruction after bone tumor resection, Eur J Surgical Oncol 34:1271-1276, 2008.
8. Lanza R, Langer R, Vacanti J, Principles of Tissue Engineering, Elsevier Academic Press, 2007.
9. Kalorama, Implant-based dental reconstruction: The worldwide implant and bone graft market, Market Research Group, 2005.
10. Rekow D, Van Thompson P, Ricci J, Influence of scaffold meso-scale features on bone tissue response, J Mater Sci 41:5113-5121, 2006. (Pubitemid 44326807)
11. Sengers B, Taylor M, Please C, Oreffo R, Computational modelling of cell spreading and tissue regeneration in porous scaffolds, Biomaterials 28:1926-1940, 2007. (Pubitemid 46123545)
12. Adachi T, Osako Y, Tanaka M, Hojo M, Hollister S, Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration, Biomaterials 27:3964-3972, 2006.
13. Goh J, Shao X, Hutmacher D, Lee E, Tissue engineering approach to osteochondral repair and regeneration, J M ech Med B i ol 4:463-483, 2004.
14. Petrasch J, Meier F, Friess H, Steinfeld A, Tomography based determination of permeability, Dupuit-Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramics, Int J Heat Fluid Flow 29:315-326, 2008.
15. Vergis E, Ayala D, Grau S, Tost D, 3D reconstruction and quantification of porous structures, Comp Graphics 32:438-444, 2008.
16. De Amorim H, Da Silva B, Virtual topological optimisation of scaffolds for rapid prototyping, Med Eng Phys 32:775-782, 2010.
17. Rajagopalan S, Robb RA, Schwarz meets Schwann: design and fabrication of biomor-phic and durataxic tissue engineering scaffolds, Med Image Analysis 10:693-712, 2006. (Pubitemid 44375495)
18. Okabe A, Boots B, Sugihara K, Chiu SN, Spatial Tessellations - Concepts and Applications of Voronoi Diagrams, John Wiley, 2000.
19. Kou XY, Tan ST, A simple and effective geometric representation for irregular porous structure modeling, Comp Aided Design, In Press, Accepted Manuscript, 2010.
20. Leppanen T, Karttunen M, Kaski K, Barrio R, Zhang L, A new dimension to Turing patterns, Physica D 168:35-44, 2002. (Pubitemid 34802464)
21. Shoji H, Yamada K, Ueyama D, Ohta T, Turing patterns in three dimensions, Phys Rev E 75:046212, 2007.
22. Grzybowski BA, Bishop KJM, Campbell CJ, Fialkowski M, Smoukov SK, Micro- and nanotechnology via reaction-diffusion, Soft Matter 1:114-128, 2005. (Pubitemid 41420017)
23. Turing A, The chemical basis of morphogenesis, Philosoph Trans R Soc B Biol Sci 327:37-72, 1952.
24. Zaikin A, Zhabotinsky A, Concentration wave propagation in 2-dimensional liquid-phase self-oscillating system, Nature 225:535-537, 1970.
25. Turk G, Generating textures on arbitrary surfaces using reaction-diffusion, Comp Graphics 25:289-298, 1991.
26. Kondo S, The reaction-diffusion system: a mechanism for autonomous pattern formation in the animal skin, Genes Cells 7:535-541, 2002. (Pubitemid 34679051)
27. Volpert V, Petrovskii S, Reaction-diffusion waves in biology, Phys Life Rev 6:267-310, 2009.
28. Nagorcka B, Evidence for a reaction-diffusion system as a mechanism controlling mammalian hair growth, Biosystems 16:323-332, 1983. (Pubitemid 14125489)
29. Rajagopalana G, Immordino K, Gillespie J, McKnight S, Diffusion and reaction of epoxy and amine in polysulfone studied using Fourier transform infrared spectroscopy experimental results, Polymer 41:2591-2602, 2000. (Pubitemid 30048006)
30. Murray J, Mathematical Biology, Volume I, Springer, 2001.
31. Meinhardt A, Models of Biological Pattern Formation, Academic Press, 1982.
32. Garźon-Alvarado D, Garcia-Aznar J, Doblaré M, Appearance and location of secondary ossification centres maybe explained by a reaction-diffusion mechanism, Comp Biol Med 39:554-561, 2009.
33. Tabor Z, Rokita E, Cichocki T, Origin of the pattern of trabecular bone: an experiment and a model, Phys Rev E Stat Nonlinear Soft Matter 66:05196, 2002.
34. Tezuka K, Wada Y, Takahashi A, Kikuchi M, Computer-simulated bone architecture in a simple bone-remodeling model based on a reaction-diffusion system, J Bone Mineral Metab 23:1-7, 2005.
35. Courtin B, Perault-Staub A, Staub J, Spatio-temporal self-organization of bone mineral metabolism and trabecular structure of primary bone, Acta Biotheor 43:373-386, 1995.
36. Chaturvedi R, Huang C, Kazmierczak B, Schneider T, Izaguirre J, Newman S, Glazier J, Alber M, On multiscale approaches to 3-dimensional modeling of morphogenesis, J R Soc Interface 2:237-253, 2005.
37. Callahan T, Knobloch E, Pattern formation in three-dimensional reaction-diffusion systems, Physica D 132:339-362, 1999. (Pubitemid 129591215)
38. Shoji H, Yamada K, Most stable patterns among three-dimensional turing patterns, Jpn J Indus Appl Math 24:67-77, 2007.
39. Maselko J, Self-organization as a new method for synthesizing smart and structured materials, Mater Sci Eng 4:199-204, 1996. (Pubitemid 126384053)
40. Suetsugu Y, Walsh D, Tanaka J, Mann S, Hydroxyapatite pattern formation in PVA gels, J Mater Sci 44:5806-5814, 2009.
41. Furuichi F, Oaki Y, Ichimiya H, Komotory J, Imai H, Preparation of hierarchically organized calcium phosphate-organic polymer composites by calcification of hydrogel, Sci Technol Adv Mater 7:219-225, 2006.
42. Grzybowski B, Chemistry in Motion: Reaction-Diffusion Systems for Micro- and Nan-otechnology, Wiley, 2009.
43. Cui F, Li Y, Ge J, Self-assembly of mineralized collagen composites, Mater Sci Eng R Reports 57:1-27, 2007. (Pubitemid 47044908)
44. Li Q, Zheng C, Wang N, Spiral waves in LIMA model and its LBGK simulation, Commun Nonlinear Sci Numer Simulation 6:68-73, 2001.
45. Ristori S, Rossi F, Biosa G, Marchettini N, Rustici M, Tiezzi E, Interplay between the Belousov-Zhabotinsky reaction-diffusion system and biomimetic matrices, Chem Phys Lett 436:175-178, 2007. (Pubitemid 46216991)
46. Page K, Maini P, Monk N, Complex pattern formation in reaction-diffusion systems with spatially varying parameters, Physica D 202:95-115, 2005. (Pubitemid 40371044)
47. Madzvamuse A, A numerical approach to the study of spatial pattern formation, Ph.D. Thesis, Oxford University (2000).
48. Moreno-Atanasio R, Williams R, Jia X, Combining X-ray microtomography with computer simulation for analysis of granular and porous materials, Particuology 8:81-99, 2010.
49. Perilli E, Baleani M, Raatjes W, Baruffaldi F, Cappello A, Toni A, Compressive properties of trabecular bone related to microCT evaluated morphometric parameters: preliminary results, J Mech Med Bi ol 5:349-355, 2005.
50. Boccaccio A, Lamberti L, Pappalettere C, Quagliarella L, Accuracy of finite element predictions on bone/implant interface contact pressures for models reconstructed from CT scans, J Mech Med Biol 8:161-182, 2008.
51. Singh R, Lee P, Lindley T, Kohlhauser C, Hellmich C, Bram C, Imwinkelried T, Dashwood RJ, Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling, Acta Biomater 6:2342-2351, 2010.
52. Maini P, Othmer H, Mathematical Models in Morphogenesis, Springer, 1999.
53. Kapral R, Pattern formation in chemical systems, Physica D 86:149-157, 1995.
54. Zienkiewicz O, Taylor R, The Finite Element Method: Solid Mechanics, Volume II, Butterworth-Heinemann, 2000.
55. Javierre E, Moreo P, Doblaré M, Garcia-Aznar J, Numerical modeling of a mechano-chemical theory for wound contraction analysis, Int J solids Struct 46:3597-3606, 2009.
56. Kasios Duowedge, Manufacturer catalog, available in www.kasios.com (2008).
57. Roussel C, Roussel M, Reaction-diffusion models of development with state-dependent chemical diffusion coefficients, Prog Biophys Mol Biol 86:113-160, 2004. (Pubitemid 38946556)
58. Ma P, Elisseeff J, Scaffolding in Tissue Engineering, CRC Press, 2006.
59. Yang S, Leong K, Du Z, Chua C, The design of scaffolds for use in tissue engineering, Part 1. Traditional factors, Tissue Eng 7:679-689, 2001. (Pubitemid 34042301)
60. Yang S, Leong K, Du Z, Chua C, The design of scaffolds for use in tissue engineering, Part 2. Rapid prototyping techniques, Tissue Eng 8:1-11, 2002. (Pubitemid 34194659)
61. Bartolo P, Chua C, Almeida H, Chou S, Lim A, Biomanufacturing for tissue engineering: Present and future trends, Virtual Phys Prototyping 4:203-216, 2009.
62. Too M, Leong K, Chua C, Du Z, Yang S, Cheah C, Ho S, Investigation of 3D non-random porous structures by fused deposition modeling, Int J Adv Manufact Technol 19:217-223, 2002. (Pubitemid 34268719)
63. Zein I, Hutmacher D, Tan K, Teoh S, Fused deposition modeling of novel scaffold architectures for tissue engineering applications, Biomaterials 23:1169-1185, 2002. (Pubitemid 33109049)
64. Ramanath H, Chandrasekaran M, Chua C, Leong K, Shah K, Modeling of extrusion behavior of biopolymer and composites in fused deposition modeling, Key Eng Mater 334-335:1241-1244, 2007.
65. Tellis B, Szivek J, Bliss C, Margolis D, Vaidyanathan R, Calvert P, Trabecular scaffolds created using micro CT guided fused deposition modeling, Mater Sci Eng C 28:171-178, 2008. (Pubitemid 350297869)
66. Cheah C, Chua C, Leong K, Chua S, Development of a tissue engineering scaffold structure library for rapid prototyping, Part 1. Investigation and classification, Int J Adv Manufact Technol 21:291-301, 2003.
67. Cheah C, Chua C, Leong K, Chua S, Development of a tissue engineering scaffold structure library for rapid prototyping, Part 2. Parametric library and assembly program, Int J Adv Manufact Technol 21:302-312, 2003.
68. Cheah C, Chua C, Leong K, Cheong C, Naing M, An automatic algorithm for generating complex polyhedral scaffolds for tissue engineering, Tissue Eng 10:595-610, 2004. (Pubitemid 38580280)
69. Naing N, Chua C, Leong K, Wang Y, Fabrication of customised scaffolds using computer-aided design and rapid prototyping techniques, Rapid Prototyping J 11:249-259, 2005. (Pubitemid 41118361)
70. Salmoria G, Klauss P, Paggi R, Kanis L, Lago A, Structure and mechanical properties of cellulose based scaffolds fabricated by selective laser sintering, Polymer Test 28:648-652, 2009.
71. Hao L, Dadbakhsh S, Seaman O, Felstead M, Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development, J Mater Process Technol 209:5793-5801, 2009.
72. Eosoly S, Brabazon D, Lohfeld S, Looney L, Selective laser sintering of hydroxyap-atite/poly-[epsilon]-caprolactone scaffolds, Acta Biomater 6:2511-2517, 2010.
73. Yeong W, Chua C, Leong K, Chandrasekaran M, Lee M, Indirect fabrication of collagen scaffold based on inkjet printing technique, Rapid Prototyping J 12:229-237, 2006. (Pubitemid 44156099)
74. Yeong W, Chua C, Leong K, Chandrasekaran M, Lee M, Comparison of drying methods in the fabrication of collagen scaffold via indirect rapid prototyping, J Biomed Mater Res B Appl Biomater 82B:260-266, 2007. (Pubitemid 47015377)
75. Utela B, Storti D, Anderson R, Ganter M, A review of process development steps for new material systems in three dimensional printing (3DP), J Manufact Process 10:96-104, 2008.
76. Tan J, Chua C, Leong K, Indirect fabrication of gelatin scaffolds using rapid prototyping technology, Virtual Phys Prototyping 5:45-53, 2010.
77. Butscher A, Bohner M, Hofmann S, Gauckler L, Mller R, Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing, Acta Biomaterialia, In Press, Corrected Proof, Available online 2 October 2010.